Anonymized nm-tool output attached. (Though it may look peculiar, AP #2 is indeed my router and I did not mix things up while anonymizing, despite #3 having higher strength.
NetworkManager Tool

State: connected (global)

- Device: eth1  [[AP #2]] --------------------------------------------------
  Type:              802.11 WiFi
  Driver:            ipw2200
  State:             connected
  Default:           yes
  HW Address:        [eth1 MAC]

  Capabilities:

  Wireless Properties

  Wireless Access Points 
    [AP #1]:         Infra, [AP #1 BSSID], Freq 2437 MHz, Rate 54 Mb/s, 
Strength 67 WPA WPA2
    [AP #2]:         Infra, [AP #2 BSSID], Freq 2462 MHz, Rate 54 Mb/s, 
Strength 70 WPA2
    [AP #3]:         Infra, [AP #3 BSSID], Freq 2437 MHz, Rate 54 Mb/s, 
Strength 80 WEP

  IPv4 Settings:
    Address:         192.168.2.[???]
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.2.1

    DNS:             192.168.2.1


- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            b44
  State:             unavailable
  Default:           no
  HW Address:        [eth0 MAC]

  Capabilities:
    Carrier Detect:  yes

  Wired Properties
    Carrier:         off



_______________________________________________
pkg-kde-extras mailing list
pkg-kde-extras@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-kde-extras

Reply via email to