ID: 26103 Updated by: [EMAIL PROTECTED] Reported By: freebsd at argentproductions dot com -Status: Open +Status: Closed Bug Type: Compile Failure Operating System: FreeBSD 5.1-RELEASE PHP Version: 4.3.3 New Comment:
Unfortunately 4.3.4 was released already. This fix will be in PHP 4.3.5. Previous Comments: ------------------------------------------------------------------------ [2003-11-04 02:34:46] freebsd at argentproductions dot com Actually, I didn't delete the config.cache, but I did a "make clean" in between each time AND I tried it on three different completely clean source trees. So I'm certain that had nothing to do with it. :) Now, having just downloaded the file you specified, I can happily say -- your patch worked. :-D Looks like its all good now. Just to be fair, I ran it twice, with a make clean in between, just like the other source tars, and reordered a few of the options to make sure. Compiled perfectly both times. Don't know if the actual module is any different, but it *did* compile just fine. Unless this spontaneously pops up again when I go to compile and install the FreeBSD port for 4.3.4 (whenever it comes out), I'm happy. Will your patch make it into the actual 4.3.4 distribution file? Peace... ------------------------------------------------------------------------ [2003-11-04 00:16:04] [EMAIL PROTECTED] Please try using this CVS snapshot: http://snaps.php.net/php4-STABLE-latest.tar.gz For Windows: http://snaps.php.net/win32/php4-win32-STABLE-latest.zip I just committed possible fix for this, so please try the snapshot in about 2 hours after you got this mail. ------------------------------------------------------------------------ [2003-11-03 23:53:17] [EMAIL PROTECTED] So it compiles with all the other options, as long as you don't enable mime-magic ? (I hope you remembered to delete config.cache when you tried different options. :) ------------------------------------------------------------------------ [2003-11-03 21:27:24] freebsd at argentproductions dot com Okay I've narrowed it down to this configure option: --with-mime-magic=/usr/share/misc/magic.mime If that's in the list it causes --with-mssql to die a horrible death. This file is rather large. I can post it if you want but its the standard distro magic.mime file that came with my system AFAICT. Its just interesting that it would cause --with-mssql to crash. Anything I can do to help figure out this problem? I'm not personally addicted to MIME magic, but I was looking forward to playing with it. I NEED the other options. Is this still bogus? Peace... ------------------------------------------------------------------------ [2003-11-03 19:41:44] freebsd at argentproductions dot com Description: ------------ After an extensive search that came up with nothing quite like this scenario, I figured I'd post this since its eating up all my time and I have to get this up ASAP. Any and all comments / suggestions are very welcome! When building mod_php4 from the FreeBSD port (using PHP 4.3.3 release) I get a compile error (listed in "Actual Result" section). So far I've had no other trouble with this system, and a previous compilation of 4.3.3 with mssql at one point did succeed, but since then I am not sure what has changed as its been almost two months now since I last compiled mod_php4. I have tried a number of things to fix this problem, but since I'm using the port management system, changing the actual PHP distribution code is all but impossible. I need the port management system for version tracking. An attempt to use 4.3.4RC1 failed with the same exact error. There is not yet a port for 4.3.4RC3. Environment is as follows: FreeBSD 5.1-RELEASE with latest security patches. FreeTDS 0.61.2 installed with --prefix=/usr/local --with-tdsver=7.0 --enable-msdblib Configure Options (note: I'm typing this by hand from the Makefile for the port, so forgive any misspellings I might accidentally do...) --enable-versioning --enable-memory-limit --with-layout=GNU --with-zlib-dir=/usr --disable-all -- with-pfpro=/usr/local --with-regex=php --enable-bcmath --enable-calendar --with-bz2=/usr --with-curl=/usr/local --with-dom=/usr/local --with-dom-xslt=/usr/local --with-dom-exslt=/usr/local --enable-ftp --with-gd --enable-gd-native-ttf --enable-gd-jis-conv --with-freetype-dir=/usr/local --with-jpeg-dir=/usr/local --with-png-dir=/usr/local --with-gettext=/usr/local --with-iconv=/usr/local --with-imap=/usr/local --with-imap-ssl=/usr/local --enable-mbstring --enable-mbregex --with-mcal=/usr/local --with-mcrypt=/usr/local --with-mhash=/usr/local --with-mime-magic=/usr/share/misc/magic.mime --with-mysql=/usr/local --with-openssl=/usr --enable-overload --with-pcre-regex=yes --enable-posix --enable-session --with-mssql=/usr/local --enable-tokenizer --enable-xml --with-expat-dir=/usr/local --with-zlib=yes Expected result: ---------------- I expected a clean compile as it has done before (actually, it did it once before using an RC of 4.3.3 (It might have been the release, even). I am not sure why a recompile all of a sudden causes problems. Actual result: -------------- /bin/sh /usr/ports/www/mod_php4/work/php-4.3.3/libtool --silent --preserve-dup-deps --mode=compile cc -Imain/ -I/usr/ports/www/mod_php4/work/php-4.3.3/main/ -DPHP_ATOM_INC -I/usr/ports/www/mod_php4/work/php-4.3.3/include -I/usr/ports/www/mod_php4/work/php-4.3.3/main -I/usr/ports/www/mod_php4/work/php-4.3.3 -I/usr/ports/www/mod_php4/work/php-4.3.3/Zend -I/usr/local/include -I/usr/local/include/libxml2 -I/usr/local/include/freetype2 -I/usr/local/include/c-client -I/usr/local/include/mcal -I/usr/local/include/mysql -I/usr/ports/www/mod_php4/work/php-4.3.3/TSRM -O -pipe -march=pentium3 -prefer-pic -c main/internal_functions.c -o main/internal_functions.lo In file included from /usr/local/include/sybfront.h:23, from /usr/local/include/sqlfront.h:23, from /usr/ports/www/mod_php4/work/php-4.3.3/ext/mssql/php_mssql.h:36, from main/internal_functions.c:55: /usr/local/include/sybdb.h:103: syntax error before numeric constant /usr/local/include/sybdb.h:150: syntax error before numeric constant /usr/local/include/sybdb.h:177: syntax error before numeric constant /usr/local/include/sybdb.h:204: syntax error before numeric constant /usr/local/include/sybdb.h:210: syntax error before numeric constant /usr/local/include/sybdb.h:281: syntax error before numeric constant /usr/local/include/sybdb.h:285: syntax error before numeric constant /usr/local/include/sybdb.h:339: syntax error before numeric constant /usr/local/include/sybdb.h:453: syntax error before numeric constant In file included from /usr/local/include/sybfront.h:23, from /usr/local/include/sqlfront.h:23, from /usr/ports/www/mod_php4/work/php-4.3.3/ext/mssql/php_mssql.h:36, from main/internal_functions.c:55: /usr/local/include/sybdb.h:20:1: unterminated #ifndef In file included from /usr/local/include/sqlfront.h:23, from /usr/ports/www/mod_php4/work/php-4.3.3/ext/mssql/php_mssql.h:36, from main/internal_functions.c:55: /usr/local/include/sybfront.h:20:1: unterminated #ifndef In file included from /usr/ports/www/mod_php4/work/php-4.3.3/ext/mssql/php_mssql.h:36, from main/internal_functions.c:55: /usr/local/include/sqlfront.h:20:1: unterminated #ifndef In file included from main/internal_functions.c:55: /usr/ports/www/mod_php4/work/php-4.3.3/ext/mssql/php_mssql.h:26:1: unterminated #if /usr/ports/www/mod_php4/work/php-4.3.3/ext/mssql/php_mssql.h:22:1: unterminated #ifndef *** Error code 1 Stop in /usr/ports/www/mod_php4/work/php-4.3.3. *** Error code 1 Stop in /usr/ports/www/mod_php4. *** Error code 1 Stop in /usr/ports/www/mod_php4. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade27655.0 make ** Fix the problem and try again. ** The following packages were not installed or upgraded (*:skipped / !:failed) ! www/mod_php4 (mod_php4-4.3.3,1) (bad C++ code) ------------------------------------------------------------------------ -- Edit this bug report at http://bugs.php.net/?id=26103&edit=1
