> what make you believe this is a bug in update-rc.d and > not in postfix or dnsmasq? I am not sure where the bug belongs, i just took a look at dnsmasq LSB header and it looked okay.
I am attaching the output of /usr/share/insserv/make-testsuite -- Salvo Tomaselli
set +C cat <<'EOF' > $insconf $local_fs +mountall +mountoverflowtmp +umountfs $network +networking +ifupdown $named +named +dnsmasq +lwresd +bind9 +unbound $network $remote_fs $local_fs +mountnfs +mountnfs-bootclean +umountnfs +sendsigs $syslog +rsyslog +sysklogd +syslog-ng +dsyslog +inetutils-syslogd $time +hwclock <interactive> glibc udev console-screen keymap keyboard-setup console-setup cryptdisks cryptdisks-early checkfs-loop EOF set -C addscript acpid <<'EOF' ### BEGIN INIT INFO # Provides: acpid # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # X-Start-Before: kdm gdm3 xdm # X-Stop-After: kdm gdm3 xdm # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Start the Advanced Configuration and Power Interface daemon # Description: Provide a socket for X11, hald and others to multiplex # kernel ACPI events. ### END INIT INFO EOF addscript alsa-utils <<'EOF' ### BEGIN INIT INFO # Provides: alsa-utils # Required-Start: $local_fs $remote_fs # Required-Stop: $remote_fs # Default-Start: S # Default-Stop: 0 1 6 # Short-Description: Restore and store ALSA driver settings # Description: This script stores and restores mixer levels on # shutdown and bootup.On sysv-rc systems: to # disable storing of mixer levels on shutdown, # remove /etc/rc[06].d/K50alsa-utils. To disable # restoring of mixer levels on bootup, rename the # "S50alsa-utils" symbolic link in /etc/rcS.d/ to # "K50alsa-utils". ### END INIT INFO EOF addscript avahi-daemon <<'EOF' ### BEGIN INIT INFO # Provides: avahi # Required-Start: $remote_fs dbus # Required-Stop: $remote_fs dbus # Should-Start: $syslog # Should-Stop: $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Avahi mDNS/DNS-SD Daemon # Description: Zeroconf daemon for configuring your network # automatically ### END INIT INFO EOF addscript bootlogd <<'EOF' ### BEGIN INIT INFO # Provides: bootlogd # Required-Start: mountdevsubfs # X-Start-Before: hostname keymap keyboard-setup procps pcmcia hwclock hwclockfirst hdparm hibernate-cleanup lvm2 # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: Start or stop bootlogd. # Description: Starts or stops the bootlogd log program # which logs boot messages. ### END INIT INFO EOF addscript bootlogs <<'EOF' ### BEGIN INIT INFO # Provides: bootlogs # Required-Start: hostname $local_fs # Required-Stop: # Should-Start: $x-display-manager gdm kdm xdm ldm sdm wdm nodm # Default-Start: 1 2 3 4 5 # Default-Stop: # Short-Description: Log file handling to be done during bootup. # Description: Various things that don't need to be done particularly # early in the boot, just before getty is run. ### END INIT INFO EOF addscript bootmisc.sh <<'EOF' ### BEGIN INIT INFO # Provides: bootmisc # Required-Start: $remote_fs # Required-Stop: # Should-Start: udev # Default-Start: S # Default-Stop: # Short-Description: Miscellaneous things to be done during bootup. # Description: Some cleanup. Note, it need to run after mountnfs-bootclean.sh. ### END INIT INFO EOF addscript checkfs.sh <<'EOF' ### BEGIN INIT INFO # Provides: checkfs # Required-Start: checkroot # Required-Stop: # Should-Start: mtab # Default-Start: S # Default-Stop: # X-Interactive: true # Short-Description: Check all filesystems. ### END INIT INFO EOF addscript checkroot-bootclean.sh <<'EOF' ### BEGIN INIT INFO # Provides: checkroot-bootclean # Required-Start: checkroot # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: bootclean after checkroot. # Description: Clean temporary filesystems after # the root filesystem has been mounted. # At this point, directories which may be # masked by future mounts may be cleaned. ### END INIT INFO EOF addscript checkroot.sh <<'EOF' ### BEGIN INIT INFO # Provides: checkroot # Required-Start: mountdevsubfs hostname # Required-Stop: # Should-Start: keymap hwclockfirst hdparm bootlogd # Should-stop: # Default-Start: S # Default-Stop: # X-Interactive: true # Short-Description: Check to root file system. ### END INIT INFO EOF addscript console-setup <<'EOF' ### BEGIN INIT INFO # Provides: console-setup # Required-Start: $remote_fs # Required-Stop: # Should-Start: console-screen kbd # Default-Start: S # Default-Stop: # X-Interactive: true # Short-Description: Set console font and keymap ### END INIT INFO EOF addscript cpufrequtils <<'EOF' ### BEGIN INIT INFO # Provides: cpufrequtils # Required-Start: $remote_fs loadcpufreq # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: set CPUFreq kernel parameters # Description: utilities to deal with CPUFreq Linux # kernel support ### END INIT INFO EOF addscript cron <<'EOF' ### BEGIN INIT INFO # Provides: cron # Required-Start: $remote_fs $syslog $time # Required-Stop: $remote_fs $syslog $time # Should-Start: $network $named slapd autofs ypbind nscd nslcd # Should-Stop: $network $named slapd autofs ypbind nscd nslcd # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Regular background program processing daemon # Description: cron is a standard UNIX program that runs user-specified # programs at periodic scheduled times. vixie cron adds a # number of features to the basic UNIX cron, including better # security and more powerful configuration options. ### END INIT INFO EOF addscript dbus <<'EOF' ### BEGIN INIT INFO # Provides: dbus # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: D-Bus systemwide message bus # Description: D-Bus is a simple interprocess messaging system, used # for sending messages between applications. ### END INIT INFO EOF addscript dnsmasq <<'EOF' ### BEGIN INIT INFO # Provides: dnsmasq # Required-Start: $network $remote_fs $syslog # Required-Stop: $network $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Description: DHCP and DNS server ### END INIT INFO EOF addscript fetchmail <<'EOF' ### BEGIN INIT INFO # Provides: fetchmail # Required-Start: $network $local_fs $remote_fs $syslog # Required-Stop: $remote_fs # Should-Start: $mail-transport-agent exim4 $named # Should-Stop: $mail-transport-agent exim4 # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: init-Script for system wide fetchmail daemon # Description: Enable service provided by fetchmail in daemon mode ### END INIT INFO EOF addscript halt <<'EOF' ### BEGIN INIT INFO # Provides: halt # Required-Start: # Required-Stop: # Default-Start: # Default-Stop: 0 # Short-Description: Execute the halt command. # Description: ### END INIT INFO EOF addscript hostname.sh <<'EOF' ### BEGIN INIT INFO # Provides: hostname # Required-Start: # Required-Stop: # Should-Start: glibc # Default-Start: S # Default-Stop: # Short-Description: Set hostname based on /etc/hostname # Description: Read the machines hostname from /etc/hostname, and # update the kernel value with this value. If # /etc/hostname is empty, the current kernel value # for hostname is used. If the kernel value is # empty, the value 'localhost' is used. ### END INIT INFO EOF addscript hwclock.sh <<'EOF' ### BEGIN INIT INFO # Provides: hwclock # Required-Start: mountdevsubfs # Required-Stop: $local_fs # Default-Start: S # X-Start-Before: checkroot # Default-Stop: 0 6 ### END INIT INFO EOF addscript kbd <<'EOF' ### BEGIN INIT INFO # Provides: kbd # Required-Start: $remote_fs # Required-Stop: # Default-Start: S # Default-Stop: # X-Interactive: true # Description: Set console screen modes and fonts # Short-Description: Prepare console ### END INIT INFO EOF addscript kdm <<'EOF' ### BEGIN INIT INFO # Provides: kdm # Required-Start: $local_fs $remote_fs # Required-Stop: $local_fs $remote_fs # Should-Start: console-screen kbd acpid dbus hal krb5-kdc # Should-Stop: console-screen kbd # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: X display manager for KDE # Description: KDM manages a collection of X servers, which may be on the local host or remote machines. ### END INIT INFO EOF addscript keyboard-setup <<'EOF' ### BEGIN INIT INFO # Provides: keyboard-setup # Required-Start: mountkernfs # Required-Stop: # Should-Start: keymap udev # X-Start-Before: checkroot # Default-Start: S # Default-Stop: # X-Interactive: true # Short-Description: Set preliminary keymap # Description: Set the console keyboard as early as possible # so during the file systems checks the administrator # can interact. At this stage of the boot process # only the ASCII symbols are supported. ### END INIT INFO EOF addscript killprocs <<'EOF' ### BEGIN INIT INFO # Provides: killprocs # Required-Start: $local_fs # Required-Stop: # Default-Start: 1 # Default-Stop: # Short-Description: executed by init(8) upon entering runlevel 1 (single). ### END INIT INFO EOF addscript kmod <<'EOF' ### BEGIN INIT INFO # Provides: kmod # Required-Start: # Required-Stop: # Should-Start: checkroot # Should-Stop: # Default-Start: S # Default-Stop: # Short-Description: Load the modules listed in /etc/modules. # Description: Load the modules listed in /etc/modules. ### END INIT INFO EOF addscript loadcpufreq <<'EOF' ### BEGIN INIT INFO # Provides: loadcpufreq # Required-Start: $remote_fs $syslog # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Load kernel modules needed to enable cpufreq scaling # Description: Make it possible to save power by reducing # the CPU speed when there is little to do. ### END INIT INFO EOF addscript miredo <<'EOF' ### BEGIN INIT INFO # Provides: miredo # Required-Start: $local_fs $remote_fs $network $syslog # Required-Stop: $local_fs $remote_fs $syslog # Short-Description: Teredo IPv6 tunnel # Description: Miredo daemon for tunneling of IPv6 through NAT # within UDP/IPv4, as specified by the Teredo mechanism. # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 ### END INIT INFO EOF addscript motd <<'EOF' ### BEGIN INIT INFO # Provides: motd # Required-Start: hostname $local_fs # Required-Stop: # Should-Start: # Default-Start: 1 2 3 4 5 # Default-Stop: # Short-Description: Create dynamic part of /etc/motd # Description: /etc/motd is user-editable and static. This script # creates the initial dynamic part, by default the # output of uname, and stores it in /var/run/motd.dynamic. # Both parts are output by pam_motd. ### END INIT INFO EOF addscript mountall-bootclean.sh <<'EOF' ### BEGIN INIT INFO # Provides: mountall-bootclean # Required-Start: mountall # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: bootclean after mountall. # Description: Clean temporary filesystems after # all local filesystems have been mounted. ### END INIT INFO EOF addscript mountall.sh <<'EOF' ### BEGIN INIT INFO # Provides: mountall # Required-Start: checkfs # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: Mount all filesystems. # Description: ### END INIT INFO EOF addscript mountdevsubfs.sh <<'EOF' ### BEGIN INIT INFO # Provides: mountdevsubfs # Required-Start: mountkernfs # Required-Stop: # Should-Start: udev # Default-Start: S # Default-Stop: # Short-Description: Mount special file systems under /dev. # Description: Mount the virtual filesystems the kernel provides # that ordinarily live under the /dev filesystem. ### END INIT INFO EOF addscript mountkernfs.sh <<'EOF' ### BEGIN INIT INFO # Provides: mountkernfs # Required-Start: # Required-Stop: # Should-Start: glibc # Default-Start: S # Default-Stop: # Short-Description: Mount kernel virtual file systems. # Description: Mount initial set of virtual filesystems the kernel # provides and that are required by everything. ### END INIT INFO EOF addscript mountnfs-bootclean.sh <<'EOF' ### BEGIN INIT INFO # Provides: mountnfs-bootclean # Required-Start: $local_fs mountnfs # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: bootclean after mountnfs. # Description: Clean temporary filesystems after # network filesystems have been mounted. ### END INIT INFO EOF addscript mountnfs.sh <<'EOF' ### BEGIN INIT INFO # Provides: mountnfs # Required-Start: $local_fs # Required-Stop: # Should-Start: $network $portmap nfs-common udev-mtab # Default-Start: S # Default-Stop: # Short-Description: Wait for network file systems to be mounted # Description: Network file systems are mounted by # /etc/network/if-up.d/mountnfs in the background # when interfaces are brought up; this script waits # for them to be mounted before carrying on. ### END INIT INFO EOF addscript mtab.sh <<'EOF' ### BEGIN INIT INFO # Provides: mtab # Required-Start: checkroot # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: Update mtab file. # Description: Update the mount program's mtab file after # all local filesystems have been mounted. ### END INIT INFO EOF addscript networking <<'EOF' ### BEGIN INIT INFO # Provides: networking ifupdown # Required-Start: mountkernfs $local_fs urandom # Required-Stop: $local_fs # Default-Start: S # Default-Stop: 0 6 # Short-Description: Raise network interfaces. # Description: Prepare /run/network directory, ifstate file and raise network interfaces, or take them down. ### END INIT INFO EOF addscript postfix <<'EOF' ### BEGIN INIT INFO # Provides: postfix mail-transport-agent # Required-Start: $local_fs $remote_fs $syslog $named $network $time # Required-Stop: $local_fs $remote_fs $syslog $named $network # Should-Start: postgresql mysql clamav-daemon postgrey spamassassin saslauthd dovecot # Should-Stop: postgresql mysql clamav-daemon postgrey spamassassin saslauthd dovecot # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop the Postfix Mail Transport Agent # Description: postfix is a Mail Transport agent ### END INIT INFO EOF addscript procps <<'EOF' ### BEGIN INIT INFO # Provides: procps # Required-Start: mountkernfs $local_fs # Required-Stop: # Should-Start: udev module-init-tools # Default-Start: S # Default-Stop: # Short-Description: Configure kernel parameters at boottime # Description: Loads kernel parameters that are specified in /etc/sysctl.conf ### END INIT INFO EOF addscript rc.local <<'EOF' ### BEGIN INIT INFO # Provides: rc.local # Required-Start: $all # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Run /etc/rc.local if it exist ### END INIT INFO EOF addscript reboot <<'EOF' ### BEGIN INIT INFO # Provides: reboot # Required-Start: # Required-Stop: # Default-Start: # Default-Stop: 6 # Short-Description: Execute the reboot command. # Description: ### END INIT INFO EOF addscript rmnologin <<'EOF' ### BEGIN INIT INFO # Provides: rmnologin # Required-Start: $remote_fs $all # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Remove /etc/nologin at boot # Description: This script removes the /etc/nologin file as the # last step in the boot process, if DELAYLOGIN=yes. # If DELAYLOGIN=no, /etc/nologin was not created by # bootmisc earlier in the boot process. ### END INIT INFO EOF addscript rsync <<'EOF' ### BEGIN INIT INFO # Provides: rsyncd # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Should-Start: $named # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: fast remote file copy program daemon # Description: rsync is a program that allows files to be copied to and # from remote machines in much the same way as rcp. # This provides rsyncd daemon functionality. ### END INIT INFO EOF addscript rsyslog <<'EOF' ### BEGIN INIT INFO # Provides: rsyslog # Required-Start: $remote_fs $time # Required-Stop: umountnfs $time # X-Stop-After: sendsigs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: enhanced syslogd # Description: Rsyslog is an enhanced multi-threaded syslogd. # It is quite compatible to stock sysklogd and can be # used as a drop-in replacement. ### END INIT INFO EOF addscript screen-cleanup <<'EOF' ### BEGIN INIT INFO # Provides: screen-cleanup # Required-Start: $remote_fs # Required-Stop: $remote_fs # Default-Start: S # Default-Stop: # Short-Description: screen sessions cleaning # Description: Cleans up the screen session directory and fixes its # permissions if needed. ### END INIT INFO EOF addscript sendsigs <<'EOF' ### BEGIN INIT INFO # Provides: sendsigs # Required-Start: # Required-Stop: umountnfs # Default-Start: # Default-Stop: 0 6 # Short-Description: Kill all remaining processes. # Description: ### END INIT INFO EOF addscript single <<'EOF' ### BEGIN INIT INFO # Provides: single # Required-Start: $local_fs $all killprocs # Required-Stop: # Default-Start: 1 # Default-Stop: # Short-Description: executed by init(8) upon entering runlevel 1 (single). ### END INIT INFO EOF addscript stop-bootlogd <<'EOF' ### BEGIN INIT INFO # Provides: stop-bootlogd # Required-Start: $local_fs $all # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Stop bootlogd # Description: See the init.d/bootlogd script ### END INIT INFO EOF addscript stop-bootlogd-single <<'EOF' ### BEGIN INIT INFO # Provides: stop-bootlogd-single # Required-Start: $local_fs $all # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: Stop bootlogd in single user mode # Description: See the init.d/bootlogd script ### END INIT INFO EOF addscript sudo <<'EOF' ### BEGIN INIT INFO # Provides: sudo # Required-Start: $local_fs $remote_fs # Required-Stop: # X-Start-Before: rmnologin # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Provide limited super user privileges to specific users # Description: Provide limited super user privileges to specific users. ### END INIT INFO EOF addscript udev <<'EOF' ### BEGIN INIT INFO # Provides: udev # Required-Start: mountkernfs # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: Start udevd, populate /dev and load drivers. ### END INIT INFO EOF addscript udev-mtab <<'EOF' ### BEGIN INIT INFO # Provides: udev-mtab # Required-Start: udev $local_fs # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: Add to mtab the entry for /dev. ### END INIT INFO EOF addscript umountfs <<'EOF' ### BEGIN INIT INFO # Provides: umountfs # Required-Start: # Required-Stop: umountroot # Default-Start: # Default-Stop: 0 6 # Short-Description: Turn off swap and unmount all local file systems. # Description: ### END INIT INFO EOF addscript umountnfs.sh <<'EOF' ### BEGIN INIT INFO # Provides: umountnfs # Required-Start: # Required-Stop: umountfs # Should-Stop: $network $portmap nfs-common # Default-Start: # Default-Stop: 0 6 # Short-Description: Unmount all network filesystems except the root fs. # Description: Also unmounts all virtual filesystems (proc, # devpts, usbfs, sysfs) that are not mounted at the # top level. ### END INIT INFO EOF addscript umountroot <<'EOF' ### BEGIN INIT INFO # Provides: umountroot # Required-Start: # Required-Stop: # Should-Stop: halt reboot kexec # Default-Start: # Default-Stop: 0 6 # Short-Description: Mount the root filesystem read-only. ### END INIT INFO EOF addscript urandom <<'EOF' ### BEGIN INIT INFO # Provides: urandom # Required-Start: $local_fs $time # Required-Stop: $local_fs # Default-Start: S # Default-Stop: 0 6 # Short-Description: Save and restore random seed between restarts. # Description: This script saves the random seed between restarts. # It is called from the boot, halt and reboot scripts. ### END INIT INFO EOF addscript wicd <<'EOF' ### BEGIN INIT INFO # Provides: wicd # Required-Start: $remote_fs dbus # Required-Stop: $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts and stops Wicd # Description: Starts and stops Wicd, a network manager ### END INIT INFO EOF addscript x11-common <<'EOF' ### BEGIN INIT INFO # Provides: x11-common # Required-Start: $remote_fs # Required-Stop: $remote_fs # Default-Start: S # Default-Stop: ### END INIT INFO EOF addscript xinetd <<'EOF' ### BEGIN INIT INFO # Provides: xinetd inetd # Required-Start: $local_fs $remote_fs $network # Required-Stop: $local_fs $remote_fs $network # Should-Start: $syslog # Should-Stop: $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts or stops the xinetd daemon. # Description: Starts and stops xinetd, an inetd replacement ### END INIT INFO EOF cd $tmpdir/etc mkdir rc0.d rc1.d rc2.d rc3.d rc4.d rc5.d rc6.d rcS.d ln -s ../init.d/alsa-utils rc0.d/K01alsa-utils ln -s ../init.d/avahi-daemon rc0.d/K01avahi-daemon ln -s ../init.d/kdm rc0.d/K01kdm ln -s ../init.d/miredo rc0.d/K01miredo ln -s ../init.d/postfix rc0.d/K01postfix ln -s ../init.d/urandom rc0.d/K01urandom ln -s ../init.d/wicd rc0.d/K01wicd ln -s ../init.d/xinetd rc0.d/K01xinetd ln -s ../init.d/dnsmasq rc0.d/K02dnsmasq ln -s ../init.d/sendsigs rc0.d/K03sendsigs ln -s ../init.d/rsyslog rc0.d/K04rsyslog ln -s ../init.d/hwclock.sh rc0.d/K05hwclock.sh ln -s ../init.d/umountnfs.sh rc0.d/K05umountnfs.sh ln -s ../init.d/networking rc0.d/K06networking ln -s ../init.d/umountfs rc0.d/K07umountfs ln -s ../init.d/umountroot rc0.d/K08umountroot ln -s ../init.d/halt rc0.d/K09halt ln -s ../init.d/alsa-utils rc1.d/K01alsa-utils ln -s ../init.d/avahi-daemon rc1.d/K01avahi-daemon ln -s ../init.d/kdm rc1.d/K01kdm ln -s ../init.d/miredo rc1.d/K01miredo ln -s ../init.d/postfix rc1.d/K01postfix ln -s ../init.d/wicd rc1.d/K01wicd ln -s ../init.d/xinetd rc1.d/K01xinetd ln -s ../init.d/dnsmasq rc1.d/K02dnsmasq ln -s ../init.d/rsyslog rc1.d/K04rsyslog ln -s ../init.d/killprocs rc1.d/S01killprocs ln -s ../init.d/motd rc1.d/S01motd ln -s ../init.d/bootlogs rc1.d/S04bootlogs ln -s ../init.d/single rc1.d/S05single ln -s ../init.d/motd rc2.d/S01motd ln -s ../init.d/rsyslog rc2.d/S01rsyslog ln -s ../init.d/sudo rc2.d/S01sudo ln -s ../init.d/acpid rc2.d/S02acpid ln -s ../init.d/dbus rc2.d/S02dbus ln -s ../init.d/dnsmasq rc2.d/S02dnsmasq ln -s ../init.d/loadcpufreq rc2.d/S02loadcpufreq ln -s ../init.d/miredo rc2.d/S02miredo ln -s ../init.d/xinetd rc2.d/S02xinetd ln -s ../init.d/avahi-daemon rc2.d/S03avahi-daemon ln -s ../init.d/cpufrequtils rc2.d/S03cpufrequtils ln -s ../init.d/cron rc2.d/S03cron ln -s ../init.d/kdm rc2.d/S03kdm ln -s ../init.d/postfix rc2.d/S03postfix ln -s ../init.d/rsync rc2.d/S03rsync ln -s ../init.d/wicd rc2.d/S03wicd ln -s ../init.d/bootlogs rc2.d/S04bootlogs ln -s ../init.d/fetchmail rc2.d/S04fetchmail ln -s ../init.d/rc.local rc2.d/S05rc.local ln -s ../init.d/rmnologin rc2.d/S05rmnologin ln -s ../init.d/stop-bootlogd rc2.d/S05stop-bootlogd ln -s ../init.d/motd rc3.d/S01motd ln -s ../init.d/rsyslog rc3.d/S01rsyslog ln -s ../init.d/sudo rc3.d/S01sudo ln -s ../init.d/acpid rc3.d/S02acpid ln -s ../init.d/dbus rc3.d/S02dbus ln -s ../init.d/dnsmasq rc3.d/S02dnsmasq ln -s ../init.d/loadcpufreq rc3.d/S02loadcpufreq ln -s ../init.d/miredo rc3.d/S02miredo ln -s ../init.d/xinetd rc3.d/S02xinetd ln -s ../init.d/avahi-daemon rc3.d/S03avahi-daemon ln -s ../init.d/cpufrequtils rc3.d/S03cpufrequtils ln -s ../init.d/cron rc3.d/S03cron ln -s ../init.d/kdm rc3.d/S03kdm ln -s ../init.d/postfix rc3.d/S03postfix ln -s ../init.d/rsync rc3.d/S03rsync ln -s ../init.d/wicd rc3.d/S03wicd ln -s ../init.d/bootlogs rc3.d/S04bootlogs ln -s ../init.d/fetchmail rc3.d/S04fetchmail ln -s ../init.d/rc.local rc3.d/S05rc.local ln -s ../init.d/rmnologin rc3.d/S05rmnologin ln -s ../init.d/stop-bootlogd rc3.d/S05stop-bootlogd ln -s ../init.d/motd rc4.d/S01motd ln -s ../init.d/rsyslog rc4.d/S01rsyslog ln -s ../init.d/sudo rc4.d/S01sudo ln -s ../init.d/acpid rc4.d/S02acpid ln -s ../init.d/dbus rc4.d/S02dbus ln -s ../init.d/dnsmasq rc4.d/S02dnsmasq ln -s ../init.d/loadcpufreq rc4.d/S02loadcpufreq ln -s ../init.d/miredo rc4.d/S02miredo ln -s ../init.d/xinetd rc4.d/S02xinetd ln -s ../init.d/avahi-daemon rc4.d/S03avahi-daemon ln -s ../init.d/cpufrequtils rc4.d/S03cpufrequtils ln -s ../init.d/cron rc4.d/S03cron ln -s ../init.d/kdm rc4.d/S03kdm ln -s ../init.d/postfix rc4.d/S03postfix ln -s ../init.d/rsync rc4.d/S03rsync ln -s ../init.d/wicd rc4.d/S03wicd ln -s ../init.d/bootlogs rc4.d/S04bootlogs ln -s ../init.d/fetchmail rc4.d/S04fetchmail ln -s ../init.d/rc.local rc4.d/S05rc.local ln -s ../init.d/rmnologin rc4.d/S05rmnologin ln -s ../init.d/stop-bootlogd rc4.d/S05stop-bootlogd ln -s ../init.d/motd rc5.d/S01motd ln -s ../init.d/rsyslog rc5.d/S01rsyslog ln -s ../init.d/sudo rc5.d/S01sudo ln -s ../init.d/acpid rc5.d/S02acpid ln -s ../init.d/dbus rc5.d/S02dbus ln -s ../init.d/dnsmasq rc5.d/S02dnsmasq ln -s ../init.d/loadcpufreq rc5.d/S02loadcpufreq ln -s ../init.d/miredo rc5.d/S02miredo ln -s ../init.d/xinetd rc5.d/S02xinetd ln -s ../init.d/avahi-daemon rc5.d/S03avahi-daemon ln -s ../init.d/cpufrequtils rc5.d/S03cpufrequtils ln -s ../init.d/cron rc5.d/S03cron ln -s ../init.d/kdm rc5.d/S03kdm ln -s ../init.d/postfix rc5.d/S03postfix ln -s ../init.d/rsync rc5.d/S03rsync ln -s ../init.d/wicd rc5.d/S03wicd ln -s ../init.d/bootlogs rc5.d/S04bootlogs ln -s ../init.d/fetchmail rc5.d/S04fetchmail ln -s ../init.d/rc.local rc5.d/S05rc.local ln -s ../init.d/rmnologin rc5.d/S05rmnologin ln -s ../init.d/stop-bootlogd rc5.d/S05stop-bootlogd ln -s ../init.d/alsa-utils rc6.d/K01alsa-utils ln -s ../init.d/avahi-daemon rc6.d/K01avahi-daemon ln -s ../init.d/kdm rc6.d/K01kdm ln -s ../init.d/miredo rc6.d/K01miredo ln -s ../init.d/postfix rc6.d/K01postfix ln -s ../init.d/urandom rc6.d/K01urandom ln -s ../init.d/wicd rc6.d/K01wicd ln -s ../init.d/xinetd rc6.d/K01xinetd ln -s ../init.d/dnsmasq rc6.d/K02dnsmasq ln -s ../init.d/sendsigs rc6.d/K03sendsigs ln -s ../init.d/rsyslog rc6.d/K04rsyslog ln -s ../init.d/hwclock.sh rc6.d/K05hwclock.sh ln -s ../init.d/umountnfs.sh rc6.d/K05umountnfs.sh ln -s ../init.d/networking rc6.d/K06networking ln -s ../init.d/umountfs rc6.d/K07umountfs ln -s ../init.d/umountroot rc6.d/K08umountroot ln -s ../init.d/reboot rc6.d/K09reboot ln -s ../init.d/mountkernfs.sh rcS.d/S01mountkernfs.sh ln -s ../init.d/udev rcS.d/S02udev ln -s ../init.d/mountdevsubfs.sh rcS.d/S03mountdevsubfs.sh ln -s ../init.d/bootlogd rcS.d/S04bootlogd ln -s ../init.d/keyboard-setup rcS.d/S05keyboard-setup ln -s ../init.d/hostname.sh rcS.d/S06hostname.sh ln -s ../init.d/hwclock.sh rcS.d/S06hwclock.sh ln -s ../init.d/checkroot.sh rcS.d/S07checkroot.sh ln -s ../init.d/checkroot-bootclean.sh rcS.d/S08checkroot-bootclean.sh ln -s ../init.d/kmod rcS.d/S08kmod ln -s ../init.d/mtab.sh rcS.d/S08mtab.sh ln -s ../init.d/checkfs.sh rcS.d/S09checkfs.sh ln -s ../init.d/mountall.sh rcS.d/S10mountall.sh ln -s ../init.d/mountall-bootclean.sh rcS.d/S11mountall-bootclean.sh ln -s ../init.d/procps rcS.d/S11procps ln -s ../init.d/udev-mtab rcS.d/S11udev-mtab ln -s ../init.d/urandom rcS.d/S11urandom ln -s ../init.d/networking rcS.d/S12networking ln -s ../init.d/mountnfs.sh rcS.d/S13mountnfs.sh ln -s ../init.d/mountnfs-bootclean.sh rcS.d/S14mountnfs-bootclean.sh ln -s ../init.d/kbd rcS.d/S15kbd ln -s ../init.d/console-setup rcS.d/S16console-setup ln -s ../init.d/alsa-utils rcS.d/S17alsa-utils ln -s ../init.d/bootmisc.sh rcS.d/S17bootmisc.sh ln -s ../init.d/screen-cleanup rcS.d/S17screen-cleanup ln -s ../init.d/x11-common rcS.d/S17x11-common ln -s ../init.d/stop-bootlogd-single rcS.d/S18stop-bootlogd-single list_rclinks
_______________________________________________ Pkg-sysvinit-devel mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-sysvinit-devel
