ID:               46444
 Comment by:       crrodriguez at opensuse dot org
 Reported By:      hostmaster at uuism dot net
 Status:           Open
 Bug Type:         Session related
 Operating System: Fedora Core 4
 PHP Version:      5.2CVS-2008-11-02
 New Comment:

Same here

Program received signal SIGSEGV, Segmentation fault.
0x00007ffff5d56560 in strlen () from /lib64/libc.so.6
(gdb) bt full
#0  0x00007ffff5d56560 in strlen () from /lib64/libc.so.6
No symbol table info available.
#1  0x00000000005a06d8 in ps_open_files (mod_data=0xddd960,
save_path=0x7b <Address 0x7b out of bounds>, session_name=0xaaa37a
"PHPSESSID")
    at /home/cristian/php5/ext/session/mod_files.c:325
        data = (ps_files *) 0xfdfaf0
        p = 0xdeff7a ";213"
        last = 0xdeff74 ",23123;213"
        argv = {0xdeff50
"123;:/really\\completely:::/invalid;;,23123;213", 0xdeff54
":/really\\completely:::/invalid;;,23123;213",
  0xdeff73 ";,23123;213"}
        argc = 4
        dirdepth = 123
        filemode = 0
#2  0x0000000000599118 in php_session_initialize () at
/home/cristian/php5/ext/session/session.c:512
        val = 0xfde576 "L)\r&#65533;\r&#65533;\r&#65533;"
        vallen = 0
#3  0x000000000059d732 in php_session_start () at
/home/cristian/php5/ext/session/session.c:1479
        ppid = (zval **) 0xfdc678
        data = (zval **) 0x78
        p = 0x887fd0 "H\211l$&#65533;L\211|$&#65533;H\215-&#65533;}M"
        value = 0x0
        nrand = 32767
        lensess = 9
#4  0x000000000059ed3d in zif_session_start (ht=0,
return_value=0xfdc6c8, return_value_ptr=0x0, this_ptr=0x0,
return_value_used=0)
    at /home/cristian/php5/ext/session/session.c:1886
No locals.
#5  0x0000000000818899 in zend_do_fcall_common_helper_SPEC
(execute_data=0x7ffff7e6f090) at
/home/cristian/php5/Zend/zend_vm_execute.h:313
        opline = (zend_op *) 0xfddff0
        should_change_scope = 0 '\0'
#6  0x000000000081df90 in ZEND_DO_FCALL_SPEC_CONST_HANDLER
(execute_data=0x7ffff7e6f090) at
/home/cristian/php5/Zend/zend_vm_execute.h:1564
        opline = (zend_op *) 0xfddff0
        fname = (zval *) 0xfde020
#7  0x0000000000817987 in execute (op_array=0xfdd418) at
/home/cristian/php5/Zend/zend_vm_execute.h:104
        ret = 0
        execute_data = (zend_execute_data *) 0x7ffff7e6f090
        nested = 1 '\001'
        original_in_execution = 0 '\0'
#8  0x00000000007e77e9 in zend_execute_scripts (type=8, retval=0x0,
file_count=3) at /home/cristian/php5/Zend/zend.c:1181
        files = {{gp_offset = 40, fp_offset = 48, overflow_arg_area =
0x7fffffffb7e0, reg_save_area = 0x7fffffffb720}}
        i = 1
        file_handle = (zend_file_handle *) 0x7fffffffdc60
        orig_op_array = (zend_op_array *) 0x0
        orig_retval_ptr_ptr = (zval **) 0x0
#9  0x000000000076a1d9 in php_execute_script
(primary_file=0x7fffffffdc60) at /home/cristian/php5/main/main.c:2101
        realfile =
"/home/cristian/php5/ext/session/tests/016.phpt\000\000&#65533;&#65533;&#65533;&#65533;&#65533;\177\000\000&#65533;\n|\000\000\000\000\000&#65533;r&#65533;&#65533;&#65533;\177\000\000p~&#65533;",
'\0' <repeats 13 times>,
"uct\000&#65533;\a\000\000X\000\000\000\000\000&#65533;p&#65533;&#65533;&#65533;\177\000\000\020&#65533;&#65533;&#65533;&#65533;\177\000\000z\005\177\000\000\000\000\000\002\000\000\000&#65533;\177\000\000X\000\000\000\000\000V\a\000\000\000\000\000\000\202\005\000\000\000\000\000\000&#65533;mQ&#65533;&#65533;\177\000\000\210&#65533;&#65533;\000\000\000\00---Type
<return> to continue, or q <return> to quit---
0\000P&#65533;&#65533;&#65533;&#65533;\177\000\000\030&#65533;&#65533;&#65533;&#65533;\177\000\000&#65533;\214\222D\000\000\000\000\000&#65533;&#65533;"...
        __orig_bailout = (jmp_buf *) 0x7fffffffdaf0
        __bailout = {{__jmpbuf = {8945616, 1504162217199220120,
4369584, 140737488346800, 0, 0, 1504162220334462360,
      -1504162127358118504}, __mask_was_saved = 0, __saved_mask =
{__val = {140737353931176, 0, 4294967295, 47784, 14397440, 4369584,
        140737488346800, 0, 0, 0, 140737351963577, 1, 0, 0,
73014444032, 140737317299080}}}}
        prepend_file_p = (zend_file_handle *) 0x0
        append_file_p = (zend_file_handle *) 0x0
        prepend_file = {type = ZEND_HANDLE_FILENAME, filename = 0x0,
opened_path = 0x0, handle = {fd = 0, fp = 0x0, stream = {
      handle = 0x0, isatty = 0, mmap = {len = 0, pos = 0, map = 0x0,
buf = 0x0, old_handle = 0x0, old_closer = 0}, reader = 0, fsizer = 0,
      closer = 0}}, free_filename = 0 '\0'}
        append_file = {type = ZEND_HANDLE_FILENAME, filename = 0x0,
opened_path = 0x0, handle = {fd = 0, fp = 0x0, stream = {handle = 0x0,
      isatty = 0, mmap = {len = 0, pos = 0, map = 0x0, buf = 0x0,
old_handle = 0x0, old_closer = 0}, reader = 0, fsizer = 0, closer =
0}},
  free_filename = 0 '\0'}
        old_cwd = 0x7fffffffb800 ""
        use_heap = 0 '\0'
        retval = 0
#10 0x0000000000887449 in main (argc=5, argv=0x7fffffffdeb8) at
/home/cristian/php5/sapi/cli/php_cli.c:1138
        __orig_bailout = (jmp_buf *) 0x0
        __bailout = {{__jmpbuf = {8945616, 1504162217448781208,
4369584, 140737488346800, 0, 0, 1504162217209705880,
      -1504161051082934888}, __mask_was_saved = 0, __saved_mask =
{__val = {140737353925464, 140737488346240, 140737488346184,
2972705047,
        140737488346400, 61765110, 140737354121608, 0, 140737351945772,
140733193388033, 140737354118584, 0, 1, 1910330751,
        140737351946810, 8419355904}}}}
        exit_status = 0
        c = -1
        file_handle = {type = ZEND_HANDLE_MAPPED, filename =
0x7fffffffe302 "/home/cristian/php5/ext/session/tests/016.phpt",
  opened_path = 0x0, handle = {fd = 16635992, fp = 0xfdd858, stream =
{handle = 0xfdd858, isatty = 0, mmap = {len = 495, pos = 0,
        map = 0x7ffff7ff7000, buf = 0x7ffff7ff7000 <Address
0x7ffff7ff7000 out of bounds>, old_handle = 0xff34c0,
        old_closer = 0x8029a0 <zend_stream_stdio_closer>}, reader =
0x802974 <zend_stream_stdio_reader>,
      fsizer = 0x8029d1 <zend_stream_stdio_fsizer>, closer = 0x802aea
<zend_stream_mmap_closer>}}, free_filename = 0 '\0'}
        behavior = 1
        reflection_what = 0x0
        orig_optind = 1
        orig_optarg = 0x0
        arg_free = 0x7fffffffe302
"/home/cristian/php5/ext/session/tests/016.phpt"
        arg_excp = (char **) 0x7fffffffded8
        script_file = 0x7fffffffe302
"/home/cristian/php5/ext/session/tests/016.phpt"
        interactive = 0
        module_started = 1
        request_started = 1
        lineno = 1
        exec_direct = 0x0
        exec_run = 0x0
        exec_begin = 0x0
        exec_end = 0x0
        param_error = 0x0
        hide_argv = 0
---Type <return> to continue, or q <return> to quit---
        ini_entries_len = 110


Previous Comments:
------------------------------------------------------------------------

[2008-11-17 16:45:29] hostmaster at uuism dot net

I run these commands:

#rm config.cache
#./configure --disable-all --disable-cgi --enable-session
--disable-debug --with-pcre-regex --with-pic
#make clean
#make test TESTS=ext/session/tests/016.phpt

[snip]

=====================================================================
PHP         : /usr/local/src/php5.2-200811022130/sapi/cli/php
PHP_SAPI    : cli
PHP_VERSION : 5.2.7RC3-dev
ZEND_VERSION: 2.2.0
PHP_OS      : Linux - Linux host.uuserver.net 2.6.20.1 #16 SMP Thu Nov
8 14:19:44 EST 2007 i686
INI actual  : /usr/local/src/php5.2-200811022130/tmp-php.ini
More .INIs  :
CWD         : /usr/local/src/php5.2-200811022130
Extra dirs  :
VALGRIND    : Not used
=====================================================================
Running selected tests.
FAIL invalid session.save_path should not cause a segfault
[ext/session/tests/016.phpt]
=====================================================================
Number of tests :    1                 1
Tests skipped   :    0 (  0.0%) --------
Tests warned    :    0 (  0.0%) (  0.0%)
Tests failed    :    1 (100.0%) (100.0%)
Expected fail   :    0 (  0.0%) (  0.0%)
Tests passed    :    0 (  0.0%) (  0.0%)
---------------------------------------------------------------------
Time taken      :    0 seconds
=====================================================================

=====================================================================
FAILED TEST SUMMARY
---------------------------------------------------------------------
invalid session.save_path should not cause a segfault
[ext/session/tests/016.phpt]
=====================================================================

------------------------------------------------------------------------

[2008-11-17 14:48:07] hostmaster at uuism dot net

I get the same error message as when I tried to configure php without
pcre before:

+-----------------------------------------------------------+
|                       ! ERROR !                           |
| The test-suite requires that you have pcre extension      |
| enabled. To enable this extension either compile your PHP |
| with --with-pcre-regex or if you've compiled pcre as a    |
| shared module load it via php.ini.                        |
+-----------------------------------------------------------+

------------------------------------------------------------------------

[2008-11-11 18:49:02] j...@php.net

Try this:

# rm config.cache
# ./configure --disable-all --disable-cgi --enable-session --disable-
debug --with-pic
# make test TESTS=ext/session/tests/016.phpt



------------------------------------------------------------------------

[2008-11-09 00:12:51] hostmaster at uuism dot net

jani,

It appears to be related to the -with-pic option.

Here are the results:

Case 1:  PASS ext/session/tests/016.phpt (ran twice)

./configure --disable-all --disable-cgi --enable-session
--with-pcre-regex --build=i386-redhat-linux --host=i386-redhat-linux
--target=i386-redhat-linux-gnu --program-prefix= --prefix=/usr
--exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin
--sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include
--libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var
--sharedstatedir=/usr/com --mandir=/usr/share/man
--infodir=/usr/share/info --cache-file=../config.cache --with-libdir=lib
--with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d
--disable-debug

Case 2:  FAIL ext/session/tests/016.phpt

./configure --disable-all --disable-cgi --enable-session
--with-pcre-regex --build=i386-redhat-linux --host=i386-redhat-linux
--target=i386-redhat-linux-gnu --program-prefix= --prefix=/usr
--exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin
--sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include
--libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var
--sharedstatedir=/usr/com --mandir=/usr/share/man
--infodir=/usr/share/info --cache-file=../config.cache --with-libdir=lib
--with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d
--disable-debug --with-pic

Jim

------------------------------------------------------------------------

[2008-11-08 19:20:30] j...@php.net

Now you add options one by one to see which one causes the problem.

------------------------------------------------------------------------

The remainder of the comments for this report are too long. To view
the rest of the comments, please view the bug report online at
    http://bugs.php.net/46444

-- 
Edit this bug report at http://bugs.php.net/?id=46444&edit=1

Reply via email to