Fernando Hevia wrote:
Database will be about 30 GB in size initially and growing 10 GB per
year. Data is inserted overnight in two big tables and during the day
mostly read-only queries are run. Parallelism is rare.
I have read about different raid levels with Postgres but the advice
found seems to apply on 8+ disks systems. With only four disks and
performance in mind should I build a RAID 10 or RAID 5 array? Raid 0
is overruled since redundancy is needed.
I am going to use software Raid with Linux (Ubuntu Server 6.06).
In my experience, software RAID 5 is horrible. Write performance can
decrease below the speed of one disk on its own, and read performance
will not be significantly more than RAID 1+0 as the number of stripes
has only increased from 2 to 3, and if reading while writing, you will
not get 3X as RAID 5 write requires at least two disks to be involved. I
believe hardware RAID 5 is also horrible, but since the hardware hides
it from the application, a hardware RAID 5 user might not care.
Software RAID 1+0 works fine on Linux with 4 disks. This is the setup I
use for my personal server.
Cheers,
mark
--
Mark Mielke <[EMAIL PROTECTED]>
