[PATCH v3 2/6] arm64: dts: qcom: sm8350: Fix DMA0 address

[Nia Espera]

DMA0 node downstream is specified at 0x900000, so fix the typo. Without
this, enabling any i2c node using DMA0 causes a hang.

Fixes: bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Fixes: 41d6bca799b3 ("arm64: dts: qcom: sm8350: correct DMA controller unit 
address")
Reviewed-by: Konrad Dybcio <konrad.dyb...@linaro.org>
Signed-off-by: Nia Espera <nesp...@igalia.com>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi 
b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 00604bf7724f..6d12066389fa 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -918,9 +918,9 @@ spi19: spi@894000 {
                        };
                };
 
-               gpi_dma0: dma-controller@9800000 {
+               gpi_dma0: dma-controller@900000 {
                        compatible = "qcom,sm8350-gpi-dma", 
"qcom,sm6350-gpi-dma";
-                       reg = <0 0x09800000 0 0x60000>;
+                       reg = <0 0x00900000 0 0x60000>;
                        interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,

-- 
2.42.1