Ok I think I need a bit of help.
I tried the pgserver -h and I get
[timgr@gr_is2 pgserver]$ ./pgserver -h
Commandline error
[timgr@gr_is2 pgserver]$
does anyone have a full list of commands and the proper syntax.
I need to start the server in 640x480x8 mode on my framebuffer. If I start
it now I get a white screen with a cursor at 0,0 and then blue text on the
screen (from the text mode showing through). I am guessing that I'm not
telling the server to start in the correct mode.
thanks. (note I tried the commandline function -l and that also returned
the above error.)
Side note -- I just scanned the source to pgmain.c and the 'h' case is not
there in the command line processing section.
-----Original Message-----
From: Micah Dowty [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 05, 2001 9:17 AM
To: Gray, Tim
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: [Pgui-devel] a silly question.
That's one way to run it (though in that case the server won't exit
automatically)
You can just put the launcher/app that you want to run on the command line
of the server:
pgserver pgapp
Then, the server will run pgapp and exit when the last client exits.
pgserver also takes command line options to set video drivers/modes and load
themes. Take a look at 'pgserver -h' for a description.
Also note that command line options anywhere on the line are by default
processed by pgserver, if you want to pass options to the client you have to
separate the two with a --. This is a rather redundant example that shows
loading a client and running the server fullscreen:
pgserver -f -- pgapp --pgserver localhost
On Thu, 05 April 2001, "Gray, Tim" wrote:
>
> While I wait for a compile I have kind of a silly question.
>
> how do you invoke pgserver? is it like X windows where you start the
> server and then the WM or app you desire?
>
> Example
>
> pgserver&
> pgapp
>
>
>
> Then the server exits when the last app running exits.
>
>
>
>
>
> -----Original Message-----
> From: Micah Dowty [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 04, 2001 8:26 PM
> To: Gray, Tim
> Cc: [EMAIL PROTECTED]
> Subject: Re: [Pgui-devel] picoGUI compile errors.
>
>
> You need to install the GPM development libraries. (Usually the package is
> called libgpm-dev or something of that sort) The ncursesinput driver uses
> ncurses itself for keyboard, but it uses gpm directly for mouse.
> It's not a great method, because gpm scales down the resolution of the
> mouse, but I haven't gotten anything better yet. It would be nice to have
> direct drivers for serial and PS/2 mice, but I haven't gotten around to
it.
>
> Another note: You don't need the svgainput driver if you're not using the
> svgafb/svgagl video drivers too. Also note that as I've rearranged the
video
> drivers recently if it doesn't compile it's probably my fault.
>
>
> On Wed, 04 April 2001, "Gray, Tim" wrote:
>
> >
> > Ok, I have for my development station a standard Intel box with Redhat
6.2
> > on it with a clean install.
> >
> > upon compiling pgserver I get the following errors.
> >
> > fonts.tmp.c:1408: warning: initialization discards `const' from pointer
> > target type
> > rm -f fonts.tmp.c
> > gcc -o pgserver widget/bitmap.o widget/indicator.o widget/label.o
> > widget/toolbar.o widget/scroll.o widget/widget.o widget/button.o
> > widget/popup.o widget/box.o widget/field.o widget/background.o
> > widget/menuitem.o widget/checkbox.o gcore/grop.o gcore/g_malloc.o
> > gcore/div.o gcore/font.o gcore/handle.o gcore/g_error.o gcore/timer.o
> > gcore/errortext.o gcore/video.o gcore/input.o gcore/driverinfo.o
> > gcore/pgmain.o appmgr/global.o net/request.o net/dispatch.o net/eventq.o
> > vidbase/defaultvbl.o theme/memtheme.o theme/fillstyle.o video/fbdev.o
> > input/ncursesinput.o vidbase/linear8.o vidbase/linear16.o
> widget/terminal.o
> > widget/canvas.o widget/panel.o formats/pnm.o font/fontdata.o
> > input/ncursesinput.o: In function `ncursesinput_fd_activate':
> > input/ncursesinput.o(.text+0x14): undefined reference to `stdscr'
> > input/ncursesinput.o(.text+0x19): undefined reference to `wgetch'
> > input/ncursesinput.o(.text+0x163): undefined reference to `stdscr'
> > input/ncursesinput.o(.text+0x168): undefined reference to `wgetch'
> > input/ncursesinput.o(.text+0x339): undefined reference to `gpm_fd'
> > input/ncursesinput.o(.text+0x349): undefined reference to `Gpm_GetEvent'
> > input/ncursesinput.o(.text+0x398): undefined reference to `gpm_mx'
> > input/ncursesinput.o(.text+0x3a0): undefined reference to `gpm_my'
> > input/ncursesinput.o(.text+0x3d1): undefined reference to
`Gpm_FitValuesM'
> > input/ncursesinput.o: In function `ncursesinput_fd_init':
> > input/ncursesinput.o(.text+0x4f2): undefined reference to `gpm_fd'
> > input/ncursesinput.o(.text+0x507): undefined reference to `gpm_fd'
> > input/ncursesinput.o: In function `ncursesinput_init':
> > input/ncursesinput.o(.text+0x524): undefined reference to `initscr'
> > input/ncursesinput.o(.text+0x529): undefined reference to `start_color'
> > input/ncursesinput.o(.text+0x52e): undefined reference to `raw'
> > input/ncursesinput.o(.text+0x536): undefined reference to `stdscr'
> > input/ncursesinput.o(.text+0x53b): undefined reference to `meta'
> > input/ncursesinput.o(.text+0x540): undefined reference to `noecho'
> > input/ncursesinput.o(.text+0x545): undefined reference to `nonl'
> > input/ncursesinput.o(.text+0x54d): undefined reference to `stdscr'
> > input/ncursesinput.o(.text+0x552): undefined reference to `intrflush'
> > input/ncursesinput.o(.text+0x55a): undefined reference to `stdscr'
> > input/ncursesinput.o(.text+0x55f): undefined reference to `keypad'
> > input/ncursesinput.o(.text+0x566): undefined reference to `curs_set'
> > input/ncursesinput.o(.text+0x56e): undefined reference to `stdscr'
> > input/ncursesinput.o(.text+0x573): undefined reference to `nodelay'
> > input/ncursesinput.o(.text+0x59e): undefined reference to `Gpm_Open'
> > input/ncursesinput.o(.text+0x5ac): undefined reference to
`gpm_zerobased'
> > input/ncursesinput.o: In function `ncursesinput_close':
> > input/ncursesinput.o(.text+0x5c5): undefined reference to `Gpm_Close'
> > input/ncursesinput.o(.text+0x5cf): undefined reference to `stdscr'
> > input/ncursesinput.o(.text+0x5d4): undefined reference to `wclear'
> > input/ncursesinput.o(.text+0x5da): undefined reference to `stdscr'
> > input/ncursesinput.o(.text+0x5df): undefined reference to `wrefresh'
> > input/ncursesinput.o(.text+0x5e4): undefined reference to `endwin'
> > collect2: ld returned 1 exit status
> > make: *** [pgserver] Error 1
> > [timgr@gr_is2 pgserver]$
> >
> > Here is my configuration.
> >
> >
> > sh configscript/Configure config.in
> > #
> > # Using defaults found in .config
> > #
> > *
> > * Target System
> > *
> > Platform (Linux, uClinux, Windows) [Linux]
> > defined LINUX
> > x86 asm optimization (ASM_INTEL) [N/y/?] (NEW)
> > *
> > * Debugging
> > *
> > Enable text messages (CONFIG_TEXT) [N/y/?]
> > Debugging symbols in binary (CONFIG_NOSTRIP) [N/y/?]
> > Debugging keys (DEBUG_KEYS) [N/y/?] (NEW)
> > Video test mode (CONFIG_VIDEOTEST) [N/y/?]
> > Disable compiler optimization (CONFIG_NO_OPTIMIZE) [N/y/?]
> > Electric Fence malloc debugging (CONFIG_EFENCE) [N/y/?]
> > gcov coverage analysis (CONFIG_GCOV) [N/y/?]
> > gprof profiling (CONFIG_GPROF) [N/y/?]
> > Terminal prints unknown escapes (BOTHERSOME_TERMINAL) [N/y/?] (NEW)
> > Widget debugging (DEBUG_WIDGET) [N/y/?] (NEW)
> > Event debugging (DEBUG_EVENT) [N/y/?] (NEW)
> > Video debugging (DEBUG_VIDEO) [N/y/?] (NEW)
> > Theme debugging (DEBUG_THEME) [N/y/?] (NEW)
> > Client/server debugging (DEBUG_NET) [N/y/?] (NEW)
> > Initialization debugging (DEBUG_INIT) [N/y/?] (NEW)
> > Memory debugging (DEBUG_MEMORY) [N/y/?] (NEW)
> > *
> > * Fonts
> > *
> > Helvetica 10 (default font) (FONT_HELVETICA10) [Y/n/?]
> > Clean 12 (default fixed-width font) (FONT_CLEAN12) [Y/n/?]
> > Lucida 10 (FONT_LUCIDA10) [N/y/?] (NEW)
> > Clean 6 (FONT_CLEAN6) [N/y/?] (NEW)
> > Console 8 (FONT_CONSOLE8) [N/y/?] (NEW)
> > Courier 12, 12b (FONT_COURIER12) [N/y/?] (NEW)
> > Helvetica 8 (FONT_HELVETICA8) [N/y/?] (NEW)
> > Times 10, 10b (FONT_TIMES10) [N/y/?] (NEW)
> > Utopia 25 (FONT_UTOPIA25) [N/y/?] (NEW)
> > *
> > * Video Drivers
> > *
> > Linux framebuffer device (DRIVER_FBDEV) [Y/n/?]
> > SDL framebuffer driver (DRIVER_SDLFB) [N/y/?] (NEW)
> > SVGAlib framebuffer driver (DRIVER_SVGAFB) [N/y/?] (NEW)
> > SVGAlib vgagl driver (DRIVER_SVGAGL) [N/y/?] (NEW)
> > Motorola 68EZ328 LCD driver (DRIVER_EZ328) [N/y/?] (NEW)
> > Ncurses driver (DRIVER_NCURSES) [N/y/?] (NEW)
> > Null driver (DRIVER_NULL) [N/y/?] (NEW)
> > *
> > * Input Drivers
> > *
> > SDL input driver (DRIVER_SDLINPUT) [N/y/?] (NEW)
> > SVGAlib input driver (DRIVER_SVGAINPUT) [Y/n/?] n
> > Ncurses/GPM input driver (also for framebuffer) (DRIVER_NCURSESINPUT)
> > [Y/n/?]
> > Touchscreen input driver (DRIVER_TSINPUT) [N/y/?] (NEW)
> > *
> > * Video Base Libraries
> > *
> > Linear framebuffer @ 1bpp (CONFIG_VBL_LINEAR1) [N/y/?]
> > Linear framebuffer @ 2bpp (CONFIG_VBL_LINEAR2) [N/y/?]
> > Linear framebuffer @ 4bpp (CONFIG_VBL_LINEAR4) [N/y/?]
> > Linear framebuffer @ 8bpp (CONFIG_VBL_LINEAR8) [Y/n/?]
> > Linear framebuffer @ 16bpp (CONFIG_VBL_LINEAR16) [Y/n/?]
> > Video rotation support (CONFIG_ROTATE) [N/y/?]
> > *
> > * Widget Options
> > *
> > Terminal widget (VT102 emulator) (CONFIG_WIDGET_TERMINAL) [Y/n/?]
> > Canvas widget (for arbitrary graphics) (CONFIG_WIDGET_CANVAS) [Y/n/?]
> > Disable panelbar (CONFIG_NOPANELBAR) [N/y/?]
> > Solid panel dragging (CONFIG_DRAGSOLID) [N/y/?]
> > *
> > * Bitmap Formats
> > *
> > Internal XBM loader (CONFIG_FORMAT_XBM) [Y/n/?]
> > PNM: portable anymap (CONFIG_FORMAT_PNM) [Y/n/?]
> > *
> > * Security
> > *
> > Disable remote input devices (CONFIG_NOREMOTEINPUT) [N/y/?]
> > Disable exclusive resource access (CONFIG_NOEXCLUSIVE) [N/y/?]
> > Client packet size limit in bytes (CONFIG_MAXPACKETSZ) [5000000]
> > Client quotas (not implemented) (CONFIG_QUOTA) [N/y/?]
> >
> > *** End of PicoGUI configuration. Now run 'make'
> > [timgr@gr_is2 pgserver]$
> >
> > I am using last night's CVS snapshot. any ideas?
> >
> >
> > thanks.
> >
> >
> > _______________________________________________
> > Pgui-devel mailing list
> > [EMAIL PROTECTED]
> > http://lists.sourceforge.net/lists/listinfo/pgui-devel
>
> --
> perl -e'socket S,2,1,tcp;connect S,pack(H16,"0200029a80692d32").\0x8;print
> grep!/=/,<S>'
>
>
> _______________________________________________
> Pgui-devel mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/pgui-devel
>
>
> _______________________________________________
> Pgui-devel mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/pgui-devel
--
perl -e'socket S,2,1,tcp;connect S,pack(H16,"0200029a80692d32").\0x8;print
grep!/=/,<S>'
_______________________________________________
Pgui-devel mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/pgui-devel
