Hi Ron I went to George first, as I usually do! He had a shaver, but no screws separately. I have a feeling they are going to be hard to find... Thanks John
--- On Wed, 2/4/09, Ron L <[email protected]> wrote: > From: Ron L <[email protected]> > Subject: RE: [Phono-L] Screws needed > To: "'Antique Phonograph List'" <[email protected]> > Date: Wednesday, February 4, 2009, 6:12 AM > If no one comes forward, John, and I'll bet George > Vollema can help, take > the shaver to an industrial mill supply store. They will > have all manner of > set screws from the minute to the massive, and should be > able to find > something to fit. I don't think Tom bothered to > re-invent the screw so they > should be a more or less standard thread and diameter. > Finding out which > standard will be the trick. 8-) > > Ron L > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On > Behalf Of john robles > Sent: Wednesday, February 04, 2009 1:16 AM > To: [email protected] > Subject: [Phono-L] Screws needed > > Hello all > I am in desperate need of a set of four screws for an > Edison Trimph shaving > device. I know these will be hard to get. Failing tha, does > anyone know the > thread on those so I can perhaps ge someting temporary til > I do find the > screws? > I would appreciat it very much! > Thanks > John > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org > > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org From [email protected] Wed Feb 4 08:05:02 2009 From: [email protected] (Ron L) Date: Wed Feb 4 08:05:21 2009 Subject: [Phono-L] Screws needed In-Reply-To: <[email protected]> References: <[email protected]> <[email protected]> Message-ID: <[email protected]> Maybe George has the time to take one of the screws out and take a picture. With that in hand, the Mill Supply store may be able to help. APSCO and Wyatt's are, of course, other choices for the screws. Ron L -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of john robles Sent: Wednesday, February 04, 2009 10:02 AM To: Antique Phonograph List Subject: RE: [Phono-L] Screws needed Hi Ron I went to George first, as I usually do! He had a shaver, but no screws separately. I have a feeling they are going to be hard to find... Thanks John --- On Wed, 2/4/09, Ron L <[email protected]> wrote: > From: Ron L <[email protected]> > Subject: RE: [Phono-L] Screws needed > To: "'Antique Phonograph List'" <[email protected]> > Date: Wednesday, February 4, 2009, 6:12 AM > If no one comes forward, John, and I'll bet George > Vollema can help, take > the shaver to an industrial mill supply store. They will > have all manner of > set screws from the minute to the massive, and should be > able to find > something to fit. I don't think Tom bothered to > re-invent the screw so they > should be a more or less standard thread and diameter. > Finding out which > standard will be the trick. 8-) > > Ron L > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On > Behalf Of john robles > Sent: Wednesday, February 04, 2009 1:16 AM > To: [email protected] > Subject: [Phono-L] Screws needed > > Hello all > I am in desperate need of a set of four screws for an > Edison Trimph shaving > device. I know these will be hard to get. Failing tha, does > anyone know the > thread on those so I can perhaps ge someting temporary til > I do find the > screws? > I would appreciat it very much! > Thanks > John > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org > > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
