I used to own an HMV 163, and have attached a photo of the area that
you are interested in.
-------------- ATTACHMENT --------------
**An Attachment Was Scrubbed**
Name: HMV-163-Needle-Cups.jpg
Type: image/jpeg
Size: 61860 bytes
URL:
<http://oldcrank.org/pipermail/phono-l/attachments/20090728/7d07b147/attachment.jpg>
-------------- ATTACHMENT --------------
On MondayJuly 27, 2009, at 9:52 PM, [email protected] wrote:
In a message dated 7/22/2009 1:42:29 PM Pacific Daylight Time,
[email protected] writes:
The slots are to store Tungs-tone needle tins vertically. If the
hole has
a
flat bottom it indeed where the used needle receiver goes. If rounded,
it's
to be filled with fresh steel needles. Usually the slots have a
metal trim
piece around them.
Bruce
Bruce, Thanks for your reply! The slots don't have any metal trim.
Perhaps it is available somewhere? I have a Victor Tungstone tin
and will try
it out to see if it fits.
Does anyone reading this have an HMV - 163? I'd love to see a
picture of
the side of the motorboard with the needle receptacles, to know what
I'm
looking for. Since the waste-needle cup is missing from this
machine and
there are the empty slots in the wood on either side I suspect
there's a
single unit that fits into the space.
All the Best,
: )
Edward
**************A Good Credit Score is 700 or Above. See yours in just
2 easy
steps!
(http://pr.atwola.com/promoclk/100126575x1221823322x1201398723/aol?redir=http://www.freecreditreport.com/pm/default.aspx
?sc=668072&hmpgID=115&bcd
=JulystepsfooterNO115)
_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org
_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org
