chris wrote:
My employer is a university with little funds and we have to find a cheap way to scale for the next 3 years, so the SAN seems a good chance to us.
A SAN is rarely ever the cheapest way to scale anything; you're paying extra for reliability instead.
I was thinking to put the WAL and the indexes on the local disks, and the rest on the SAN. If funds allow, we might downgrade the disks to SATA and add a 50 GB SATA SSD for the WAL (SAS/SATA mixup not possible).
If you want to keep the bulk of the data on the SAN, this is a reasonable way to go, performance-wise. But be aware that losing the WAL means your database is likely corrupted. That means that much of the reliability benefit of the SAN is lost in this configuration.
Any experiences with iSCSI vs. Fibre Channel for SANs and PostgreSQL? If the SAN setup sucks, do you see a cheap alternative how to connect as many as 16 x 2TB disks as DAS?
I've never heard anyone recommend iSCSI if you care at all about performance, while FC works fine for this sort of job. The physical dimensions of 3.5" drives makes getting 16 of them in one reasonably sized enclosure normally just out of reach. But a Dell PowerVault MD1000 will give you 15 x 2TB as inexpensively as possible in a single 3U space (well, as cheaply as you want to go--you might build your own giant box cheaper but I wouldn't recommend ). I've tested MD1000, MD1200, and MD1220 arrays before, and always gotten seriously good performance relative to the dollars spent with that series. Only one of these Dell storage arrays I've heard two disappointing results from (but not tested directly yet) is the MD3220.
-- Greg Smith 2ndQuadrant US g...@2ndquadrant.com Baltimore, MD -- Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-performance
