Luca Capello <[email protected]> writes:
> # MTD device name Device offset Env. size Flash sector size
> Number of sectors
> /dev/mtd2 0x0000 00040000 00020000
> 2
Aha, with this change it looks good:
$ sudo fw_printenv
boot_menu_timeout=300
bootargs_base=rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200
console=tty0 loglevel=8 regular_boot
bootcmd=setenv bootargs ${bootargs_base} ${mtdparts} rootfstype=ext2
root=/dev/mmcblk0p2 rootdelay=5 panic=10 mem=127M persistent_log=127M; mmcinit;
ext2load mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000
bootdelay=1
menu_1=Boot from Flash: setenv bootargs ${bootargs_base} ${mtdparts}; nand
read.e 0x32000000 kernel 0x200000; bootm 0x32000000
menu_2=Reboot: reset
menu_3=Power off: neo1973 power-off
menu_4=Set console to USB: setenv stdin usbtty; setenv stdout usbtty; setenv
stderr usbtty
menu_5=Set console to serial: setenv stdin serial; setenv stdout serial; setenv
stderr serial
menu_6=SD/uImage2.bin: setenv bootargs ${bootargs_base} ${mtdparts}
rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 panic=10; mmcinit; ext2load mmc
1 0x32000000 uImage2.bin; bootm 0x32000000
menu_7=SD/uImage3.bin: setenv bootargs ${bootargs_base} ${mtdparts}
rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 panic=10; mmcinit; ext2load mmc
1 0x32000000 uImage3.bin; bootm 0x32000000
mtddevname=nor
mtddevnum=0
mtdids=nor0=physmap-flash,nand0=neo1973-nand
mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
partition=nor0,0
pcb_rev=0x000
pcf50633_int1=0x80
pcf50633_int2=0xfe
quiet=1
sd_image_name=uImage.bin
splashimage=nand read.e 0x32000000 splash 0x5000; unzip 0x32000000 0x8800000
0x96000
stderr=usbtty
stdin=usbtty
stdout=usbtty
usbtty=cdc_acm
li...@ginger:~$ sudo fw_setenv bootcmd 'setenv bootargs ${bootargs_base}
${mtdparts} rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 panic=10 mem=127M;
mmcinit; ext2load mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000'
li...@ginger:~$ sudo fw_printenv
boot_menu_timeout=300
bootargs_base=rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200
console=tty0 loglevel=8 regular_boot
bootdelay=1
menu_1=Boot from Flash: setenv bootargs ${bootargs_base} ${mtdparts}; nand
read.e 0x32000000 kernel 0x200000; bootm 0x32000000
menu_2=Reboot: reset
menu_3=Power off: neo1973 power-off
menu_4=Set console to USB: setenv stdin usbtty; setenv stdout usbtty; setenv
stderr usbtty
menu_5=Set console to serial: setenv stdin serial; setenv stdout serial; setenv
stderr serial
menu_6=SD/uImage2.bin: setenv bootargs ${bootargs_base} ${mtdparts}
rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 panic=10; mmcinit; ext2load mmc
1 0x32000000 uImage2.bin; bootm 0x32000000
menu_7=SD/uImage3.bin: setenv bootargs ${bootargs_base} ${mtdparts}
rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 panic=10; mmcinit; ext2load mmc
1 0x32000000 uImage3.bin; bootm 0x32000000
mtddevname=nor
mtddevnum=0
mtdids=nor0=physmap-flash,nand0=neo1973-nand
mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
partition=nor0,0
pcb_rev=0x000
pcf50633_int1=0x80
pcf50633_int2=0xfe
quiet=1
sd_image_name=uImage.bin
splashimage=nand read.e 0x32000000 splash 0x5000; unzip 0x32000000 0x8800000
0x96000
stderr=usbtty
stdin=usbtty
stdout=usbtty
usbtty=cdc_acm
bootcmd=setenv bootargs ${bootargs_base} ${mtdparts} rootfstype=ext2
root=/dev/mmcblk0p2 rootdelay=5 panic=10 mem=127M; mmcinit; ext2load mmc 1
0x32000000 ${sd_image_name}; bootm 0x32000000
I did a test reboot and the system seemed to boot up nicely with updated kernel
boot parameters:
$ cat /proc/cmdline
rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0
loglevel=8 regular_boot
mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 panic=10 mem=127M
Thanks a lot for packaking the fixed version!
_______________________________________________
pkg-fso-maint mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/pkg-fso-maint
