Looking at the leaning reproducer again, I noticed that the needlebar is the
part that is leaning. Is there a needlebar adjustment on this reproducer, like
on a Victor machine?
> From: [email protected]
> To: [email protected]
> Date: Sun, 14 Feb 2010 13:41:03 -0500
> Subject: Re: [Phono-L] Columbia 122 angle correct?
>
>
> When examining both pictures, you will notice that the reproducers are
> different, even though they appear to have the same cutout pattern. The one
> that leans looks like it is larger than the other - maybe not significantly -
> but just enough to skew the angle.
>
>
>
> Curt
>
> > Date: Sun, 14 Feb 2010 11:59:26 -0500
> > From: [email protected]
> > To: [email protected]
> > Subject: Re: [Phono-L] Columbia 122 angle correct?
> >
> > There is something wrong. Regardless of whether it is the correct tone
> > arm for the machine, or the correct reproducer, the shaft of the needle
> > must be straight up and down when viewed from the front. It should
> > never lean into the groove at a sideways angle. Period.
> >
> > Chris
> >
> > Keith Wright wrote:
> > > It looks like it. I have now included a side picture the owner sent.
> > >
> > > http://keithwright.ca/columbia122/columbiaport122%20angle.html
> > >
> > > Compare to another 122 shown below. The owner of this one has not replied
> > > to a request for more pictures.
> > >
> > > http://keithwright.ca/columbia122/columbiaport122.html
> > >
> > > Anyone got pictures of their 122 with the correct angle?
> > >
> > > Thanks,
> > > Keith
> > >
> > >
> > >> From: [email protected]
> > >> To: [email protected]
> > >> Date: Wed, 3 Feb 2010 12:35:58 -0500
> > >> Subject: Re: [Phono-L] Columbia 122 angle correct?
> > >>
> > >> Is that the correct reproducer ?
> > >>
> > >> ----- Original Message -----
> > >> From: "Keith Wright" <[email protected]>
> > >> To: <[email protected]>
> > >> Sent: Tuesday, February 02, 2010 9:25 PM
> > >> Subject: [Phono-L] Columbia 122 angle correct?
> > >>
> > >>
> > >>
> > >>> Hi Folks,
> > >>>
> > >>> Some one I know with a Columbia 122 portable pointed out the angle at
> > >>> which the reproducer leans at the end of the arm. I didn't think
> > >>> anything
> > >>> of it until I compared it with one of my HMVs. Is there some problem
> > >>> with
> > >>> the Columbia or is this an inherent flaw with the make/model? I've
> > >>> posted
> > >>> the photos on the page below (it should work with a copy-and-paste):
> > >>>
> > >>> http://keithwright.ca/columbia122/columbiaport122%20angle.html
> > >>>
> > >>> Thanks,
> > >>> Keith
> > >>>
> > >> _______________________________________________
> > >> Phono-L mailing list
> > >> http://phono-l.oldcrank.org
> > >>
> > >
> > > _________________________________________________________________
> > >
> > > _______________________________________________
> > > Phono-L mailing list
> > > http://phono-l.oldcrank.org
> > >
> > >
> > _______________________________________________
> > Phono-L mailing list
> > http://phono-l.oldcrank.org
>
> _________________________________________________________________
> Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
> http://clk.atdmt.com/GBL/go/201469226/direct/01/
> _______________________________________________
> Phono-L mailing list
> http://phono-l.oldcrank.org
_________________________________________________________________
Hotmail: Powerful Free email with security by Microsoft.
http://clk.atdmt.com/GBL/go/201469230/direct/01/
_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org
