Oh, I feel the pain.

Ron

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of F. Korzatkowski
Sent: Friday, March 20, 2009 3:52 AM
To: Antique Phonograph List
Subject: RE: [Phono-L] Ultona tone arm won't rotate


Hi Ron,
  I didn't let you down.  Another member sugessted I remove
the arm and reduce the diameter.  I did this and it worked
just fine, however, I was able to snatch defeat from the
Jaws or Victory when I dropped in the floor and broke it
in half.  Luckly I was able to put a dowel in it andit works
fine.  If I have to move the weight towards the front I may
have a problem.  
  Thanks again for the help.
Joe


--- On Thu, 3/19/09, Ron L'Herault <[email protected]> wrote:

> From: Ron L'Herault <[email protected]>
> Subject: RE: [Phono-L] Ultona tone arm won't rotate
> To: "'Antique Phonograph List'" <[email protected]>
> Date: Thursday, March 19, 2009, 7:03 PM
> You got lucky on that one, Joe.?
> Those metal castings often just break
> apart.? I've got one with a crack that formed as it
> just sat there.
> 
> Ron L
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]
> On
> Behalf Of F. Korzatkowski
> Sent: Thursday, March 19, 2009 6:47 PM
> To: Antique Phonograph List
> Subject: RE: [Phono-L] Ultona tone arm won't rotate
> 
> 
> Hello Ron,
> ? Thanks.
> ? I put it in the freezer for 20 minutes and then
> warmed it up
> kinda quick.? It still didn't move so I took it out to
> the
> garage, put it in the vice(carefully padded) and used a
> padded
> pipe to rotate it.? It is moving and now can be
> adjusted to
> play discs etc.? But the arm has to be removed.?
> Maybe it'll
> loosen up in time. I put a small amout of rig greese at
> the
> joint and maybe it'll work it's was in in time.? No
> hurry.
> The PB spray is a good idea too. I would have not thought
> of your method.
> ? Thank you for your interest and assistance.
> Joe
> 
> --- On Thu, 3/19/09, Ron L <[email protected]>
> wrote:
> 
> > From: Ron L <[email protected]>
> > Subject: RE: [Phono-L] Ultona tone arm won't rotate
> > To: "'Antique Phonograph List'" <[email protected]>
> > Date: Thursday, March 19, 2009, 1:20 PM
> > Joe,
> > 
> > You might be able to rotate the head if you put the
> whole
> > assembly in the
> > freezer for a while.? If that doesn't work, they you
> > could also repeat the
> > freezer and when you take it out, warm the
> > head.???A bit of PB blaster on
> > the joint will help too.
> > 
> > Ron L
> > 
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]]
> > On
> > Behalf Of F. Korzatkowski
> > Sent: Thursday, March 19, 2009 3:52 PM
> > To: [email protected]
> > Subject: [Phono-L] Ultona tone arm won't rotate
> > 
> > 
> > Hello,
> >? I'm new.
> >? I just purchased a Bruswick record player.? It
> is a
> > cabinet model
> > with bulit in record rack.? It's about 3 feet wide
> and
> > 21.5 inches
> > deep. The Brunswick all phonographs in one, Model Q,
> Serial
> > number is
> > 133,774. Last copyright is May 181920.
> >? My problem is the tonearm wont rotate. The pin
> lock pin
> > was taken out and
> > it still wond work. It seems to be frozen at the head
> and
> > the sound shaft.
> > I'm afraid to force it or dump WD-40 into it.?
> What's
> > the best way to fix
> > this so I could play all the various records.? I
> > didn't know it had three
> > needles on it, so duh.? It does play well with the
> > steel needle.
> > ? I always wanted one of these and but was too
> stupid/
> > lazy to investigate
> > prior to buying, but what's new, huh.
> > ? Also anybody know what year it was made.
> > ? Any help would be appreciated.
> > Thanks,
> > ? Joe
> > 
> > 
> > 
> > ? ? ? 
> > _______________________________________________
> > Phono-L mailing list
> > http://phono-l.oldcrank.org
> > 
> > _______________________________________________
> > Phono-L mailing list
> > http://phono-l.oldcrank.org
> > 
> 
> 
> ? ? ? 
> _______________________________________________
> Phono-L mailing list
> http://phono-l.oldcrank.org
> 
> _______________________________________________
> Phono-L mailing list
> http://phono-l.oldcrank.org
> 


      
_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org

Reply via email to