On 11/16/05, William Yu <[EMAIL PROTECTED]> wrote:
> Alex Turner wrote:
> > Spend a fortune on dual core CPUs and then buy crappy disks... I bet
> > for most applications this system will be IO bound, and you will see a
> > nice lot of drive failures in the first year of operation with
> > consumer grade drives.
> > Spend your money on better Disks, and don't bother with Dual Core IMHO
> > unless you can prove the need for it.
> I would say the opposite -- you always want Dual Core nowadays. DC
> Opterons simply give you better bang for the buck than single core
> Opterons. Price out a 1xDC system against a 2x1P system -- the 1xDC will
> be cheaper. Do the same for 2xDC versus 4x1P, 4xDC versus 8x1P, 8xDC
> versus 16x1P, etc. -- DC gets cheaper by wider and wider margins because
> those mega-CPU motherboards are astronomically expensive.
Opteron 242 - $178.00
Opteron 242 - $178.00
Tyan S2882 - $377.50
Opteron 265 - $719.00
Tyan K8E - $169.00
Tyan K8E - doesn't have any PCI-X, so it's also not apples to apples.
Infact I couldn't find a single CPU slot board that did, so you pretty
much have to buy a dual CPU board to get PCI-X.
1xDC is _not_ cheaper.
Our DB application does about 5 queries/second peak, plus a heavy
insert job once per day. We only _need_ two CPUs, which is true for a
great many DB applications. Unless you like EJB of course, which will
thrash the crap out of your system.
Consider the two most used regions for DBs:
a) OLTP - probably IO bound, large number of queries/sec updating info
on _disks_, not requiring much CPU activity except to retrieve item
infomration which is well indexed and normalized.
b) Data wharehouse - needs CPU, but probably still IO bound, large
data set that won't fit in RAM will required large amounts of disk
reads. CPU can easily keep up with disk reads.
I have yet to come across a DB system that wasn't IO bound.
> DC also gives you a better upgrade path. Let's say you do testing and
> figure 2x246 is the right setup to handle the load. Well instead of
> getting 2x1P, use the same 2P motherboard but only populate 1 CPU w/ a
> DC/270. Now you have a server that can be upgraded to +80% more CPU by
> popping in another DC/270 versus throwing out the entire thing to get a
> 4x1P setup.
No argument there. But it's pointless if you are IO bound.
> The only questions would be:
> (1) Do you need a SMP server at all? I'd claim yes -- you always need 2+
> cores whether it's DC or 2P to avoid IO interrupts blocking other
> processes from running.
At least 2CPUs is always good for precisely those reasons. More than
2CPUs gives diminishing returns.
> (2) Does a DC system perform better than it's Nx1P cousin? My experience
> is yes. Did some rough tests in a drop-in-replacement 1x265 versus 2x244
> and saw about +10% for DC. All the official benchmarks (Spec, Java, SAP,
> etc) from AMD/Sun/HP/IBM show DCs outperforming the Nx1P setups.
Maybe true, but the 265 does have a 25% faster FSB than the 244, which
might perhaps play a role.
> (3) Do you need an insane amount of memory? Well here's the case where
> the more expensive motherboard will serve you better since each CPU slot
> has its own bank of memory. Spend more money on memory, get cheaper
> single-core CPUs.
Remember - large DB is going to be IO bound. Memory will get thrashed
for file block buffers, even if you have large amounts, it's all gonna
be cycled in and out again.
> Of course, this doesn't apply if you are an Intel/Dell-only shop. Xeon
> DCs, while cheaper than their corresponding single-core SMPs, don't have
> the same performance profile of Opteron DCs. Basically, you're paying a
> bit extra so your server can generate a ton more heat.
Dell/Xeon/Postgres is just a bad combination any day of the week ;)
---------------------------(end of broadcast)---------------------------
TIP 4: Have you searched our list archives?