for really thin cameras, corrugated cardboard works well. It also allows you to have several different sizes blocked out since the paper/negatives will go over the other dividers. andy schmitt
-----Original Message----- From: pinhole-discussion-admin@p at ??????? [mailto:pinhole-discussion-admin@p at ???????]On Behalf Of Scott Sellers Sent: Wednesday, May 09, 2001 8:19 PM To: pinhole-discussion@p at ??????? Subject: Re: [pinhole-discussion] Film/Paper holder. Hello Stephen, On Wednesday, May 09, 2001, Stephen Gray wrote: > Hello All. > I am constructing a pin hole camera in which I am going to use photographic > paper. I thought I would construct a paper holder out of magnetic strip but > don't seem to be able to get hold of it anywhere. Does anyone know of > anywhere here in the UK that might sell it ? I would be grateful for any > other paper holder ideas too. For curved filmplane, small glued blocks of wood can hold the "sprung" negative in place. Leave a little slack, or it might be difficult to get the negative back out. For flat filmplane, the box-in-box design Lisa described works well with cardboard or foamcore. If the boxes fit well, the overlap forms a good light trap. -- Scott Sellers mailto:scottsell...@mindspring.com _______________________________________________ Pinhole-Discussion mailing list Pinhole-Discussion@p at ??????? unsubscribe or change your account at http://www.p at ???????/discussion/
