Your message dated Fri, 24 May 2013 07:30:49 +0000 with message-id <[email protected]> and subject line Bug#709536: Removed package(s) from unstable has caused the Debian Bug report #648553, regarding xfce4-utils: runs xrdb -merge with the -nocpp option to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 648553: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=648553 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: xfce4-utils Version: 4.8.3-1 Severity: normal I just switched from GNOME to Xfce and discovered that all of my xterms were using a microfont. It took a bit of tracking down, but this was because .Xresources wasn't being run through the preprocessor, so the xterm font was being set to the literal value of the preprocessor define I was using instead of the actual font, and then falling back on fixed. The standard Debian /etc/X11/Xsession.d/30x11-common_xresources file runs xrdb normally, but /etc/xdg/xfce4/xinitrc explicitly passes in -nocpp. Is there some reason for this? Would it be possible to remove that flag? It's somewhat surprising, since Xresources has always been run through the preprocessor for as long as I've been using X (nearly twenty years now). Attached to the bug report is my modified xinitrc, since reportbug wanted to include it, but the change is trivial and obvious. Google seems to indicate that Gentoo is also patching for this. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.0.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xfce4-utils depends on: ii exo-utils 0.6.2-3 ii libc6 2.13-21 ii libdbus-1-3 1.4.16-1 ii libdbus-glib-1-2 0.98-1 ii libglib2.0-0 2.28.8-1 ii libgtk2.0-0 2.24.7-1 ii libxfce4ui-1-0 4.8.0-3 ii libxfce4util4 4.8.2-1 ii procps 1:3.2.8-11 ii x11-xserver-utils 7.6+3 ii xinit 1.3.1-1 ii xterm [x-terminal-emulator] 276-1 Versions of packages xfce4-utils recommends: ii dbus-x11 1.4.16-1 ii thunar 1.2.3-2 ii xdg-user-dirs 0.14-1 ii xfce4-panel 4.8.6-1 ii xfwm4 4.8.2-1 ii xinput 1.5.3-1 ii xscreensaver 5.15-2 Versions of packages xfce4-utils suggests: ii xfce4-session 4.8.2-1 -- Configuration Files: /etc/xdg/xfce4/xinitrc changed: if test "x$UID" = "x"; then if test -x /usr/xpg4/bin/id; then UID=`/usr/xpg4/bin/id -u`; else UID=`id -u`; fi fi if test "x$XDG_MENU_PREFIX" = "x"; then XDG_MENU_PREFIX="xfce-" export XDG_MENU_PREFIX fi if test "x$DESKTOP_SESSION" = "x"; then DESKTOP_SESSION="xfce" export DESKTOP_SESSION fi if test "x$XDG_CONFIG_HOME" = "x" ; then XDG_CONFIG_HOME=$HOME/.config fi [ -d "$XDG_CONFIG_HOME" ] || mkdir "$XDG_CONFIG_HOME" if test "x$XDG_CACHE_HOME" = "x" ; then XDG_CACHE_HOME=$HOME/.cache fi [ -d "$XDG_CACHE_HOME" ] || mkdir "$XDG_CACHE_HOME" if which xdg-user-dirs-update >/dev/null 2>&1; then xdg-user-dirs-update fi if test -f "$XDG_CONFIG_HOME/user-dirs.dirs"; then . "$XDG_CONFIG_HOME/user-dirs.dirs" # i'm deliberately not 'export'-ing the XDG_ vars, because you shouldn't # rely on the env vars inside apps, since the file could be changed at # any time by the user. this is solely here for migration purposes. # a bit of user dir migration... if test -d "$HOME/Desktop" -a ! -L "$HOME/Desktop" \ -a "$XDG_DESKTOP_DIR" \ -a "$HOME/Desktop" != "$XDG_DESKTOP_DIR" then echo "Migrating $HOME/Desktop to $XDG_DESKTOP_DIR..." test -d "$XDG_DESKTOP_DIR" && rmdir "$XDG_DESKTOP_DIR" mv "$HOME/Desktop" "$XDG_DESKTOP_DIR" || echo "Desktop migration failed" >&2 fi if test -d "$HOME/Templates" -a ! -L "$HOME/Templates" \ -a "$XDG_TEMPLATES_DIR" \ -a "$HOME/Templates" != "$XDG_TEMPLATES_DIR" then echo "Migrating $HOME/Templates to $XDG_TEMPLATES_DIR..." test -d "$XDG_TEMPLATES_DIR" && rmdir "$XDG_TEMPLATES_DIR" mv "$HOME/Templates" "$XDG_TEMPLATES_DIR" || echo "Templates migration failed" >&2 fi fi LIBGLADE_MODULE_PATH="$LIBGLADE_MODULE_PATH:" GLADE_CATALOG_PATH="$GLADE_CATALOG_PATH:" GLADE_PIXMAP_PATH="$GLADE_PIXMAP_PATH:" GLADE_MODULE_PATH="$GLADE_MODULE_PATH:" export LIBGLADE_MODULE_PATH export GLADE_CATALOG_PATH export GLADE_PIXMAP_PATH export GLADE_MODULE_PATH XRESOURCES="" test -r "/etc/xdg/xfce4/Xft.xrdb" && XRESOURCES="$XRESOURCES /etc/xdg/xfce4/Xft.xrdb" test -r $HOME/.Xdefaults && XRESOURCES="$XRESOURCES $HOME/.Xdefaults" BASEDIR=$XDG_CONFIG_HOME/xfce4 if test -r "$BASEDIR/Xft.xrdb"; then XRESOURCES="$XRESOURCES $BASEDIR/Xft.xrdb" elif test -r "$XFCE4HOME/Xft.xrdb"; then mkdir -p "$BASEDIR" cp "$XFCE4HOME/Xft.xrdb" "$BASEDIR"/ XRESOURCES="$XRESOURCES $BASEDIR/Xft.xrdb" fi test -r "$BASEDIR/Xcursor.xrdb" && XRESOURCES="$XRESOURCES $BASEDIR/Xcursor.xrdb" test -r "$HOME/.Xresources" && XRESOURCES="$XRESOURCES $HOME/.Xresources" cat /dev/null $XRESOURCES | xrdb -merge - test -r $HOME/.Xmodmap && xmodmap $HOME/.Xmodmap if test x"$DBUS_SESSION_BUS_ADDRESS" = x""; then if which dbus-launch >/dev/null 2>&1; then eval `dbus-launch --sh-syntax --exit-with-session` # some older versions of dbus don't export the var properly export DBUS_SESSION_BUS_ADDRESS else echo "Could not find dbus-launch; Xfce will not work properly" >&2 fi fi ssh_agent_enabled=`xfconf-query -c xfce4-session -p /startup/ssh-agent/enabled 2> /dev/null` if test "$ssh_agent_enabled" != "false"; then # if the user has pam_ssh installed, it will start ssh-agent for us, but # of course won't start gpg-agent. so, if ssh-agent is already running, # but we want gpg-agent (and that's not running yet) start gpg-agent # without ssh support ssh_agent_type=`xfconf-query -c xfce4-session -p /startup/ssh-agent/type 2> /dev/null` if test -z "$ssh_agent_type"; then if which gpg-agent >/dev/null 2>&1; then ssh_agent_type=gpg-agent else ssh_agent_type=ssh-agent fi fi # ignore stale ssh-agents if test "$SSH_AGENT_PID"; then if ! kill -0 $SSH_AGENT_PID; then unset SSH_AGENT_PID unset SSH_AUTH_SOCK fi fi case "$ssh_agent_type" in gpg-agent) if test -z "$SSH_AGENT_PID"; then eval `gpg-agent --daemon --enable-ssh-support --write-env-file $XDG_CACHE_HOME/gpg-agent-info` ssh_agent_kill_cmd="kill -INT $SSH_AGENT_PID; rm -f $XDG_CACHE_HOME/gpg-agent-info" elif test -z "$GPG_AGENT_INFO"; then echo "ssh-agent is already running; starting gpg-agent without ssh support" eval `gpg-agent --daemon --write-env-file $XDG_CACHE_HOME/gpg-agent-info` ssh_agent_kill_cmd="pkill -INT ^gpg-agent\$; rm -f $XDG_CACHE_HOME/gpg-agent-info" else echo "gpg-agent is already running" fi ;; ssh-agent) if test -z "$SSH_AGENT_PID"; then eval `ssh-agent -s` ssh_agent_kill_cmd="ssh-agent -s -k" else echo "ssh-agent is already running" fi ;; *) echo "Unrecognized agent type '$ssh_agent_type'" >&2 ;; esac fi screensaver_enabled=`xfconf-query -c xfce4-session -p /startup/screensaver/enabled 2> /dev/null` if test $UID -gt 0 -a -z "$VNCSESSION" -a "$screensaver_enabled" != "false"; then screensaver_type=`xfconf-query -c xfce4-session -p /startup/screensaver/type 2> /dev/null` case "$screensaver_type" in xscreensaver) xscreensaver -no-splash & ;; gnome-screensaver) gnome-screensaver & ;; *) if test x"`which xscreensaver 2>/dev/null`" != x""; then xscreensaver -no-splash & elif test x"`which gnome-screensaver 2>/dev/null`" != x""; then gnome-screensaver & fi ;; esac fi if which xfce4-session >/dev/null 2>&1; then xfce4-session if test "$ssh_agent_kill_cmd"; then echo "running '$ssh_agent_kill_cmd'" eval "$ssh_agent_kill_cmd" fi exit 0 fi xsetroot -solid black -cursor_name watch xfsettingsd & xfwm4 --daemon if test -d "$XDG_CONFIG_HOME/autostart"; then for i in ${XDG_CONFIG_HOME}/autostart/*.desktop; do grep -q -E "^Hidden=true" "$i" && continue if grep -q -E "^OnlyShowIn=" "$i"; then # need to test twice, as lack of the line entirely means we still run it grep -E "^OnlyShowIn=" "$i" | grep -q 'XFCE;' || continue fi grep -E "^NotShowIn=" "$i" | grep -q 'XFCE;' && continue # check for TryExec trycmd=`grep -E "^TryExec=" "$i" | cut -d'=' -f2` if test "$trycmd"; then which "$trycmd" >/dev/null 2>&1 || continue fi cmd=`grep -E "^Exec=" "$i" | cut -d'=' -f2` if test "$cmd" && which "$cmd" >/dev/null 2>&1; then $cmd & fi done elif test -d "$HOME/Desktop/Autostart"; then for i in `ls -1 -L ${HOME}/Desktop/Autostart/ 2>/dev/null`; do if test -x $HOME/Desktop/Autostart/$i; then $HOME/Desktop/Autostart/$i & fi done fi xfdesktop& orage & panel=`which xfce4-panel` case "x$panel" in x|xno*) ;; *) $panel ret=$? while test $ret -ne 0; do xmessage -center -file - -timeout 20 -title Error <<EOF A crash occured in the panel Please report this to the [email protected] list or on http://bugs.xfce.org Meanwhile the panel will be restarted EOF cat >&2 <<EOF A crash occured in the panel Please report this to the [email protected] list or on http://bugs.xfce.org Meanwhile the panel will be restarted EOF $panel ret=$? done ;; esac if test "$ssh_agent_kill_cmd"; then eval "$ssh_agent_kill_cmd" fi xsetroot -bg white -fg red -solid black -cursor_name watch -- no debconf information
--- End Message ---
--- Begin Message ---Version: 4.8.3-2+rm Dear submitter, as the package xfce4-utils has just been removed from the Debian archive unstable we hereby close the associated bug reports. We are sorry that we couldn't deal with your issue properly. For details on the removal, please see http://bugs.debian.org/709536 The version of this package that was in Debian prior to this removal can still be found using http://snapshot.debian.org/. This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing [email protected]. Debian distribution maintenance software pp. Ansgar Burchardt (the ftpmaster behind the curtain)
--- End Message ---
_______________________________________________ Pkg-xfce-devel mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-xfce-devel
