Fabio Guidi wrote:
> the compiler build correctly the package without error message ?
> 
> Bruce Momjian ha scritto:
> 
> >I downloaded the Borland compiler and am running build tests now.

I finally got it working.  I had to make major changes to the build
file.  The new attached bcc32.mak should build on your 8.0.X system, and
this file will be in 8.0.3.

-- 
  Bruce Momjian                        |  http://candle.pha.pa.us
  pgman@candle.pha.pa.us               |  (610) 359-1001
  +  If your life is a hard drive,     |  13 Roberts Road
  +  Christ can be your backup.        |  Newtown Square, Pennsylvania 19073
# Makefile for Borland C++ 5.5

# Will build a Win32 static library libpq.lib
#        and a Win32 dynamic library libpq.dll with import library libpqdll.lib

# Borland C++ base install directory goes here
# BCB=c:\Borland\Bcc55

!IF "$(BCB)" == ""
!MESSAGE You must edit bcc32.mak and define BCB at the top
!ERROR misssing BCB
!ENDIF

!IF "$(__NMAKE__)" == ""
!MESSAGE You must use the -N compatibility flag, e.g. make -N -f bcc32.make
!ERROR missing -N
!ENDIF

!MESSAGE Building the Win32 DLL and Static Library...
!MESSAGE
!IF "$(CFG)" == ""
CFG=Release
!MESSAGE No configuration specified. Defaulting to Release.
!MESSAGE
!ELSE
!MESSAGE Configuration "$(CFG)"
!MESSAGE
!ENDIF

!IF "$(CFG)" != "Release" && "$(CFG)" != "Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running MAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE make -N -DCFG=[Release | Debug] -f bcc32.mak
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "Release" (Win32 Release DLL and Static Library)
!MESSAGE "Debug" (Win32 Debug DLL and Static Library)
!MESSAGE
!ERROR An invalid configuration was specified.
!ENDIF

!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE 
NULL=nul
!ENDIF 

!IF "$(CFG)" == "Debug"
DEBUG=1
OUTDIR=.\Debug
INTDIR=.\Debug
!ELSE
OUTDIR=.\Release
INTDIR=.\Release
!ENDIF

OUTFILENAME=blibpq

USERDEFINES=FRONTEND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP;

CPP=bcc32.exe
CPP_PROJ = -I$(BCB)\include;..\..\include -n"$(INTDIR)" -WD -c -D$(USERDEFINES) 
-tWM \
                -a8 -X -w-use -w-par -w-pia -w-csu -w-aus -w-ccc

!IFDEF DEBUG
CPP_PROJ        = $(CPP_PROJ) -Od -r- -k -v -y -vi- -D_DEBUG
!else
CPP_PROJ        = $(CPP_PROJ) -O -Oi -OS -DNDEBUG
!endif

ALL : config "$(OUTDIR)" "$(OUTDIR)\blibpq.dll" "$(OUTDIR)\blibpq.lib"

CLEAN :
        [EMAIL PROTECTED] "$(INTDIR)\getaddrinfo.obj"
        [EMAIL PROTECTED] "$(INTDIR)\pgstrcasecmp.obj"
        [EMAIL PROTECTED] "$(INTDIR)\thread.obj"
        [EMAIL PROTECTED] "$(INTDIR)\inet_aton.obj"
        [EMAIL PROTECTED] "$(INTDIR)\crypt.obj"
        [EMAIL PROTECTED] "$(INTDIR)\noblock.obj"
        [EMAIL PROTECTED] "$(INTDIR)\md5.obj"
        [EMAIL PROTECTED] "$(INTDIR)\ip.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-auth.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-protocol2.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-protocol3.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-connect.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-exec.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-lobj.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-misc.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-print.obj"
        [EMAIL PROTECTED] "$(INTDIR)\fe-secure.obj"
        [EMAIL PROTECTED] "$(INTDIR)\pqexpbuffer.obj"
        [EMAIL PROTECTED] "$(INTDIR)\pqsignal.obj"
        [EMAIL PROTECTED] "$(OUTDIR)\libpqdll.obj"
        [EMAIL PROTECTED] "$(OUTDIR)\win32.obj"
        [EMAIL PROTECTED] "$(INTDIR)\wchar.obj"
        [EMAIL PROTECTED] "$(INTDIR)\encnames.obj"
        [EMAIL PROTECTED] "$(INTDIR)\pthread-win32.obj"
        [EMAIL PROTECTED] "$(OUTDIR)\$(OUTFILENAME).lib"
        [EMAIL PROTECTED] "$(OUTDIR)\$(OUTFILENAME)dll.lib"
        [EMAIL PROTECTED] "$(OUTDIR)\libpq.res"
        [EMAIL PROTECTED] "$(OUTDIR)\$(OUTFILENAME).dll"
        [EMAIL PROTECTED] "$(OUTDIR)\$(OUTFILENAME).tds"
        [EMAIL PROTECTED] "$(INTDIR)\pg_config_paths.h"


LIB32=tlib.exe
LIB32_FLAGS= 
LIB32_OBJS= \
        "$(INTDIR)\win32.obj" \
        "$(INTDIR)\getaddrinfo.obj" \
        "$(INTDIR)\pgstrcasecmp.obj" \
        "$(INTDIR)\thread.obj" \
        "$(INTDIR)\inet_aton.obj" \
        "$(INTDIR)\crypt.obj" \
        "$(INTDIR)\noblock.obj" \
        "$(INTDIR)\md5.obj" \
        "$(INTDIR)\ip.obj" \
        "$(INTDIR)\fe-auth.obj" \
        "$(INTDIR)\fe-protocol2.obj" \
        "$(INTDIR)\fe-protocol3.obj" \
        "$(INTDIR)\fe-connect.obj" \
        "$(INTDIR)\fe-exec.obj" \
        "$(INTDIR)\fe-lobj.obj" \
        "$(INTDIR)\fe-misc.obj" \
        "$(INTDIR)\fe-print.obj" \
        "$(INTDIR)\fe-secure.obj" \
        "$(INTDIR)\pqexpbuffer.obj" \
        "$(INTDIR)\pqsignal.obj" \
        "$(INTDIR)\wchar.obj" \
        "$(INTDIR)\encnames.obj" \
        "$(INTDIR)\pthread-win32.obj"


config: ..\..\include\pg_config.h pthread.h pg_config_paths.h

..\..\include\pg_config.h: ..\..\include\pg_config.h.win32
        copy ..\..\include\pg_config.h.win32 ..\..\include\pg_config.h

pthread.h: pthread.h.win32
        copy pthread.h.win32 pthread.h

pg_config_paths.h: bcc32.mak
        echo \#define SYSCONFDIR "" > pg_config_paths.h

"$(OUTDIR)" :
        @if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

RSC=brcc32.exe
RSC_PROJ=-l 0x409 -i$(BCB)\include -fo"$(INTDIR)\libpq.res"

LINK32=ilink32.exe
LINK32_FLAGS = -Gn -L$(BCB)\lib;$(INTDIR); -x -Tpd -v
LINK32_OBJS= "$(INTDIR)\libpqdll.obj"

# @<< is a Response file, http://www.opussoftware.com/tutorial/TutMakefile.htm

"$(OUTDIR)\blibpq.dll": "$(OUTDIR)\blibpq.lib" $(LINK32_OBJS) 
"$(INTDIR)\libpq.res" blibpqdll.def 
        $(LINK32) @<<
        $(LINK32_FLAGS) +
        c0d32.obj $(LINK32_OBJS), +
        $@,, +
        "$(OUTDIR)\blibpq.lib" import32.lib cw32mti.lib, +
        blibpqdll.def,"$(INTDIR)\libpq.res"
<<
        implib -w "$(OUTDIR)\blibpqdll.lib" blibpqdll.def $@

"$(INTDIR)\libpq.res" : "$(INTDIR)" libpq.rc
        $(RSC) $(RSC_PROJ) libpq.rc

"$(OUTDIR)\blibpq.lib": $(LIB32_OBJS)
        $(LIB32) $@ @<<
+-"$(**: =" &^
+-")"
<<


"$(INTDIR)\getaddrinfo.obj" : ..\..\port\getaddrinfo.c
        $(CPP) @<<
        $(CPP_PROJ) ..\..\port\getaddrinfo.c
<<

"$(INTDIR)\pgstrcasecmp.obj" : ..\..\port\pgstrcasecmp.c
        $(CPP) @<<
        $(CPP_PROJ) ..\..\port\pgstrcasecmp.c
<<

"$(INTDIR)\thread.obj" : ..\..\port\thread.c
        $(CPP) @<<
        $(CPP_PROJ) ..\..\port\thread.c
<<

"$(INTDIR)\inet_aton.obj" : ..\..\port\inet_aton.c
        $(CPP) @<<
        $(CPP_PROJ) ..\..\port\inet_aton.c
<<

"$(INTDIR)\crypt.obj" : ..\..\port\crypt.c
        $(CPP) @<<
        $(CPP_PROJ) ..\..\port\crypt.c
<<

"$(INTDIR)\noblock.obj" : ..\..\port\noblock.c
        $(CPP) @<<
        $(CPP_PROJ) ..\..\port\noblock.c
<<

"$(INTDIR)\md5.obj" : ..\..\backend\libpq\md5.c
        $(CPP) @<<
        $(CPP_PROJ) ..\..\backend\libpq\md5.c
<<

"$(INTDIR)\ip.obj" : ..\..\backend\libpq\ip.c
        $(CPP) @<<
        $(CPP_PROJ) ..\..\backend\libpq\ip.c
<<

"$(INTDIR)\wchar.obj" : ..\..\backend\utils\mb\wchar.c
        $(CPP) @<<
        $(CPP_PROJ) /I"." ..\..\backend\utils\mb\wchar.c
<<


"$(INTDIR)\encnames.obj" : ..\..\backend\utils\mb\encnames.c
        $(CPP) @<<
        $(CPP_PROJ) /I"." ..\..\backend\utils\mb\encnames.c
<<

.c.obj:
        $(CPP) $(CPP_PROJ) $<
---------------------------(end of broadcast)---------------------------
TIP 1: subscribe and unsubscribe commands go to [EMAIL PROTECTED]

Reply via email to