ID: 12243
User updated by: [EMAIL PROTECTED]
Status: Feedback
Bug Type: Variables related
Operating System: FreeBSD 4.1.1-STABLE
PHP Version: 4.0.6
New Comment:

Absolutely. I've written just one test script with just those 2 lines in it.  I copied 
this same file to 3 servers now - the 2 that I've already mentioned plus another 
FreeBSD server (identical in hardware and OS config to the other) running 4.03PL1.  
The only one of these servers that prints out 2147483647 is the FreeBSD server running 
4.06 (also did it with 4.05).  The other 2 servers print out 5000000000.  I also 
remember another location in my site that was affected by this bug, and I can 
GUARANTEE that it did not occur on the affected server until I updated it to 4.05. 
Please change the status of this bug report back to open.

Previous Comments:

[2001-07-19 00:15:34] [EMAIL PROTECTED]

are you sure you don't initialize the variable with 5 Million on the Linux box?


[2001-07-19 00:03:32] [EMAIL PROTECTED]

If this is strictly hardware related, then how come when I run the exact same 2 lines 
on another box running linux, I get the correct 5 billion number displayed?  The linux 
box is using an AMD 450 Mhz K6, and the FreeBSD box is using a Pentium 3-600.  I am 
not able to back up to 4.03PL1 on the FreeBSD box, but I am quite sure that this 
problem did not occur back when it was loaded.


[2001-07-18 23:52:41] [EMAIL PROTECTED]

1) longlong != double
2) the scale is HW-dependant, i. e. you need a 64-bit HW to get native support for 
64-bit numbers. that's how it's always been in PHP. there was no change WIRT this.

5,000,000,000 is clearly more than your HW can take, so it's clipped to the closest 
possible value.


[2001-07-18 23:34:07] [EMAIL PROTECTED]

I've verified that this behavior is relatively new. It does not happen in 4.03PL1, but 
does in 4.05 and 4.06.


[2001-07-18 23:13:02] [EMAIL PROTECTED]

$testnumber = 5000000000;
echo $testnumber;

The result is 2147483647.  The variable is of type integer, even though it was 
initialized with a double value.  I first noticed this with PHP 4.05 and it still 
occurs with 4.05.  I do not believe it behaved this way back when I had 4.03PL1 

My configure line is:
 './configure' '--with-gd=no' '--with-mysql=/usr/local' 
'--with-config-file-path=/usr/home/priraise/phpini' '--enable-debug=no' 
'--enable-track-vars=yes' '--enable-ftp=yes' '--enable-force-cgi-redirect=yes' 
'--with-openssl' '--enable-trans-sid' '--enable-xml'


Edit this bug report at

PHP Development Mailing List <>
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
To contact the list administrators, e-mail: [EMAIL PROTECTED]

Reply via email to