--- Begin Message ---
Package: pulseaudio
Version: 5.0-13
Severity: important
hi,
i am using debian gnu linux 8 and that with some more than one programm that is
using audio (multiple mpvs, virtualboxes, mumbles, etc) and now i have typed in
as usual
apt-get upgrade
and since then the i can only have one application recording at once
which is a big problem
please fix that soon
thanks
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: 8.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.2.0-0.bpo.1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.113+nmu3
ii libasound2 1.0.28-1
ii libasound2-plugins 1.0.28-1+b1
ii libc6 2.19-18+deb8u1
ii libcap2 1:2.24-8
ii libdbus-1-3 1.8.20-0+deb8u1
ii libfftw3-single3 3.3.4-2
ii libgcc1 1:4.9.2-10
ii libice6 2:1.0.9-1+b1
ii libltdl7 2.4.2-1.11
ii liborc-0.4-0 1:0.4.22-1
ii libpulse0 5.0-13
ii libsamplerate0 0.1.8-8
ii libsm6 2:1.2.2-1+b1
ii libsndfile1 1.0.25-9.1
ii libspeexdsp1 1.2~rc1.2-1
ii libstdc++6 4.9.2-10
ii libsystemd0 215-17+deb8u2
ii libtdb1 1.3.1-1
ii libudev1 215-17+deb8u2
ii libwebrtc-audio-processing-0 0.1-3
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb1 1.10-3+b1
ii libxtst6 2:1.2.2-1+b1
ii lsb-base 4.1+Debian13+nmu1
ii pulseaudio-utils 5.0-13
ii udev 215-17+deb8u2
Versions of packages pulseaudio recommends:
ii pulseaudio-module-x11 5.0-13
ii rtkit 0.11-2
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
ii pavucontrol 2.0-3
ii pavumeter 0.9.3-4
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
# resample-method defaults to speex-float-1 on most architectures,
# speex-fixed-1 on ARM
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
..nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
..fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
..endif
### Automatically connect sink and source if JACK server is present
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
### Automatically load driver modules for Bluetooth hardware
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with
the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=SB
HDA ATI SB, ALC888 Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Front speakers
surround21:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC888 Digital
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Direct sample mixing device
dmix:CARD=SB,DEV=1
HDA ATI SB, ALC888 Digital
Direct sample mixing device
dsnoop:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Direct sample snooping device
dsnoop:CARD=SB,DEV=1
HDA ATI SB, ALC888 Digital
Direct sample snooping device
hw:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Direct hardware device without any conversions
hw:CARD=SB,DEV=1
HDA ATI SB, ALC888 Digital
Direct hardware device without any conversions
plughw:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Hardware device with all software conversions
plughw:CARD=SB,DEV=1
HDA ATI SB, ALC888 Digital
Hardware device with all software conversions
sysdefault:CARD=Headset
Logitech USB Headset, USB Audio
Default Audio Device
front:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
Front speakers
surround21:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
Direct sample mixing device
dsnoop:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
Direct sample snooping device
hw:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
Direct hardware device without any conversions
plughw:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
Hardware device with all software conversions
Card #1
Name: alsa_card.pci-0000_00_14.2
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xf9ff0000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "0"
device.description = "Internes Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1,
priority: 60, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex
(sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks:
1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround
4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760,
available: yes)
output:analog-surround-41: Analog Surround 4.1 Output (sinks:
1, sources: 0, priority: 800, available: yes)
output:analog-surround-41+input:analog-stereo: Analog Surround
4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860,
available: yes)
output:analog-surround-50: Analog Surround 5.0 Output (sinks:
1, sources: 0, priority: 700, available: yes)
output:analog-surround-50+input:analog-stereo: Analog Surround
5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760,
available: yes)
output:analog-surround-51: Analog Surround 5.1 Output (sinks:
1, sources: 0, priority: 800, available: yes)
output:analog-surround-51+input:analog-stereo: Analog Surround
5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860,
available: yes)
output:analog-surround-71: Analog Surround 7.1 Output (sinks:
1, sources: 0, priority: 700, available: yes)
output:analog-surround-71+input:analog-stereo: Analog Surround
7.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760,
available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1,
sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo
(IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5560,
available: yes)
off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (priority: 8500,
latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo
analog-input-rear-mic: Rear Microphone (priority: 8200, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo
analog-input-linein: Line In (priority: 8100, latency offset: 0
usec, not available)
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo
analog-output-lineout: Line Out (priority: 9900, latency
offset: 0 usec, available)
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo, output:analog-surround-41,
output:analog-surround-41+input:analog-stereo, output:analog-surround-50,
output:analog-surround-50+input:analog-stereo, output:analog-surround-51,
output:analog-surround-51+input:analog-stereo, output:analog-surround-71,
output:analog-surround-71+input:analog-stereo
analog-output-headphones: Analoge Kopfhörer (priority: 9000,
latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): output:iec958-stereo,
output:iec958-stereo+input:analog-stereo
Card #10
Name: alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset
Driver: module-alsa-card.c
Owner Module: 32
Properties:
alsa.card = "1"
alsa.card_name = "Logitech USB Headset"
alsa.long_card_name = "Logitech Logitech USB Headset at
usb-0000:00:12.1-3.2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.1-usb-0:3.2:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3.2/5-3.2:1.0/sound/card1"
udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a45"
device.product.name = "Logitech USB Headset"
device.serial = "Logitech_Logitech_USB_Headset"
device.form_factor = "headset"
device.string = "1"
device.description = "Logitech USB Headset"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Profiles:
input:analog-mono: Analog Mono Input (sinks: 0, sources: 1,
priority: 1, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6000, available: yes)
output:analog-stereo+input:analog-mono: Analog Stereo Output +
Analog Mono Input (sinks: 1, sources: 1, priority: 6001, available: yes)
off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-mono
Ports:
analog-input-mic: Mikrofon (priority: 8700, latency offset: 0
usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono,
output:analog-stereo+input:analog-mono
analog-output-headphones: Analoge Kopfhörer (priority: 9000,
latency offset: 0 usec)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-mono
Sink #1
State: RUNNING
Name: alsa_output.pci-0000_00_14.2.analog-stereo
Description: Internes Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 34078 / 52% / -17.04 dB, front-right: 34078 /
52% / -17.04 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
Latency: 95710 usec, configured 96000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC888 Analog"
alsa.id = "ALC888 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xf9ff0000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internes Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC888"
alsa.components = "HDA:10ec0888,14627551,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-lineout: Line Out (priority: 9900, available)
analog-output-headphones: Analoge Kopfhörer (priority: 9000,
not available)
Active Port: analog-output-lineout
Formats:
pcm
Sink #10
State: RUNNING
Name:
alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo
Description: Logitech USB Headset Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 32
Mute: no
Volume: front-left: 56378 / 86% / -3.92 dB, front-right: 56378 /
86% / -3.92 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source:
alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo.monitor
Latency: 102248 usec, configured 99954 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Logitech USB Headset"
alsa.long_card_name = "Logitech Logitech USB Headset at
usb-0000:00:12.1-3.2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.1-usb-0:3.2:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3.2/5-3.2:1.0/sound/card1"
udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a45"
device.product.name = "Logitech USB Headset"
device.serial = "Logitech_Logitech_USB_Headset"
device.form_factor = "headset"
device.string = "front:1"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Logitech USB Headset Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:0a45"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Ports:
analog-output-headphones: Analoge Kopfhörer (priority: 9000)
Active Port: analog-output-headphones
Formats:
pcm
Source #2
State: RUNNING
Name: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
Description: Monitor of Internes Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_14.2.analog-stereo
Latency: 0 usec, configured 96000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Internes Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xf9ff0000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #19
State: RUNNING
Name:
alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo.monitor
Description: Monitor of Logitech USB Headset Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 32
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink:
alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo
Latency: 0 usec, configured 99954 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Logitech USB Headset Analog
Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "Logitech USB Headset"
alsa.long_card_name = "Logitech Logitech USB Headset at
usb-0000:00:12.1-3.2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.1-usb-0:3.2:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3.2/5-3.2:1.0/sound/card1"
udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a45"
device.product.name = "Logitech USB Headset"
device.serial = "Logitech_Logitech_USB_Headset"
device.form_factor = "headset"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Formats:
pcm
Source #20
State: RUNNING
Name:
alsa_input.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-mono
Description: Logitech USB Headset Analog Mono
Driver: module-alsa-card.c
Sample Specification: s16le 1ch 44100Hz
Channel Map: mono
Owner Module: 32
Mute: no
Volume: mono: 54384 / 83% / -4.86 dB
balance 0.00
Base Volume: 21535 / 33% / -29.00 dB
Monitor of Sink: n/a
Latency: 394 usec, configured 99954 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Logitech USB Headset"
alsa.long_card_name = "Logitech Logitech USB Headset at
usb-0000:00:12.1-3.2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.1-usb-0:3.2:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3.2/5-3.2:1.0/sound/card1"
udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a45"
device.product.name = "Logitech USB Headset"
device.serial = "Logitech_Logitech_USB_Headset"
device.form_factor = "headset"
device.string = "hw:1"
device.buffering.buffer_size = "8816"
device.buffering.fragment_size = "2204"
device.access_mode = "mmap"
device.profile.name = "analog-mono"
device.profile.description = "Analog Mono"
device.description = "Logitech USB Headset Analog Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:0a45"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Ports:
analog-input-mic: Mikrofon (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "5.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "5.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "5.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "5.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "5.0"
Module #7
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_14.2"
card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 23
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #8
Name: module-jackdbus-detect
Argument: channels=2
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Adds JACK sink/source ports when JACK is
started"
module.version = "5.0"
Module #9
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "5.0"
Module #10
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "5.0"
Module #11
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "5.0"
Module #12
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Hält stets einen Sink geladen, selbst
wenn dies ein Null-Sink ist"
module.version = "5.0"
Module #13
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "5.0"
Module #14
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "5.0"
Module #15
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "5.0"
Module #16
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "5.0"
Module #17
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "5.0"
Module #18
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "5.0"
Module #19
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "5.0"
Module #20
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "5.0"
Module #21
Name: module-x11-publish
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "5.0"
Module #22
Name: module-x11-cork-request
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "5.0"
Module #23
Name: module-x11-xsmp
Argument: display=:0
session_manager=local/treakis-debian-rechsud02:@/tmp/.ICE-unix/2514,unix/treakis-debian-rechsud02:/tmp/.ICE-unix/2514
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "5.0"
Module #32
Name: module-alsa-card
Argument: device_id="1"
name="usb-Logitech_Logitech_USB_Headset-00-Headset"
card_name="alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset"
namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no
deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 10
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 29
Server Protocol Version: 29
Is Local: yes
Client Index: 107
Tile Size: 65472
User Name: treaki
Host Name: treakis-debian-rechsud02
Server Name: pulseaudio
Server Version: 5.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_14.2.analog-stereo
Default Source:
alsa_input.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-mono
Cookie: 7a36:20ae
--- End Message ---
