Hello! I'm trying to bring our old backlight timeout back to life.
To toggle the backlight, I'm launching pgserver with a specific option : pgserver --timers.backlightoff=100 (this should be a 10 sec timeout). Now, in the fbdev.c framebuffer file, I catch the driver messages : - PGDM_BACKLIGHT=0 (turn off) - PGDM_POWER=PG_POWER_FULL (turn on) and I do an ioctl on the lowlevel framebuffer driver accordingly. Trouble is, when I start up pgserver : 1. I immediately get a PGDM_BACKLIGHT event. Not even waiting for the timeout to occur. 2. I correctly get the PGDM_POWER events, but no more any PGDM_BACKLIGHT timeout event, even after being idle for a loooong time. Is the backlight timeout not supported anymore? Any idea before I dig further into the timers? I thanks you in advance! Thierry -- Thierry Th�voz Software Engineer SMARTDATA PSE-B / EPFL CH-1015 Lausanne http://www.smartdata.ch mailto:[EMAIL PROTECTED] phone: +41(0) 21 693 84 98 fax: +41(0) 21 693 84 91 ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Pgui-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/pgui-devel
