Your message dated Fri, 30 May 2014 11:28:56 -0400
with message-id
<caafdzj8emafbq+euq7gxa6nlefrshpeee7z7cpudmbeupfs...@mail.gmail.com>
and subject line Re: Bug#671383: pulseaudio: module-udev-detect fails to find
the soundcard (hence dummy output aka no sound)
has caused the Debian Bug report #671383,
regarding pulseaudio: module-udev-detect fails to find the soundcard (hence
dummy output aka no sound)
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
671383: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=671383
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: pulseaudio
Version: 1.1-3
Severity: important
Dear Maintainer,
Problem: out-of the box pulseaudio gives a "dummy output" in Kmix aka no sound
Diagnostics:
I think that there is a problem with the start-up execution of the
module-udev-detect.
I cannot say if it is the timing when the module is executed, or the module
itself.
Executing
pkill pulse ; sleep 10 ; pulseaudio -vvvv
gives back sound.
The manual fix below gives an apparently working pulseaudio, and explains why
the problem concerns module-udev-detect.
This bug is related with
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=551498
up to you to decide if to merge or not.
Good luck
Ric
### (Dirty) manual fix ###
manually load the sound card that for me happens to be card 0 and disable
theloading of module-udev-detect
~# diff _etc_pulse_default.pa_original /etc/pulse/default.pa
44,45c44,45
< #load-module module-alsa-sink
< #load-module module-alsa-source device=hw:1,0
---
> load-module module-alsa-sink
> load-module module-alsa-source device=hw:0
53c53
< load-module module-udev-detect
---
> #load-module module-udev-detect
The following to activate debugging output
~# diff _etc_pulse_daemon.conf_original /etc/pulse/daemon.conf
48,49c48,50
< ; log-target = auto
< ; log-level = notice
---
> ; log-target = syslog
> ; log-level = device
> ; log-time = yes
~#
Sound is back
~$ pacmd list-sinks
Welcome to PulseAudio! Use "help" for usage information.
>>> 1 sink(s) available.
* index: 0
name: <alsa_output.default>
driver: <module-alsa-sink.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s32le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 170.67 ms
module: 4
properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "AD198x Analog"
alsa.id = "AD198x Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfebfc000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "82801I (ICH9 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "default"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "8192"
device.access_mode = "mmap+timer"
device.description = "Internal Audio"
device.icon_name = "audio-card-pci"
~$ pacmd list-sources
Welcome to PulseAudio! Use "help" for usage information.
>>> 2 source(s) available.
index: 0
name: <alsa_output.default.monitor>
driver: <module-alsa-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s32le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 170.67 ms
monitor_of: 0
module: 4
properties:
device.description = "Monitor of Internal Audio"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
* index: 1
name: <alsa_input.hw_0>
driver: <module-alsa-source.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "AD198x Analog"
alsa.id = "AD198x Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfebfc000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "82801I (ICH9 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "hw:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.description = "Internal Audio"
device.icon_name = "audio-input-microphone-pci"
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages pulseaudio depends on:
ii adduser 3.113+nmu1
ii consolekit 0.4.5-3
ii libasound2 1.0.25-2
ii libasound2-plugins 1.0.25-1+b1
ii libc6 2.13-27
ii libcap2 1:2.22-1
ii libdbus-1-3 1.4.18-1
ii libfftw3-3 3.3-1
ii libice6 2:1.0.7-2
ii libltdl7 2.4.2-1
ii liborc-0.4-0 1:0.4.16-1
ii libpulse0 1.1-3
ii libsamplerate0 0.1.8-4
ii libsm6 2:1.2.0-2
ii libsndfile1 1.0.25-4
ii libspeexdsp1 1.2~rc1-3
ii libtdb1 1.2.9-4+b1
ii libudev0 175-3.1
ii libx11-6 2:1.4.4-4
ii libx11-xcb1 2:1.4.4-4
ii libxcb1 1.8.1-1
ii libxtst6 2:1.2.0-4
ii lsb-base 3.2+Debian31
ii udev 175-3.1
Versions of packages pulseaudio recommends:
ii gstreamer0.10-pulseaudio 0.10.31-1
ii pulseaudio-esound-compat 1.1-3
ii pulseaudio-module-x11 1.1-3
ii rtkit 0.10-2
Versions of packages pulseaudio suggests:
ii paman <none>
ii paprefs <none>
ii pavucontrol 0.99.2-1
ii pavumeter <none>
ii pulseaudio-utils 1.1-3
-- Configuration Files:
/etc/pulse/daemon.conf changed:
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = syslog
; log-level = device
; log-time = yes
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-3
; enable-remixing = yes
; enable-lfe-remixing = no
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
; default-sample-rate = 44100
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
/etc/pulse/default.pa changed:
..nofail
..fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-alsa-sink
load-module module-alsa-source device=hw:0
..ifexists module-udev-detect.so
..else
load-module module-detect
..endif
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect
..fail
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
..ifexists module-console-kit.so
load-module module-console-kit
..endif
load-module module-position-event-sounds
load-module module-cork-music-on-phone
load-module module-filter-heuristics
load-module module-filter-apply
..ifexists module-dbus-protocol.so
load-module module-dbus-protocol
..endif
-- no debconf information
--- End Message ---
--- Begin Message ---
Version: 5.0-2
Hi,
On Fri, May 30, 2014 at 9:30 AM, <r.duc...@gmail.com> wrote:
> pulseaudio 5.0-2 (+clean pulseaudio.pa from the debian package): sound works.
>
> As far as concerns myself you can close the bug, thanks!
Excellent! Closing the bug then.
--
Saludos,
Felipe Sateler
--- End Message ---
_______________________________________________
pkg-pulseaudio-devel mailing list
pkg-pulseaudio-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-pulseaudio-devel