Hello Randy, When I bought my 18 it was also missing the top back, I found one eventually. For many years I used a XIV back of the same vintage and it fit fine although without the fancy veneer and moldings. I returned the back to the 14 before it went to the new owner otherwise I would have been glad to send it to you.
Mark . Sent from my iPad On Oct 18, 2012, at 8:52 PM, "Bill Feiner" <[email protected]> wrote: > Hi Randy; The opening in the rear of the cabinet is 18" wide and 11 5/8" > high. The correct > board has the trim on it that matches the rest of the cabinet, but I would be > interested in > a plain back board until I can find the correct back. > Thanks, Bill > -----Original Message----- From: Randy Larson > Sent: Thursday, October 18, 2012 3:05 PM > To: Antique Phonograph List > Subject: Re: [Phono-L] Phono-L ad > > I have one but not sure what model it's from, it's also mahogany, if you > send the dimensions, I'll check it. > On Oct 18, 2012 10:41 AM, "Bill Feiner" <[email protected]> wrote: > >> Hi; I wanted to post this on Phono-L, this is the first time that I have >> ever posted. I hope that this is the correct procedure. >> Victrola XVIII Rear Motor Access Door Needed- I have acquired a Victrola >> XVIII that is missing the rear door behind the >> motor. I also need the needle holder. This part can also come from a >> Victrola XVII, as they are both the same. The rear >> door however is unique to the XVIII because of the moulding on the door. >> The dimensions of the opening is 18” wide >> and 11 5/8'” high. Any help would be greatly appreciated. Bill Feiner >> _______________________________________________ >> Phono-L mailing list >> http://phono-l.org > _______________________________________________ > Phono-L mailing list > http://phono-l.org > _______________________________________________ > Phono-L mailing list > http://phono-l.org _______________________________________________ Phono-L mailing list http://phono-l.org
