Hi Tim well, I did more research and found out that the horn you have is also for a Vic IV. The b/b horn for the three should only be 21 inches long. I think I iwll wait and try to find a shorter horn. This horn is also 24 inches long. Arrgh! maybe I iwll just stick to a 21 inch morning glory, they seem to be easier to find than a b/b horn! Thanks again for your kind offer. John
--- On Sun, 8/31/08, Phonophan at aol.com <Phonophan at aol.com> wrote: From: Phonophan at aol.com <[email protected]> Subject: Re: [Phono-L] Anyone wanna trade Victor horns? To: phono-l at oldcrank.org Date: Sunday, August 31, 2008, 5:09 AM Hi, John---- I'll swap you Victor brass bell horn for a Victor flower horn as long as we both agree ---- please contact me directly and send some pictures of it. Cheers, Tim Fabrizio phonophan PO Box 747 Henrietta, NY 14467 TEL 585 582 1586 FAX 585 582 2624 Web site: www.phonophan.com In a message dated 8/31/2008 7:18:34 A.M. Eastern Daylight Time, john9ten at pacbell.net writes: Hi all I bought a Victor III that has a Victor IV horn on it, that is to say it should have the 19-1/2 inch morning glory horn and it has the 22" horn. The decal is decent, as is the horn. Does anyone have the appropriate brass belled horn available for trade etc? Or maybe the 19" morning glory? I prefer the brass belled horn though. Thanks for any help! John Robles _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org **************It's only a deal if it's where you want to go. Find your travel deal here. (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047) _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
