Hello all, I figured I would post my want list one more time before the holidays in search of that special gift for ME. I am looking for a nice Edison Triumph 2/4 machine and/or a Columbia BGT ---- must have original finish. Looking to put some money in your stocking before the holidays. If you have a nice piece you are willing to part with -please contact me off line at: [email protected]_ (mailto:[email protected]) Thank you Pete **************Get the Moviefone Toolbar. Showtimes, theaters, movie news & more!(http://pr.atwola.com/promoclk/100000075x1212774565x1200812037/aol?redir=htt p://toolbar.aol.com/moviefone/download.html?ncid=emlcntusdown00000001) From [email protected] Thu Nov 13 13:20:19 2008 From: [email protected] (Mike Tucker) Date: Thu Nov 13 15:27:37 2008 Subject: [Phono-L] Edison Class M Message-ID: <c6ba3154c1824d17826462507b543...@mikefb1afb33f4>
Hi, I would appreciate your posting the following note. Mike Tucker A friend and I are in the process of restoring two of the upright coin slots which use the Class M electric motor. They are the same as the one described as "Unidentified Class M of about 1905" at page 246 of the latest edition of Frow's cylinder machine book. They have the wooden feet instead of the more familiar ball and claw ones and a somewhat similar cabinet to the Majestic. I would particularly appreciate any information anyone has as to the correct backboard for these machines (If they had one - our cabinets are in transit, so I can't verify this at the moment), but any information on this or the phonograph generally would be appreciated. I can be contacted via Email at [email protected] Thanks, Mike Tucker From [email protected] Thu Nov 13 15:44:42 2008 From: [email protected] ([email protected]) Date: Thu Nov 13 15:49:56 2008 Subject: [Phono-L] re Victor VI dimension needed Message-ID: <[email protected]> IN REGARDS TO DIMENSIONS you might check with bob baumbach book on the victor data book it contains all of this i believe or contact bob himself good luck on the project In a message dated 11/13/2008 8:02:11 A.M. Eastern Standard Time, [email protected] writes: Hi All, I'm after a couple of dimensions of a later (second motor) style Victor VI horn machine. Could someone please tell me: 1. Base dimensions - as in the actual "footprint" 2. Height (bottom of case to the top of motorboard) I really need to get accurate dimensions. Thanks in advance for your help! Cheers, Mario _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org **************Get the Moviefone Toolbar. Showtimes, theaters, movie news & more!(http://pr.atwola.com/promoclk/100000075x1212774565x1200812037/aol?redir=htt p://toolbar.aol.com/moviefone/download.html?ncid=emlcntusdown00000001) From [email protected] Thu Nov 13 18:52:41 2008 From: [email protected] (Mark Lynch) Date: Thu Nov 13 19:04:17 2008 Subject: [Phono-L] Help with Opera/1B Mandrel Finish Message-ID: <[email protected]> Greetings, Does anyone here have experience recreating the brownish-black finish found on the Edison Opera and Amberola 1B mandrel? It appears to be a chemical finish on the brass surface as opposed to a plated finish. I'd be most grateful to talk to someone who has first-hand experience or can refer me to the right person. Best Regards, Mark Silver Spring, M
