George Vollema may be able to help with the grill and cloth. I got one for an 8-12 from him that was pristine.
Ron L -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of mark french Sent: Tuesday, February 09, 2010 4:20 AM To: [email protected] Subject: [Phono-L] WTD: Grille for 4-door Credenza I just picked up a decent Victrola Credenza 4-door that I've started to fix up, the one important thing it's missing is the entire horn grille and cloth. Condition of finish and/or cloth not important, I can refinish it and/or put new cloth in it. Thanks! Side notes - this machine has some WEIRD mods. For example, eons ago somebody tapped into the horn elbow and added an iron pipe T-fitting. (??) But both ends of it are just open to air, I'll have to remove that and put in a plug, talk about ruining the bass! And there's a 6-inch hole cut into the lower section of the horn wood, like a speaker had been mounted there with three screws, or something. Plus an additional a/c wire was added to the motor connector socket, but whatever it was hooked to is gone. Anybody have any ideas of what they were doing, or trying to do, with this thing? I assume at one time there was a hose connected to that fitting, for what I have NO idea. The vent hole cover near it is missing, maybe that is where the hose or pipe exited. Pretty sure I can fix all this stuff fortunately. Mark French My Victrolas: VV-210 10-50 Credenza VV-XVII _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
