There does not seem to be any connection between the brass sleeve and the inner steel(?) drive shaft. How is the brass sleeve supposed to be pulled along?
Ron L -----Original Message----- From: phono-l-bounces at oldcrank.org [mailto:[email protected]] On Behalf Of Greg Bogantz Sent: Saturday, August 30, 2008 2:32 AM To: Antique Phonograph List Subject: Re: [Phono-L] Wide Columbia belts and more The brass sliding sleeve is part of the telescoping drive shaft that turns the amber wheel. There are three sections to this driveshaft and when the reproducer is at the extreme start of the record, the brass section sticks out of the left side of the support casting. But when the reproducer has extended all the way to the opposite end of the long mandrel, the brass section is pulled with it as the driveshaft extends. Greg Bogantz ----- Original Message ----- From: "Ron L'Herault" <[email protected]> To: "'Antique Phonograph List'" <phono-l at oldcrank.org>; <phonolist at yahoogroups.com> Sent: Friday, August 29, 2008 11:42 PM Subject: [Phono-L] Wide Columbia belts and more > Oh wise and learned members, Is there anyone who sells the wide Columbia > belts with stitching as found on machines such as the BG and BC? > > I saw my first BC today. It seems to have a modern replacement for the > vulcanite "shoe". Does anyone have an original instruction sheet for this > baby? I'd like to know what the sliding brass sleeve on the drive shaft > to > the amber wheel does, for instance. > > Thanks, > > Ron L > > > > > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
