Alex, Your setup will not work like you think. To do what you want you are going to need 2 hubs unless you are doing some sort of NAT on the server. I have this exact same setup and have set up many like it. If you write me directly I can help you out on this, there are a few questions I have to ask that you don't want the answers broadcast over a newsgroup. Jim -------Original Message------- From: Alex Francis Date: Monday, December 09, 2002 12:46:03 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems Adam, You are correct. I had two NICs, set up exactly as you describe, but kept getting problems (I would lose my internet connection and have to reboot to get it back. I think I will try againand if that fails, buy a cable modem router. "Adam Williams" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > No I think he has his WS with a real IP from his ISP and then his web > server plugged into the same hub as his WS but with 192.168.1.1. He'll > either need to get a 2nd NIC and give it an ip like 192.168.1.2 or get a > cable modem router. Or change his WS to linux and add eth0:0 with > 192.168.1.2 :) > > Adam > > On Mon, 9 Dec 2002, Gene Dymarskiy wrote: > > > > > > > > > > > I am a bit confused. > > > > Your WS is connected to cable modem and gets public IP assigned by your ISP. Your WS is also connected to a hub shared with your web server. > > > > does it mean you have two network cards, one connected to cable modem, and the other to the hub? > > > > > > > > > > > > -----Original Message----- > > From: Alex Francis [mailto:[EMAIL PROTECTED]] > > Sent: Monday, December 09, 2002 2:20 PM > > To: Gene Dymarskiy > > Subject: RE: [PHP-DB] More Apache Installation problems > > > > > > I need to have a server assigned IP address on my workstation for my cable > > modem. > > > > -----Original Message----- > > From: Gene Dymarskiy [mailto:[EMAIL PROTECTED]] > > Sent: Monday, December 09, 2002 8:06 PM > > To: Alex Francis; [EMAIL PROTECTED] > > Subject: RE: [PHP-DB] More Apache Installation problems > > > > > > I'd check IP address of your workstation. make sure both the WS and the > > server are on the same subnet. Your WS should have 192.168.... address, too. > > > > good luck > > > > -----Original Message----- > > From: Alex Francis [mailto:[EMAIL PROTECTED]] > > Sent: Monday, December 09, 2002 2:00 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [PHP-DB] More Apache Installation problems > > > > > > It seems like a network problem. I can access the network through windows > > network neighborhood but can't ping it, any suggestions? > > > > "Gene Dymarskiy" <[EMAIL PROTECTED]> wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > make sure both your server and workstation can see each other. > > > > try pinging the server: > > > > ping 192.168.1.1 > > > > > > > > -----Original Message----- > > From: Alex Francis [mailto:[EMAIL PROTECTED]] > > Sent: Monday, December 09, 2002 1:39 PM > > To: [EMAIL PROTECTED] > > Subject: [PHP-DB] More Apache Installation problems > > > > > > At last I have Apache and PHP running on my server. > > My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my > > httpd.conf file. > > > > I can access my test files from the server using either http://localhost or > > http://192.168.1.1, however if I try the same on my main workstation I can't > > find the server. Is there something else I need to do. > > > > > > > > -- > > PHP Database Mailing List (http://www.php.net/) > > To unsubscribe, visit: http://www.php.net/unsub.php > > > > > > > > > > -- > > PHP Database Mailing List (http://www.php.net/) > > To unsubscribe, visit: http://www.php.net/unsub.php > > > > > > > > > > > > -- > > PHP Database Mailing List (http://www.php.net/) > > To unsubscribe, visit: http://www.php.net/unsub.php > > > -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php .
Advertising
-- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
