Hi,
Yes it's using ez328vga driver.i divided the two sysclck from pll control
register(0xfffff200) instead of change timing.(because the ucdimm's lcd clock
divider was break down 2 weeks ago)
other hand i don't have enough info about vga monitor.(what is the
frequencies of vsync and hsync signals for running properly).
i measured the frequencies of vsync and hsync signals while the image is
stable on monitor.these values below.
i assumed these values are true for vga monitor and tried change the hsync
and vsync values but i couldn't measure both of signals's frequencies
aprroxiametly below values.
----------------
vsync = 56.62 Hz
hsync = 28.98 kHz
---------------
i will try change the timing for vz328 after picogui runs on uCdimm with lcd.
Sincerely,
YYA
------------------------------
On Friday 13 July 2001 00:45, you wrote:
> Is this using the ez328vga driver?
> Wow, never thought it would be useful... (a little like the ncurses driver
>
> :)
>
> With the VZ328 you should be able to get better resolution than the 120x480
> i can get with the EZ328. Could you send me the modified timings? I would
> like to add a config menu option so the driver can work with either the
> ez328 or vz328.
>
> On Thu, 12 Jul 2001 08:42:10 Yunus Yucel Altunbicak wrote:
> > Hi all,
> > at last i could run Picogui on uCdimm with vga monitor.i will try use
> > lcd(320x240) soon.
> >
> > Sincerely
> > YYA
> >
> > _______________________________________________
> > Pgui-devel mailing list
> > [EMAIL PROTECTED]
> > http://lists.sourceforge.net/lists/listinfo/pgui-devel
_______________________________________________
Pgui-devel mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/pgui-devel
