hi the original show the reproducer reading upside down the repro shows it right side up as they were used on coinops In a message dated 3/2/2009 2:13:49 P.M. Eastern Standard Time, [email protected] writes:
I have a photo of a gutta percha brown Columbia recorder, is there anyone who could give me an idea if it is a reproduction? I will send the photo to any one who can help. Steve _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org **************A Good Credit Score is 700 or Above. See yours in just 2 easy steps! (http://pr.atwola.com/promoclk/100126575x1219957551x1201325337/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID %3D62%26bcd%3DfebemailfooterNO62) From [email protected] Mon Mar 2 13:41:49 2009 From: [email protected] (shane nolan) Date: Mon Mar 2 13:44:08 2009 Subject: [Phono-L] retarmysgt (William) post regarding Gramophoneshane Message-ID: <[email protected]> Thank you for comments everybody. This video was originally made to show "basically" what was involved with removing a spring, and was posted in a thread on the old OTVMMB in a discussion with some members that hadn't even seen the inside of a barrel. It was never intended to be an instructional video for someone who has never touched a phono motor before. The spring is a small Thorens spring, which is mentioned if you read the discription box, where I also recommend wearing gloves, eye protection, and that a beginner should not attempt a large spring like a diamond disc, if they have never done a spring before. I also mention using a jig to hold the barrel, giving you two hands to manipulate the spring. Once you've got the hang of smaller springs though, larger springs are not impossible to do in exactly the same way. I will be adding another video to this one, showing a "real" spring being removed & replaced. I have been trying to get to it for a couple weeks now, but haven't found the time as yet. It will be posted in the next couple days though, using a diamond disc spring, and perhaps a large Victor double spring barrel as well. However, I will not be using jigs or gloves, because I have never used them since I started doing springs when I was 13 years old. I will be recommending the use of both in the video however, as it seem most people can't be bothered reading the discription box. One piece of advise that was posted, I must say I disagree with, and that is using multi-grips on the spring. This can score the steel & lead to spring breakage. Stay connected to the people that matter most with a smarter inbox. Take a look http://au.docs.yahoo.com/mail/smarterinbox From [email protected] Mon Mar 2 14:03:24 2009 From: [email protected] (Walt Sommers) Date: Mon Mar 2 14:09:40 2009 Subject: [Phono-L] Re: Small Spring Service on YouTube In-Reply-To: <[email protected]> References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> Message-ID: <[email protected]>
