Your message dated Thu, 21 Mar 2024 19:51:16 +0000
with message-id <[email protected]>
and subject line Bug#1067247: fixed in pulseaudio 16.1+dfsg1-4
has caused the Debian Bug report #1067247,
regarding pulseaudio: FTBFS with _TIME_BITS=64 on 32-bit systems
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1067247: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1067247
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Source: pulseaudio
Version: 16.1+dfsg1-3
Severity: serious
Tags: upstream
Justification: ftbfs
User: [email protected]
Usertags: powerpc
X-Debbugs-Cc: [email protected]
Hi,
pulseaudio fails to built from source with _TIME_BITS=64 [1]:
[632/648] cc -Isrc/utils/libpulsedsp.so.p -Isrc/utils -I../src/utils -I. -I..
-Isrc -I../src -fdiagnostics-color=always -Wall -Winvalid-pch -std=gnu11 -g -O2
-Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC
-pthread -DHAVE_CONFIG_H -D_GNU_SOURCE -Wno-nonnull-compare -MD -MQ
src/utils/libpulsedsp.so.p/padsp.c.o -MF src/utils/libpulsedsp.so.p/padsp.c.o.d
-o src/utils/libpulsedsp.so.p/padsp.c.o -c ../src/utils/padsp.c
FAILED: src/utils/libpulsedsp.so.p/padsp.c.o
cc -Isrc/utils/libpulsedsp.so.p -Isrc/utils -I../src/utils -I. -I.. -Isrc
-I../src -fdiagnostics-color=always -Wall -Winvalid-pch -std=gnu11 -g -O2
-Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC
-pthread -DHAVE_CONFIG_H -D_GNU_SOURCE -Wno-nonnull-compare -MD -MQ
src/utils/libpulsedsp.so.p/padsp.c.o -MF src/utils/libpulsedsp.so.p/padsp.c.o.d
-o src/utils/libpulsedsp.so.p/padsp.c.o -c ../src/utils/padsp.c
In file included from /usr/include/features.h:393,
from /usr/include/endian.h:21,
from /usr/include/linux/soundcard.h:43,
from /usr/include/powerpc-linux-gnu/sys/soundcard.h:1,
from ../src/utils/padsp.c:33:
/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed
only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
This needs to be fixed for the time_t transition [2].
Thanks,
Adrian
> [1]
> https://buildd.debian.org/status/fetch.php?pkg=pulseaudio&arch=powerpc&ver=16.1%2Bdfsg1-3%2Bb1&stamp=1710500596&raw=0
> [2] https://wiki.debian.org/ReleaseGoals/64bit-time
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; remixing-produce-lfe = no
; remixing-consume-lfe = no
; lfe-crossover-freq = 0
; flat-volumes = no
; rescue-streams = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the
paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
### Allow including a default.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail
.include /etc/pulse/default.pa.d
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
### Allow including a system.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail
.include /etc/pulse/system.pa.d
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Playback/recording through the PulseAudio sound server
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "16.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "16.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "16.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "16.1"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices
are plugged/unplugged"
module.version = "16.1"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "16.1"
Module #6
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth
devices out-of-the-box easier"
module.version = "16.1"
Module #7
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and
load the corresponding discovery module"
module.version = "16.1"
Module #8
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio
devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "16.1"
Module #9
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "16.1"
Module #10
Name: module-gsettings
Argument:
Usage counter: n/a
Properties:
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "16.1"
Module #11
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "16.1"
Module #12
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.version = "16.1"
Module #13
Name: module-null-sink
Argument: sink_name=auto_null
sink_properties='device.description="Dummy Output"'
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "Clocked NULL sink"
module.version = "16.1"
Module #14
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "16.1"
Module #15
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "16.1"
Module #16
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "16.1"
Module #17
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "16.1"
Module #18
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "16.1"
Module #19
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "16.1"
Module #20
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "16.1"
Sink #0
State: IDLE
Name: auto_null
Description: Dummy Output
Driver: module-null-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 13
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: auto_null.monitor
Latency: 1977152 usec, configured 2000000 usec
Flags: DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
device.description = "Dummy Output"
device.class = "abstract"
device.icon_name = "audio-card"
Formats:
pcm
Source #0
State: IDLE
Name: auto_null.monitor
Description: Monitor of Dummy Output
Driver: module-null-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 13
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: auto_null
Latency: 0 usec, configured 2000000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Dummy Output"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 16
Properties:
application.name = "Login Session c3440"
systemd-login.session = "c3440"
Client #1
Driver: module-systemd-login.c
Owner Module: 16
Properties:
application.name = "Login Session c3420"
systemd-login.session = "c3420"
Client #3
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "2664813"
application.process.user = "glaubitz"
application.process.host = "nofan"
application.process.binary = "pactl"
application.language = "C"
application.process.machine_id =
"bf6401acce8a4335837f004eb538b395"
application.process.session_id = "c3440"
Server String: /run/user/176681/pulse/native
Library Protocol Version: 35
Server Protocol Version: 35
Is Local: yes
Client Index: 4
Tile Size: 65472
User Name: glaubitz
Host Name: nofan
Server Name: pulseaudio
Server Version: 16.1
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: auto_null
Default Source: auto_null.monitor
Cookie: a011:4804
--- End Message ---
--- Begin Message ---
Source: pulseaudio
Source-Version: 16.1+dfsg1-4
Done: Jeremy Bícha <[email protected]>
We believe that the bug you reported is fixed in the latest version of
pulseaudio, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Jeremy Bícha <[email protected]> (supplier of updated pulseaudio package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Thu, 21 Mar 2024 15:35:29 -0400
Source: pulseaudio
Built-For-Profiles: noudeb
Architecture: source
Version: 16.1+dfsg1-4
Distribution: unstable
Urgency: medium
Maintainer: Pulseaudio maintenance team
<[email protected]>
Changed-By: Jeremy Bícha <[email protected]>
Closes: 1067247
Changes:
pulseaudio (16.1+dfsg1-4) unstable; urgency=medium
.
* Team upload
* Selectively disable libpulsedsp & padsp on 32-bit non-i386 architectures.
Thanks to Simon McVittie, Steve Langasek (Closes: #1067247)
Checksums-Sha1:
89960442f5681ad8c31c494975ff3291140755aa 3766 pulseaudio_16.1+dfsg1-4.dsc
3e22725e00ba1788951eba0a1c0de954df5ee612 38556
pulseaudio_16.1+dfsg1-4.debian.tar.xz
e66abd27affaf3c190535cc433c1a935e391452d 18905
pulseaudio_16.1+dfsg1-4_source.buildinfo
Checksums-Sha256:
97d847ad79fc36e745bbd28aa34dbb61b8b1825f5939d117164f47d036f560da 3766
pulseaudio_16.1+dfsg1-4.dsc
b0ae3d8f85b62e64e3f59319886f9c7bc36a555516040a11d78820c6bf9fb00a 38556
pulseaudio_16.1+dfsg1-4.debian.tar.xz
c137479e2ca93f018b6765c3025a600122dbbfae701c928876e43a54f65423a8 18905
pulseaudio_16.1+dfsg1-4_source.buildinfo
Files:
8877bf3a3f99d445fd49ce83fa044163 3766 sound optional
pulseaudio_16.1+dfsg1-4.dsc
4b78d0f975f93834a1f6ff62c6172cac 38556 sound optional
pulseaudio_16.1+dfsg1-4.debian.tar.xz
07eea26fbc97420e47d3755385e21965 18905 sound optional
pulseaudio_16.1+dfsg1-4_source.buildinfo
-----BEGIN PGP SIGNATURE-----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=3Tff
-----END PGP SIGNATURE-----
pgpLtDZ25WF8M.pgp
Description: PGP signature
--- End Message ---
_______________________________________________
pkg-pulseaudio-devel mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-pulseaudio-devel
