On 29.01.2013 23:24, Andreas Stempfhuber wrote: > I have newly installed Wheezy and the network manager is not able to connect > to > the network using the following Cardbus PCMCIA ethernet card: > > 06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03) > Subsystem: Xircom RealPort2 CardBus Ethernet 10/100 (R2BE-100) > Flags: bus master, medium devsel, latency 64, IRQ 9 > I/O ports at 2000 [size=128] > Memory at 18000000 (32-bit, non-prefetchable) [size=2K] > Memory at 18000800 (32-bit, non-prefetchable) [size=2K] > [virtual] Expansion ROM at 1c000000 [disabled] [size=16K] > Capabilities: [dc] Power Management version 2 > Kernel driver in use: xircom_cb > > The interface worked during the installation and bringing the interface up > manually using
What's the content of /etc/network/interfaces? Devices listed in there will not be managed by NM (to avoid stomping over a ifupdown configure interface). Michael -- Why is it that all of the instruments seeking intelligent life in the universe are pointed away from Earth?
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Pkg-utopia-maintainers mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-utopia-maintainers
