Terry Baer([email protected]) You could also try Terry Baer as he sells triumph parts.
Steve > > Hello again Gabriel: > > Your serial number puts the machine just a few hundred below the > introduction of the Triumph. The motor number is correct for that machine. > All good > news since the Speed Control Knob was standardized by this time so there > should be no problem locating the correct part. I suspect the person who > sold > you the speed control may have thought it was for a Triumph/Springmotor but > it likely is for a Home A or Standard A, possibly even for an ICS machine > made much later. At the moment all of my machines are in storage so I cannot > take a thread gauge and micrometer to determine what the correct screw size > is for a Springmotor. I do remember that the 'suitcase Home' speed knob is > a 10-32 thread. It is optimally 0.190" in diameter. If you have a > micrometer you can check the diameter of the shaft that is too narrow. > > I will keep digging. Meanwhile, give Dwayne a call at Wyatt's, I would bet > he has an early Triumph Speed Control Knob of correct thread. > > Best wishes, > > Al > > > > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
