On Tue, 16 Mar 2010 19:39:46 +0100, arne anka wrote: > i upgraded about an hour ago, and after a reboot, usb networking was gone.
Ha! Same here. Good that I'm reading mail while my FR does a fsck :) A bit more info: * The network comes up on both sides. * It just dies rather quickly. From the syslog on my desktop machine: Mar 16 20:03:18 belanna kernel: usb 5-1: new full speed USB device using uhci_hcd and address 13 Mar 16 20:03:19 belanna kernel: usb 5-1: New USB device found, idVendor=1457, idProduct=5122 Mar 16 20:03:19 belanna kernel: usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Mar 16 20:03:19 belanna kernel: usb 5-1: Product: RNDIS/Ethernet Gadget Mar 16 20:03:19 belanna kernel: usb 5-1: Manufacturer: Linux 2.6.29-rc3 with s3c2410_udc Mar 16 20:03:19 belanna kernel: usb0: register 'cdc_ether' at usb-0000:00:1d.3-1, CDC Ethernet Device, f6:a4:32:0b:f5:f2 Mar 16 20:03:31 belanna kernel: usb0: no IPv6 routers present Mar 16 20:03:27 deanna kernel: imklog 4.6.1, log source = /proc/kmsg started. Mar 16 20:03:27 deanna rsyslogd: [origin software="rsyslogd" swVersion="4.6.1" x-pid="1157" x-info="http://www.rsyslog.com";] (re)start [..] Mar 16 20:03:27 deanna kernel: [21474739.920000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Mar 16 20:03:27 deanna kernel: [21474739.935000] s3c-ohci s3c-ohci: S3C24XX OHCI Mar 16 20:03:27 deanna kernel: [21474739.995000] s3c-ohci s3c-ohci: new USB bus registered, assigned bus number 1 Mar 16 20:03:27 deanna kernel: [21474740.005000] s3c-ohci s3c-ohci: irq 42, io mem 0x49000000 Mar 16 20:03:27 deanna kernel: [21474740.080000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 Mar 16 20:03:27 deanna kernel: [21474740.095000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 16 20:03:27 deanna kernel: [21474740.110000] usb usb1: Product: S3C24XX OHCI Mar 16 20:03:27 deanna kernel: [21474740.120000] usb usb1: Manufacturer: Linux 2.6.29-rc3 ohci_hcd Mar 16 20:03:27 deanna kernel: [21474740.135000] usb usb1: SerialNumber: s3c24xx Mar 16 20:03:27 deanna kernel: [21474740.295000] usb usb1: configuration #1 chosen from 1 choice Mar 16 20:03:27 deanna kernel: [21474740.365000] hub 1-0:1.0: USB hub found Mar 16 20:03:27 deanna kernel: [21474740.370000] hub 1-0:1.0: 2 ports detected Mar 16 20:03:27 deanna kernel: [21474740.920000] usb 1-1: new full speed USB device using s3c-ohci and address 2 Mar 16 20:03:27 deanna kernel: [21474741.185000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 Mar 16 20:03:27 deanna kernel: [21474741.190000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Mar 16 20:03:27 deanna kernel: [21474741.235000] usb 1-1: configuration #1 chosen from 1 choice Mar 16 20:03:27 deanna kernel: [21474742.250000] pcf50633 0-0073: usb curlim to 500 mA Mar 16 20:03:27 deanna kernel: [21474742.425000] Bluetooth: Core ver 2.14 Mar 16 20:03:27 deanna kernel: [21474742.435000] NET: Registered protocol family 31 Mar 16 20:03:27 deanna kernel: [21474742.440000] Bluetooth: HCI device and connection manager initialized Mar 16 20:03:27 deanna kernel: [21474742.450000] Bluetooth: HCI socket layer initialized Mar 16 20:03:27 deanna kernel: [21474742.940000] Bluetooth: Generic Bluetooth USB driver ver 0.4 Mar 16 20:03:27 deanna kernel: [21474742.990000] usbcore: registered new interface driver btusb Mar 16 20:03:31 deanna kernel: [21474762.275000] NET: Registered protocol family 10 Mar 16 20:03:42 deanna kernel: [21474773.105000] usb0: no IPv6 routers present Mar 16 20:04:12 belanna kernel: usb 5-1: USB disconnect, address 13 Mar 16 20:04:12 belanna kernel: usb0: unregister 'cdc_ether' usb-0000:00:1d.3-1, CDC Ethernet Device (belanna is my desktop, deanna the freerunner which logs to belanna via rsyslog.) Side note: after the boot the the gsm, wifi and bt devices are up, which is new. gps is down. > after an hour of research i did as a desperate attempt > om usb mode device > and there it was. Yeah, helps here too. Thanks! Mar 16 20:07:59 belanna kernel: usb 5-1: new full speed USB device using uhci_hcd and address 14 Mar 16 20:07:59 belanna kernel: usb 5-1: New USB device found, idVendor=1457, idProduct=5122 Mar 16 20:07:59 belanna kernel: usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Mar 16 20:07:59 belanna kernel: usb 5-1: Product: RNDIS/Ethernet Gadget Mar 16 20:07:59 belanna kernel: usb 5-1: Manufacturer: Linux 2.6.29-rc3 with s3c2410_udc Mar 16 20:08:00 belanna kernel: usb0: register 'cdc_ether' at usb-0000:00:1d.3-1, CDC Ethernet Device, f6:a4:32:0b:f5:f2 Mar 16 20:07:49 deanna kernel: [ 183.805000] pcf50633 0-0073: usb curlim to 500 mA > simple question: what happend? why wasn't the usb not set to device > mode after a reboot? > on a related not, fsousaged did not start -- having access back, i > am going to investigate. Here ogsmd whines: 2010.03.16 20:10:09.284 ogsmd.modems.ti_calypso INFO Requesting new channel from 'fso-abyss' 2010.03.16 20:10:09.402 ogsmd.modems.ti_calypso CRITICAL Error allocating channel ogsmd.unsolicited : org.freedesktop.DBus.Error.ServiceUnknown: The name :1.23 was not provided by any .service files 2010.03.16 20:10:09.408 ogsmd.modem.abstract ERROR could not open channel UNSOL, retrying in 2 seconds Still the same after restarting frameworkd. ... Further messing around with a couple of daemons doesn't help either. Using gsm0710muxd instead of fso-abyss ... ah, that looks better. No usaged either but well. At least zavai can do the PIN dance successfully. BTW: We have two new files: /etc/freesmartphone/conf/openmoko_gta/fsousaged.conf and /etc/freesmartphone/conf/default/fsousaged.conf (look like /etc/freesmartphone/fsousaged.conf). What does this tell us? Some time laster fsousaged runs. Whatever has started it. Hm. 2010-03-16T19:36:48.108892Z [WARN] UsageController <0 R>: Invalid lowlevel_type none; suspend/resume will NOT be available! That's probably from my /etc/freesmartphone/fsousaged.conf. Or from /etc/freesmartphone/conf/default/fsousaged.conf. Trial-and-error. Seems to be from /etc/freesmartphone/fsousaged.conf. 2010-03-16T19:42:25.417927Z [INFO] fsousaged : Binary launched successful (FsoFrameworkFileLogger created as theLogger) 2010-03-16T19:42:25.683462Z [INFO] LowLevelKernel26 <>: Registering kernel26 low level suspend/resume handling 2010-03-16T19:42:25.684534Z [INFO] UsageController <0 R>: Ready. Using lowlevel plugin kernel26 to handle suspend/resume Now that's from /etc/freesmartphone/conf/default/fsousaged.conf, so /etc/freesmartphone/conf/openmoko_gta/fsousaged.conf seems to be ignored. Mhm. Another nice piece of info at the end: # mdbus -s org.freesmartphone.ousaged /org/freesmartphone/Usage org.freesmartphone.Usage.SetResourcePolicy GSM enabled ERROR:dbus.connection:Unable to set arguments ('GSM',) according to signature u'ss': <type 'exceptions.TypeError'>: More items found in D-Bus signature than in Python arguments /org/freesmartphone/Usage: SetResourcePolicy failed: org.freesmartphone.Usage.ResourceUnknown (Resource GSM had never been registered) Oh, well. Cheers, gregor, who --as usual-- doesn't understand all this stuff -- .''`. http://info.comodo.priv.at/ -- GPG Key IDs: 0x8649AA06, 0x00F3CFE4 : :' : Debian GNU/Linux user, admin, & developer - http://www.debian.org/ `. `' Member of VIBE!AT & SPI, fellow of Free Software Foundation Europe `- NP: Schmetterlinge: Wir hatten Gräber, ihr hattet Siege
signature.asc
Description: Digital signature
_______________________________________________ pkg-fso-maint mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/pkg-fso-maint
