I have seen asphaltum at Dick Blick, I have heard it takes a long time to cure 
but you can put it on thick.  I do know that painting with a can is a pain as 
you have to fill up the pot holes.  Have you ever used it?
 

> Date: Fri, 19 Aug 2011 11:19:52 -0500
> From: [email protected]
> To: [email protected]
> Subject: Re: [Phono-L] Abrasive Blast Cabinet
> 
> Asphaltum is still available and it is not difficult to repair, even a 
> well chipped bedplate. If you do strip it then asphaltum is what the 
> original finish base coat was was.
> 
> On 08/19/2011 10:36 AM, Steven Medved wrote:
> >
> > I suggest you do not strip the bedplates unless it is necessary as it 
> > appears on your F bedplate. The castings are very rough, I stripped one and 
> > was amazed at all the surface defects, some were deep. I believe Edison 
> > used asphaltum that fills in the defects, I wound up using JB Weld on some 
> > of the pot holes.
> >
> >
> >> To: [email protected]
> >> From: [email protected]
> >> Date: Thu, 18 Aug 2011 02:17:04 -0400
> >> Subject: [Phono-L] Abrasive Blast Cabinet
> >>
> >>
> >> Hello everyone,
> >>
> >> My wife just got me an abrasive blast cabinet, which I plan to use on 
> >> stripping Edison bedplates for re-painting. Can someone who has used this 
> >> method of stripping give me some tips? What sort of abrasive is best to 
> >> use on bedplates? On American Restoration they started using walnut 
> >> shells, or some such abrasive, but on very thin, fragile metal pieces. I 
> >> think I can go a little stronger on bedplates! Glass beads are what are 
> >> sold with it, I believe. Any help or advice is appreciated. My first job 
> >> is on an Edison Standard F bedplate and carriage. The bedplate has flakes 
> >> of paint off, and some rust areas. I was just going to use a great 
> >> Standard D bedplate I have, but then saw that the serial number was 
> >> stamped on the bottom of the F bedplate and matched the number on the tag. 
> >> So, I said I can't separate! So, here goes a complete restoration!
> >>
> >> Mike Sorter
> >> _______________________________________________
> >> Phono-L mailing list
> >> http://phono-l.org
> > 
> > _______________________________________________
> > Phono-L mailing list
> > http://phono-l.org
> >
> >
> _______________________________________________
> Phono-L mailing list
> http://phono-l.org
                                          
_______________________________________________
Phono-L mailing list
http://phono-l.org

Reply via email to