And that would have been applied to metal finished parts?

Ron L

-----Original Message-----
From: Phono-L [] On Behalf Of Rich via
Sent: Saturday, January 12, 2019 6:39 PM
Cc: Rich
Subject: Re: [Phono-L] Credenza X and VE8-12X coming along!

I previously answered your finish question in an earlier post.

The closest thing to what was used OEM is Behlen Violin Varnish, can be 
difficult to find but it works well. The base coats were plain shellac 
followed by a top coat of the Violin Varnish.

The term VARNISH does not describe a specific product or finishing 
technique. It is used as a generic term to describe a finishing material 
that contains some type of oil. In many cases it will be a non-drying 
type of finish that has a elastic like consistency.


On 1/11/19 3:39 PM, Robert Wright via Phono-L wrote:
> Thanks (again) Ron! I ended up using dish soap and a toothbrush to get 
> most of it removed, but I'll try the WD-40 method. My main concern was 
> that the arms that move with the tonearm didn't move easily at all, but 
> I think the hot water I was using melted away a good bit of the gunk 
> that was making it so stiff. After a thorough drying, I oiled all the 
> moving parts with 3-in-one, then rubbed an oily paper towel over all of 
> it to guard against any kind of moisture left over.
> Anyone know about the factory varnish situation? I know it's probably a 
> bit involved, but what am I (considering) getting into, exactly?
> Thanks,
> Robert
> On Jan 11, 2019, at 9:11 AM, Ron L'Herault via Phono-L 
> < <>> wrote:
>> You only need to remove old oil from the joints and hand crud from the 
>> finish.   I’d use (have used) WD040 and a toothbrush to clean the 
>> mechanism and spray cleaner like Fantastic to clean the gold.  Do not 
>> use polish.  Relubricate moving parts with light oil.  Put oil on the 
>> pad to avoid squeal.
>> Ron
> _______________________________________________
> Phono-L mailing list
> Unsubscribe:
Phono-L mailing list

Phono-L mailing list

Reply via email to