I'll have to check my Columbia book when I get home but many of them have the feed screw under a cover, usually below the reproducer. You should have some kind of lever that lowers the reproducer onto the cylinder and at the same time, lowers the half nut onto the feed screw. You may want to try oiling through the little holes that you see too. Make sure the reproducer slides back and forth freely in the upper position.
Ron -----Original Message----- From: [email protected] [mailto:[email protected]]on Behalf Of Friedhelm W. Maur Sent: Friday, October 31, 2003 11:01 AM To: [email protected] Subject: [Phono-L] Graphophone C or Universal Hello all, I just got a Graphophone C but I did not find a feedscrew and the reproducer will not move on an Edison Cylinder when I put one on. Am I missing something or what do I make wrong? Also is the position of the repcoducer a little too high to reach the cylinder when properly mounted. It is a reproducer that can record and play with 2 glass needles. Maybe it is the wrong one of the model? Any help would be greatly appreciated. Best regards and have a good weekend. Friedhelm -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup CareerBuilder.com has over 400,000 jobs. Be smarter about your job search http://corp.mail.com/careers _______________________________________________ Phono-l mailing list [email protected] http://t2.cwihosting.com/mailman/listinfo/phono-l_oldcrank.com
