Package: lightdm-gtk-greeter
Version: 2.0.1-2
Severity: important

Dear Maintainer,

I started my system yesterday with no problems. Shortly afterwards I brought my packages up to date using Aptitude. I then rebooted and all I get now is a black screen instead of the GUI.

I am reporting it against this package because of the line last but one in dmesg: traps: lightdm-gtk-gre[1888] trap int3 ip:7fdff3bf1101 sp:7ffec0cc33f0 error:0

However, this was not one of the packages that were upgraded. These are the packages that were:

Aptitude 0.8.3: log report
Wed, Sep 14 2016 03:56:33 +0100

  IMPORTANT: this log only lists intended actions; actions which fail
  due to dpkg problems may not be completed.

Will install 208 packages, and remove 2 packages.
30.9 MB of disk space will be used
========================================
[REMOVE, NOT USED] libchromaprint0:amd64 1.3-1+b1
[REMOVE, NOT USED] libx265-79:amd64 1.9-3
[INSTALL, DEPENDENCIES] fonts-crosextra-caladea:amd64 20130214-1
[INSTALL, DEPENDENCIES] fonts-crosextra-carlito:amd64 20130920-1
[INSTALL, DEPENDENCIES] fonts-linuxlibertine:amd64 5.3.0-2
[INSTALL, DEPENDENCIES] libchromaprint1:amd64 1.3.2-2
[INSTALL, DEPENDENCIES] libvpx4:amd64 1.6.0-2
[INSTALL, DEPENDENCIES] libx265-87:amd64 2.0-4
[UPGRADE] adwaita-icon-theme:amd64 3.20-3 -> 3.21.91-1
[UPGRADE] apt:amd64 1.3~rc2 -> 1.3~rc4
[UPGRADE] apt-utils:amd64 1.3~rc2 -> 1.3~rc4
[UPGRADE] clamav:amd64 0.99.2+dfsg-2 -> 0.99.2+dfsg-3
[UPGRADE] clamav-base:amd64 0.99.2+dfsg-2 -> 0.99.2+dfsg-3
[UPGRADE] clamav-daemon:amd64 0.99.2+dfsg-2 -> 0.99.2+dfsg-3
[UPGRADE] clamav-freshclam:amd64 0.99.2+dfsg-2 -> 0.99.2+dfsg-3
[UPGRADE] clamdscan:amd64 0.99.2+dfsg-2 -> 0.99.2+dfsg-3
[UPGRADE] clamtk:amd64 5.20-1 -> 5.21-1
[UPGRADE] coinor-libclp1:amd64 1.15.10-1+b1 -> 1.15.10-3
[UPGRADE] coinor-libcoinutils3v5:amd64 2.9.15-3.1 -> 2.9.15-4
[UPGRADE] colord:amd64 1.3.2-1 -> 1.3.3-2
[UPGRADE] colord-data:amd64 1.3.2-1 -> 1.3.3-2
[UPGRADE] dictionaries-common:amd64 1.27.0 -> 1.27.1
[UPGRADE] diffutils:amd64 1:3.3-3 -> 1:3.5-1
[UPGRADE] dmidecode:amd64 3.0-3 -> 3.0-4
[UPGRADE] docbook-xml:amd64 4.5-7.3 -> 4.5-8
[UPGRADE] docbook-xsl:amd64 1.79.1+dfsg-1 -> 1.79.1+dfsg-2
[UPGRADE] evince:amd64 3.20.1-1 -> 3.21.4-1
[UPGRADE] evince-common:amd64 3.20.1-1 -> 3.21.4-1
[UPGRADE] fonts-liberation:amd64 2.00.1-2 -> 1:1.07.4-2
[UPGRADE] fonts-opensymbol:amd64 2:102.7+LibO5.2.0-2 -> 2:102.7+LibO5.2.1-1
[UPGRADE] gir1.2-atk-1.0:amd64 2.20.0-1 -> 2.21.90-2
[UPGRADE] gir1.2-freedesktop:amd64 1.48.0-3 -> 1.49.1-2
[UPGRADE] gir1.2-glib-2.0:amd64 1.48.0-3 -> 1.49.1-2
[UPGRADE] gir1.2-gtk-3.0:amd64 3.20.9-1 -> 3.21.5-3
[UPGRADE] gir1.2-pango-1.0:amd64 1.40.1-1 -> 1.40.2-1
[UPGRADE] glib-networking:amd64 2.48.2-1 -> 2.49.90-1
[UPGRADE] glib-networking-common:amd64 2.48.2-1 -> 2.49.90-1
[UPGRADE] glib-networking-services:amd64 2.48.2-1 -> 2.49.90-1
[UPGRADE] gnome-desktop3-data:amd64 3.20.2-1 -> 3.21.90-3
[UPGRADE] gnome-keyring:amd64 3.20.0-1 -> 3.20.0-3
[UPGRADE] gnome-logs:amd64 3.20.1-1 -> 3.21.90-1
[UPGRADE] gsettings-desktop-schemas:amd64 3.20.0-3 -> 3.21.4-2
[UPGRADE] gsfonts:amd64 1:8.11+urwcyr1.0.7~pre44-4.2 -> 1:8.11+urwcyr1.0.7~pre44-4.3
[UPGRADE] gstreamer1.0-plugins-good:amd64 1.8.3-1 -> 1.8.3-1+b1
[UPGRADE] gtk-update-icon-cache:amd64 3.20.9-1 -> 3.21.5-3
[UPGRADE] gvfs:amd64 1.28.3-1 -> 1.29.91-1
[UPGRADE] gvfs-backends:amd64 1.28.3-1 -> 1.29.91-1
[UPGRADE] gvfs-common:amd64 1.28.3-1 -> 1.29.91-1
[UPGRADE] gvfs-daemons:amd64 1.28.3-1 -> 1.29.91-1
[UPGRADE] gvfs-libs:amd64 1.28.3-1 -> 1.29.91-1
[UPGRADE] hunspell-en-gb:amd64 1:5.2.0-1 -> 1:5.2.1-1
[UPGRADE] hunspell-hu:amd64 1:5.2.0-1 -> 1:5.2.1-1
[UPGRADE] hwinfo:amd64 21.27-1 -> 21.30-1
[UPGRADE] i965-va-driver:amd64 1.7.1-1 -> 1.7.2-1
[UPGRADE] icedove:amd64 1:45.2.0-4 -> 1:45.2.0-4+b1
[UPGRADE] iceowl-extension:amd64 1:45.2.0-4 -> 1:45.2.0-4+b1
[UPGRADE] inkscape:amd64 0.91-9+b1 -> 0.91-10
[UPGRADE] iso-codes:amd64 3.69-1 -> 3.70-1
[UPGRADE] krb5-locales:amd64 1.14.3+dfsg-1 -> 1.14.3+dfsg-2
[UPGRADE] libapt-inst2.0:amd64 1.3~rc2 -> 1.3~rc4
[UPGRADE] libapt-pkg5.0:amd64 1.3~rc2 -> 1.3~rc4
[UPGRADE] libatk-bridge2.0-0:amd64 2.20.1-3 -> 2.20.1-4
[UPGRADE] libatk-wrapper-java:amd64 0.33.3-8 -> 0.33.3-9
[UPGRADE] libatk-wrapper-java-jni:amd64 0.33.3-8 -> 0.33.3-9
[UPGRADE] libatk1.0-0:amd64 2.20.0-1 -> 2.21.90-2
[UPGRADE] libatk1.0-data:amd64 2.20.0-1 -> 2.21.90-2
[UPGRADE] libavcodec57:amd64 7:3.1.2-1 -> 7:3.1.3-1+b3
[UPGRADE] libavfilter6:amd64 7:3.1.2-1 -> 7:3.1.3-1+b3
[UPGRADE] libavformat57:amd64 7:3.1.2-1 -> 7:3.1.3-1+b3
[UPGRADE] libavresample3:amd64 7:3.1.2-1 -> 7:3.1.3-1+b3
[UPGRADE] libavutil55:amd64 7:3.1.2-1 -> 7:3.1.3-1+b3
[UPGRADE] libbasicusageenvironment1:amd64 2016.08.07-1 -> 2016.08.27-1
[UPGRADE] libclamav7:amd64 0.99.2+dfsg-2 -> 0.99.2+dfsg-3
[UPGRADE] libclutter-gtk-1.0-0:amd64 1.8.0-1 -> 1.8.0-2
[UPGRADE] libcogl-pango20:amd64 1.22.0-2 -> 1.22.2-2
[UPGRADE] libcogl-path20:amd64 1.22.0-2 -> 1.22.2-2
[UPGRADE] libcogl20:amd64 1.22.0-2 -> 1.22.2-2
[UPGRADE] libcolord2:amd64 1.3.2-1 -> 1.3.3-2
[UPGRADE] libcolorhug2:amd64 1.3.2-1 -> 1.3.3-2
[UPGRADE] libegl1-mesa:amd64 11.2.2-1 -> 12.0.2-1
[UPGRADE] libevdev2:amd64 1.5.2+dfsg-1 -> 1.5.4+dfsg-1
[UPGRADE] libevdocument3-4:amd64 3.20.1-1 -> 3.21.4-1
[UPGRADE] libevview3-3:amd64 3.20.1-1 -> 3.21.4-1
[UPGRADE] libflite1:amd64 2.0.0-release-1+b1 -> 2.0.0-release-2
[UPGRADE] libgbm1:amd64 11.2.2-1 -> 12.0.2-1
[UPGRADE] libgeoip1:amd64 1.6.9-2 -> 1.6.9-3
[UPGRADE] libgirepository-1.0-1:amd64 1.48.0-3 -> 1.49.1-2
[UPGRADE] libgl1-mesa-dri:amd64 11.2.2-1 -> 12.0.2-1
[UPGRADE] libgl1-mesa-glx:amd64 11.2.2-1 -> 12.0.2-1
[UPGRADE] libglapi-mesa:amd64 11.2.2-1 -> 12.0.2-1
[UPGRADE] libgles1-mesa:amd64 11.2.2-1 -> 12.0.2-1
[UPGRADE] libgles2-mesa:amd64 11.2.2-1 -> 12.0.2-1
[UPGRADE] libglib2.0-0:amd64 2.48.1-3 -> 2.49.6-1
[UPGRADE] libglib2.0-data:amd64 2.48.1-3 -> 2.49.6-1
[UPGRADE] libgnome-desktop-3-12:amd64 3.20.2-1 -> 3.21.90-3
[UPGRADE] libgnutls30:amd64 3.5.3-3 -> 3.5.3-4
[UPGRADE] libgoa-1.0-0b:amd64 3.20.3-1 -> 3.21.91-1
[UPGRADE] libgoa-1.0-common:amd64 3.20.3-1 -> 3.21.91-1
[UPGRADE] libgroupsock8:amd64 2016.08.07-1 -> 2016.08.27-1
[UPGRADE] libgssapi-krb5-2:amd64 1.14.3+dfsg-1 -> 1.14.3+dfsg-2
[UPGRADE] libgtk-3-0:amd64 3.20.9-1 -> 3.21.5-3
[UPGRADE] libgtk-3-bin:amd64 3.20.9-1 -> 3.21.5-3
[UPGRADE] libgtk-3-common:amd64 3.20.9-1 -> 3.21.5-3
[UPGRADE] libgtop-2.0-10:amd64 2.34.0-1 -> 2.34.1-2
[UPGRADE] libgtop2-common:amd64 2.34.0-1 -> 2.34.1-2
[UPGRADE] libhd21:amd64 21.27-1 -> 21.30-1
[UPGRADE] libicu57:amd64 57.1-3 -> 57.1-4
[UPGRADE] libimage-exiftool-perl:amd64 10.23-1 -> 10.25-1
[UPGRADE] libjavascriptcoregtk-4.0-18:amd64 2.12.3-1+b2 -> 2.12.5-1
[UPGRADE] libjson-c3:amd64 0.12-3 -> 0.12.1-1
[UPGRADE] libk5crypto3:amd64 1.14.3+dfsg-1 -> 1.14.3+dfsg-2
[UPGRADE] libkrb5-3:amd64 1.14.3+dfsg-1 -> 1.14.3+dfsg-2
[UPGRADE] libkrb5support0:amd64 1.14.3+dfsg-1 -> 1.14.3+dfsg-2
[UPGRADE] libksba8:amd64 1.3.4-4 -> 1.3.5-2
[UPGRADE] liblivemedia52:amd64 2016.08.07-1 -> 2016.08.27-1
[UPGRADE] liblouisutdml-bin:amd64 2.6.0-2 -> 2.6.0-3
[UPGRADE] liblouisutdml-data:amd64 2.6.0-2 -> 2.6.0-3
[UPGRADE] liblouisutdml7:amd64 2.6.0-2 -> 2.6.0-3
[UPGRADE] libmail-java:amd64 1.5.5-1 -> 1.5.6-1
[UPGRADE] libmetis5:amd64 5.1.0.dfsg-4 -> 5.1.0.dfsg-5
[UPGRADE] libmpcdec6:amd64 2:0.1~r475-1 -> 2:0.1~r475-2
[UPGRADE] libmtp-common:amd64 1.1.11-1 -> 1.1.12-1
[UPGRADE] libmtp9:amd64 1.1.11-1 -> 1.1.12-1
[UPGRADE] libnautilus-extension1a:amd64 3.20.1-3 -> 3.21.91.1-1
[UPGRADE] libnghttp2-14:amd64 1.13.0-1 -> 1.14.0-1
[UPGRADE] liborc-0.4-0:amd64 1:0.4.25-1 -> 1:0.4.26-1
[UPGRADE] libpam-gnome-keyring:amd64 3.20.0-1 -> 3.20.0-3
[UPGRADE] libpango-1.0-0:amd64 1.40.1-1 -> 1.40.2-1
[UPGRADE] libpango1.0-0:amd64 1.40.1-1 -> 1.40.2-1
[UPGRADE] libpangocairo-1.0-0:amd64 1.40.1-1 -> 1.40.2-1
[UPGRADE] libpangoft2-1.0-0:amd64 1.40.1-1 -> 1.40.2-1
[UPGRADE] libpangomm-1.4-1v5:amd64 2.40.0-1 -> 2.40.1-1
[UPGRADE] libpangoxft-1.0-0:amd64 1.40.1-1 -> 1.40.2-1
[UPGRADE] libpostproc54:amd64 7:3.1.2-1 -> 7:3.1.3-1+b3
[UPGRADE] libpulse-mainloop-glib0:amd64 9.0-2 -> 9.0-3
[UPGRADE] libpulse0:amd64 9.0-2 -> 9.0-3
[UPGRADE] libpython2.7:amd64 2.7.12-2 -> 2.7.12-3
[UPGRADE] libpython2.7-minimal:amd64 2.7.12-2 -> 2.7.12-3
[UPGRADE] libpython2.7-stdlib:amd64 2.7.12-2 -> 2.7.12-3
[UPGRADE] libpython3.5:amd64 3.5.2-3 -> 3.5.2-4
[UPGRADE] libpython3.5-minimal:amd64 3.5.2-3 -> 3.5.2-4
[UPGRADE] libpython3.5-stdlib:amd64 3.5.2-3 -> 3.5.2-4
[UPGRADE] libqt5qml5:amd64 5.6.1-5 -> 5.6.1-7
[UPGRADE] libqt5quick5:amd64 5.6.1-5 -> 5.6.1-7
[UPGRADE] libraw15:amd64 0.17.2-4 -> 0.17.2-6
[UPGRADE] libreoffice:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-avmedia-backend-gstreamer:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-base:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-base-core:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-base-drivers:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-calc:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-common:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-core:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-draw:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-gtk3:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-help-en-gb:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-impress:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-java-common:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-l10n-en-gb:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-math:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-pdfimport:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-report-builder:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-report-builder-bin:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-sdbc-hsqldb:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-style-galaxy:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libreoffice-wiki-publisher:amd64 1.2.0+LibO5.2.0-2 -> 1.2.0+LibO5.2.1-1
[UPGRADE] libreoffice-writer:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] libsecret-1-0:amd64 0.18.3-1 -> 0.18.5-2
[UPGRADE] libsecret-common:amd64 0.18.3-1 -> 0.18.5-2
[UPGRADE] libsoup-gnome2.4-1:amd64 2.54.1-1 -> 2.55.90-1
[UPGRADE] libsoup2.4-1:amd64 2.54.1-1 -> 2.55.90-1
[UPGRADE] libswresample2:amd64 7:3.1.2-1 -> 7:3.1.3-1+b3
[UPGRADE] libswscale4:amd64 7:3.1.2-1 -> 7:3.1.3-1+b3
[UPGRADE] libteamdctl0:amd64 1.24-1 -> 1.26-1
[UPGRADE] libusageenvironment3:amd64 2016.08.07-1 -> 2016.08.27-1
[UPGRADE] libva-drm1:amd64 1.7.1-2 -> 1.7.2-1
[UPGRADE] libva-x11-1:amd64 1.7.1-2 -> 1.7.2-1
[UPGRADE] libva1:amd64 1.7.1-2 -> 1.7.2-1
[UPGRADE] libvlc5:amd64 2.2.4-3+b1 -> 2.2.4-3+b4
[UPGRADE] libvlccore8:amd64 2.2.4-3+b1 -> 2.2.4-3+b4
[UPGRADE] libwayland-egl1-mesa:amd64 11.2.2-1 -> 12.0.2-1
[UPGRADE] libwebkit2gtk-4.0-37:amd64 2.12.3-1+b2 -> 2.12.5-1
[UPGRADE] libwpd-0.10-10:amd64 0.10.1-2 -> 0.10.1-4
[UPGRADE] libxfconf-0-2:amd64 4.12.0-2+b1 -> 4.12.0-3
[UPGRADE] mesa-utils:amd64 8.3.0-1 -> 8.3.0-2
[UPGRADE] myspell-en-gb:amd64 1:5.2.0-1 -> 1:5.2.1-1
[UPGRADE] python-gi:amd64 3.20.1-1 -> 3.21.91-2
[UPGRADE] python-gobject:amd64 3.20.1-1 -> 3.21.91-2
[UPGRADE] python-mutagen:amd64 1.34-1 -> 1.34.1-1
[UPGRADE] python2.7:amd64 2.7.12-2 -> 2.7.12-3
[UPGRADE] python2.7-minimal:amd64 2.7.12-2 -> 2.7.12-3
[UPGRADE] python3-gi:amd64 3.20.1-1 -> 3.21.91-2
[UPGRADE] python3-gi-cairo:amd64 3.20.1-1 -> 3.21.91-2
[UPGRADE] python3-uno:amd64 1:5.2.0-2 -> 1:5.2.1-1
[UPGRADE] python3.5:amd64 3.5.2-3 -> 3.5.2-4
[UPGRADE] python3.5-minimal:amd64 3.5.2-3 -> 3.5.2-4
[UPGRADE] qml-module-qtquick-window2:amd64 5.6.1-5 -> 5.6.1-7
[UPGRADE] qml-module-qtquick2:amd64 5.6.1-5 -> 5.6.1-7
[UPGRADE] sed:amd64 4.2.2-7.1 -> 4.2.2-8
[UPGRADE] shared-mime-info:amd64 1.6-1 -> 1.7-1
[UPGRADE] tcpdump:amd64 4.7.4-1+b1 -> 4.7.4-2
[UPGRADE] traceroute:amd64 1:2.1.0-1 -> 1:2.1.0-2
[UPGRADE] uno-libs3:amd64 5.2.0-2 -> 5.2.1-1
[UPGRADE] ure:amd64 5.2.0-2 -> 5.2.1-1
[UPGRADE] va-driver-all:amd64 1.7.1-2 -> 1.7.2-1
[UPGRADE] vlc:amd64 2.2.4-3+b1 -> 2.2.4-3+b4
[UPGRADE] vlc-nox:amd64 2.2.4-3+b1 -> 2.2.4-3+b4
[UPGRADE] xfconf:amd64 4.12.0-2+b1 -> 4.12.0-3
[UPGRADE] xfdesktop4:amd64 4.12.3-2 -> 4.12.3-3
[UPGRADE] xfdesktop4-data:amd64 4.12.3-2 -> 4.12.3-3
========================================

Log complete.

dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.3.5-20160222 (root@johnwtfea525) (gcc version 5.3.1 20160205 (Debian 5.3.1-8) ) #6 SMP Mon Feb 22 19:44:24 GMT 2016 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.3.5-20160222 root=/dev/mapper/dk-rt ro quiet snd-hda-intel.index=1,0
[    0.000000] tseg: 00af000000
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ac530fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ac531000-0x00000000ac560fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ac561000-0x00000000ac584fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ac585000-0x00000000ac665fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ac666000-0x00000000ae27bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ae27c000-0x00000000ae27cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae27d000-0x00000000ae284fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ae285000-0x00000000ae3e9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae3ea000-0x00000000aec17fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aec18000-0x00000000aec56fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aec57000-0x00000000aefedfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aefee000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed50000-0x00000000fed50fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: FUJITSU ESPRIMO A525-L/D3313-B1, BIOS V4.6.5.4 R1.10.0 for D3313-B1x 06/27/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 base 00AF000000 mask FFFF000000 uncachable
[    0.000000]   3 base 00B0000000 mask FFF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[    0.000000] e820: update [mem 0xaf000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd640-0x000fd64f] mapped at [ffff8800000fd640]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02424000, 0x02424fff] PGTABLE
[    0.000000] BRK [0x02425000, 0x02425fff] PGTABLE
[    0.000000] BRK [0x02426000, 0x02426fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[    0.000000]  [mem 0x13ee00000-0x13effffff] page 2M
[    0.000000] BRK [0x02427000, 0x02427fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x120000000-0x13edfffff]
[    0.000000]  [mem 0x120000000-0x13edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100001000-0x11fffffff]
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
[    0.000000]  [mem 0x100200000-0x11fffffff] page 2M
[    0.000000] BRK [0x02428000, 0x02428fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xac530fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xac3fffff] page 2M
[    0.000000]  [mem 0xac400000-0xac530fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xae27c000-0xae27cfff]
[    0.000000]  [mem 0xae27c000-0xae27cfff] page 4k
[    0.000000] BRK [0x02429000, 0x02429fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xae285000-0xae3e9fff]
[    0.000000]  [mem 0xae285000-0xae3e9fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xaec18000-0xaec56fff]
[    0.000000]  [mem 0xaec18000-0xaec56fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xaefee000-0xaeffffff]
[    0.000000]  [mem 0xaefee000-0xaeffffff] page 4k
[    0.000000] RAMDISK: [mem 0x37422000-0x37a08fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 FTS   )
[ 0.000000] ACPI: XSDT 0x00000000AC576088 000094 (v01 FUJ PC 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000AC57BE88 00010C (v05 FTS D3313-B1 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150818/tbfadt-654) [ 0.000000] ACPI: DSDT 0x00000000AC5761B0 005CD5 (v02 FTS D3313-B1 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000AC65B080 000040
[ 0.000000] ACPI: APIC 0x00000000AC57BF98 00007E (v03 FTS D3313-B1 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000AC57C018 000044 (v01 FTS D3313-B1 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000AC57C060 00003C (v01 FTS D3313-B1 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000AC57C0A0 000038 (v01 FTS D3313-B1 01072009 AMI 00000005) [ 0.000000] ACPI: MSDM 0x00000000AC57C0D8 000055 (v03 FUJ PC 01072009 AMI 00010013) [ 0.000000] ACPI: SPCR 0x00000000AC57C130 000050 (v01 A M I APTIO4 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000AC57C180 0006B2 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000AC57C838 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000) [ 0.000000] ACPI: CRAT 0x00000000AC580EF0 000200 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000AC5810F0 0013CA (v01 AMD CPMDFIGP 00000001 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000AC5824C0 00008C (v01 AMD CPMDFMOT 00000001 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000AC582550 0010E8 (v01 AMD CPMCMN 00000001 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000AC583638 000D4E (v01 AMD CPMZPODD 00000001 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13eff8000-0x13effbfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013aa00000-ffff88013e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ac530fff]
[    0.000000]   node   0: [mem 0x00000000ae27c000-0x00000000ae27cfff]
[    0.000000]   node   0: [mem 0x00000000ae285000-0x00000000ae3e9fff]
[    0.000000]   node   0: [mem 0x00000000aec18000-0x00000000aec56fff]
[    0.000000]   node   0: [mem 0x00000000aefee000-0x00000000aeffffff]
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000013effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[    0.000000] On node 0 totalpages: 964228
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10972 pages used for memmap
[    0.000000]   DMA32 zone: 702184 pages, LIFO batch:31
[    0.000000]   Normal zone: 4032 pages used for memmap
[    0.000000]   Normal zone: 258047 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 4, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xac531000-0xac560fff]
[    0.000000] PM: Registered nosave memory: [mem 0xac561000-0xac584fff]
[    0.000000] PM: Registered nosave memory: [mem 0xac585000-0xac665fff]
[    0.000000] PM: Registered nosave memory: [mem 0xac666000-0xae27bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xae27d000-0xae284fff]
[    0.000000] PM: Registered nosave memory: [mem 0xae3ea000-0xaec17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaec57000-0xaefedfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed4ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed50000-0xfed50fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed51000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xaf000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88013ec00000 s96600 r0 d30376 u524288
[    0.000000] pcpu-alloc: s96600 r0 d30376 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 949139
[    0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.5-20160222 root=/dev/mapper/dk-rt ro quiet snd-hda-intel.index=1,0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3701864K/3856912K available (11212K kernel code, 1671K rwdata, 3488K rodata, 1616K init, 904K bss, 155048K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1000 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1646.978 MHz processor
[ 0.000051] Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.95 BogoMIPS (lpj=6587912)
[    0.000058] pid_max: default: 32768 minimum: 301
[    0.000073] ACPI: Core revision 20150818
[    0.026129] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.026187] Security Framework initialized
[    0.026193] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.026209] AppArmor: AppArmor disabled by boot time parameter
[ 0.026821] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028907] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.029832] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.029853] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.030307] Initializing cgroup subsys io
[    0.030322] Initializing cgroup subsys memory
[    0.030337] Initializing cgroup subsys devices
[    0.030344] Initializing cgroup subsys freezer
[    0.030350] Initializing cgroup subsys net_cls
[    0.030358] Initializing cgroup subsys perf_event
[    0.030365] Initializing cgroup subsys net_prio
[    0.030408] CPU: Physical Processor ID: 0
[    0.030411] CPU: Processor Core ID: 0
[    0.030415] mce: CPU supports 6 MCE banks
[    0.030427] LVT offset 1 assigned for vector 0xf9
[    0.030434] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.030437] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.031093] Freeing SMP alternatives memory: 36K (ffffffff82337000 - ffffffff82340000)
[    0.034999] ftrace: allocating 40451 entries in 159 pages
[    0.062679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.207310] smpboot: CPU0: AMD GX-217GA SOC with Radeon(tm) HD Graphics (family: 0x16, model: 0x0, stepping: 0x1)
[    0.207360] Performance Events: AMD PMU driver.
[    0.207369] ... version:                0
[    0.207371] ... bit width:              48
[    0.207373] ... generic registers:      4
[    0.207376] ... value mask:             0000ffffffffffff
[    0.207378] ... max period:             00007fffffffffff
[    0.207380] ... fixed-purpose events:   0
[    0.207382] ... event mask:             000000000000000f
[    0.208847] MCE: In-kernel MCE decoding enabled.
[ 0.208972] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.209173] x86: Booting SMP configuration:
[    0.209177] .... node  #0, CPUs:      #1
[    0.212556] x86: Booted up 1 node, 2 CPUs
[    0.212565] smpboot: Total of 2 processors activated (6587.91 BogoMIPS)
[    0.213249] devtmpfs: initialized
[ 0.221187] PM: Registering ACPI NVS region [mem 0xac585000-0xac665fff] (921600 bytes) [ 0.221231] PM: Registering ACPI NVS region [mem 0xae27d000-0xae284fff] (32768 bytes) [ 0.221375] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.221525] pinctrl core: initialized pinctrl subsystem
[    0.221735] NET: Registered protocol family 16
[    0.231423] cpuidle: using governor ladder
[    0.243483] cpuidle: using governor menu
[    0.243740] ACPI: bus type PCI registered
[    0.243745] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.243868] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.243874] PCI: not using MMCONFIG
[    0.243877] PCI: Using configuration type 1 for base access
[    0.243879] PCI: Using configuration type 1 for extended access
[    0.244303] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.244306] mtrr: probably your BIOS does not setup all CPUs.
[    0.244307] mtrr: corrected configuration.
[    0.260382] ACPI: Added _OSI(Module Device)
[    0.260388] ACPI: Added _OSI(Processor Device)
[    0.260391] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.260394] ACPI: Added _OSI(Processor Aggregator Device)
[    0.264660] ACPI: Executed 1 blocks of module-level executable AML code
[    0.271689] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.274262] ACPI: Interpreter enabled
[ 0.274277] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580) [ 0.274286] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[    0.274316] ACPI: (supports S0 S3 S4 S5)
[    0.274320] ACPI: Using IOAPIC for interrupt routing
[ 0.274388] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.274477] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.274504] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.275511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.287473] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.290729] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.290742] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.291240] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.291834] PCI host bridge to bus 0000:00
[    0.291841] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.291846] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.291851] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.291856] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.291860] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[ 0.291865] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.291869] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.291873] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.291887] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[    0.292076] pci 0000:00:01.0: [1002:9837] type 00 class 0x030000
[ 0.292107] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.292120] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[    0.292130] pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.292140] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[    0.292149] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[    0.292179] pci 0000:00:01.0: supports D1 D2
[    0.292183] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.292341] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.292371] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[    0.292426] pci 0000:00:01.1: supports D1 D2
[    0.292557] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[    0.292719] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[    0.292793] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.292948] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[    0.293022] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[    0.293197] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.293238] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[    0.293316] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.293399] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.293489] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.293522] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.293532] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.293543] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.293553] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.293563] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.293574] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff]
[    0.293612] pci 0000:00:11.0: PME# supported from D3hot
[    0.293859] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.293877] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff]
[    0.294000] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.294083] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.294109] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff]
[    0.294174] pci 0000:00:12.2: supports D1 D2
[    0.294178] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.294253] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.294336] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.294353] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6b000-0xfeb6bfff]
[    0.294475] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.294556] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.294582] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff]
[    0.294647] pci 0000:00:13.2: supports D1 D2
[    0.294651] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.294732] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.294815] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.294998] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.295025] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[    0.295082] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.295157] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.295234] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.295445] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[    0.295588] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[    0.295728] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[    0.295868] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[    0.296013] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[    0.296153] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[    0.296404] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.296447] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.296477] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.296497] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[    0.296567] pci 0000:01:00.0: supports D1 D2
[    0.296571] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.296625] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.303470] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.303483] pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
[    0.303489] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[ 0.303497] pci 0000:00:02.2: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[    0.303640] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[    0.303711] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe901fff 64bit]
[    0.303875] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.311527] pci 0000:00:02.5: PCI bridge to [bus 02]
[    0.311544] pci 0000:00:02.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.313114] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 10 11 14 15)
[    0.313252] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
[    0.313392] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
[    0.313532] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
[    0.313649] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.313746] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.313841] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.313939] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.314241] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.314542] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.314547] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.314556] vgaarb: loaded
[    0.314559] vgaarb: bridge control possible 0000:00:01.0
[    0.314754] SCSI subsystem initialized
[    0.314882] libata version 3.00 loaded.
[    0.314894] ACPI: bus type USB registered
[    0.314928] usbcore: registered new interface driver usbfs
[    0.314944] usbcore: registered new interface driver hub
[    0.314972] usbcore: registered new device driver usb
[    0.315023] media: Linux media interface: v0.10
[    0.315043] Linux video capture interface: v2.00
[    0.315099] EDAC MC: Ver: 3.0.0
[    0.315389] Advanced Linux Sound Architecture Driver Initialized.
[    0.315434] PCI: Using ACPI for IRQ routing
[    0.322785] PCI: pci_cache_line_size set to 64 bytes
[    0.322854] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.322858] e820: reserve RAM buffer [mem 0xac531000-0xafffffff]
[    0.322862] e820: reserve RAM buffer [mem 0xae27d000-0xafffffff]
[    0.322865] e820: reserve RAM buffer [mem 0xae3ea000-0xafffffff]
[    0.322868] e820: reserve RAM buffer [mem 0xaec57000-0xafffffff]
[    0.322870] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[    0.322873] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.323104] Bluetooth: Core ver 2.20
[    0.323118] NET: Registered protocol family 31
[    0.323121] Bluetooth: HCI device and connection manager initialized
[    0.323126] Bluetooth: HCI socket layer initialized
[    0.323130] Bluetooth: L2CAP socket layer initialized
[    0.323143] Bluetooth: SCO socket layer initialized
[    0.323572] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.323579] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.325640] clocksource: Switched to clocksource hpet
[    0.344671] pnp: PnP ACPI init
[    0.344942] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.344951] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.345119] system 00:01: [mem 0xb0000000-0xbfffffff] has been reserved
[    0.345126] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.345411] system 00:02: [io  0x0a00-0x0a0f] has been reserved
[    0.345418] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.345859] pnp 00:03: [dma 0 disabled]
[    0.345963] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.346048] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.346115] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.346236] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.346242] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346337] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.346982] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.346987] system 00:08: [io  0x040b] has been reserved
[    0.346992] system 00:08: [io  0x04d6] has been reserved
[    0.346998] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.347003] system 00:08: [io  0x0c14] has been reserved
[    0.347008] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.347012] system 00:08: [io  0x0c52] has been reserved
[    0.347016] system 00:08: [io  0x0c6c] has been reserved
[    0.347020] system 00:08: [io  0x0c6f] has been reserved
[    0.347025] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.347029] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.347034] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.347038] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.347043] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.347047] system 00:08: [io  0x0800-0x089f] could not be reserved
[    0.347052] system 00:08: [io  0x0b20-0x0b3f] has been reserved
[    0.347056] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.347061] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.347065] system 00:08: [io  0xfe00-0xfefe] has been reserved
[ 0.347071] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.347077] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.347081] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.347086] system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.347091] system 00:08: [mem 0xfed50000-0xfed50fff] has been reserved
[ 0.347096] system 00:08: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.347101] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.347107] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348067] pnp: PnP ACPI: found 9 devices
[ 0.359290] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.359339] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.359345] pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
[    0.359352] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[ 0.359358] pci 0000:00:02.2: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[    0.359366] pci 0000:00:02.5: PCI bridge to [bus 02]
[    0.359372] pci 0000:00:02.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.359384] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.359388] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.359392] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.359395] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[ 0.359399] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.359403] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.359407] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.359411] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.359414] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.359418] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[    0.359422] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.359534] NET: Registered protocol family 2
[ 0.359865] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.360045] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.360204] TCP: Hash tables configured (established 32768 bind 32768)
[    0.360284] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.360320] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.360541] NET: Registered protocol family 1
[    0.360579] pci 0000:00:01.0: Video device with shadowed ROM
[    1.010109] PCI: CLS 64 bytes, default 64
[    1.010234] Trying to unpack rootfs image as initramfs...
[    1.187642] microcode: updated early to new patch_level=0x0700010f
[ 1.190326] Freeing initrd memory: 6044K (ffff880037422000 - ffff880037a09000)
[    1.190391] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.190396] software IO TLB [mem 0xa8531000-0xac531000] (64MB) mapped at [ffff8800a8531000-ffff8800ac530fff]
[    1.190723] kvm: Nested Virtualization enabled
[    1.190731] kvm: Nested Paging enabled
[    1.191003] perf: AMD NB counters detected
[    1.191008] perf: AMD L2I counters detected
[    1.191094] microcode: CPU0: patch_level=0x0700010f
[    1.191108] microcode: CPU1: patch_level=0x0700010f
[ 1.191183] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba
[    1.191192] LVT offset 0 assigned for vector 0x400
[    1.191211] perf: AMD IBS detected (0x000000ff)
[    1.196215] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.196265] audit: initializing netlink subsys (disabled)
[    1.196301] audit: type=2000 audit(1473920557.080:1): initialized
[    1.196804] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.197081] VFS: Disk quotas dquot_6.6.0
[ 1.197116] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.197410] ntfs: driver 2.1.32 [Flags: R/W].
[    1.207818] NET: Registered protocol family 38
[ 1.207867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.207934] io scheduler noop registered
[    1.207940] io scheduler deadline registered
[    1.207969] io scheduler cfq registered (default)
[ 1.208795] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
[    1.208800] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.208806] pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
[ 1.208843] pcieport 0000:00:02.5: Signaling PME through PCIe PME interrupt
[    1.208847] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.208853] pcie_pme 0000:00:02.5:pcie01: service driver pcie_pme loaded
[    1.208867] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.208881] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.208902] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.209127] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.209136] ACPI: Power Button [PWRB]
[ 1.209226] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.209231] ACPI: Power Button [PWRF]
[    1.209351] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[ 1.209412] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.209762] acpi device:01: registered as cooling_device0
[ 1.209867] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    1.209958] ACPI: acpi_idle registered with cpuidle
[    1.210451] GHES: HEST is not enabled!
[    1.210477] xenfs: not registering filesystem on non-xen platform
[    1.210639] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.231044] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.231715] lp: driver loaded but no devices found
[    1.232063] ppdev: user-space parallel port driver
[    1.232070] Linux agpgart interface v0.103
[    1.234008] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[    1.234012] AMD IOMMUv2 functionality not available on this system
[    1.234039] [drm] Initialized drm 1.1.0 20060810
[    1.234151] Found CRAT image with size=512
[    1.234155] Parsing CRAT table with 1 nodes
[    1.234158] Found CU entry in CRAT table with proximity_domain=0 caps=0
[    1.234160] CU CPU: cores=2 id_base=0
[    1.234162] Found memory entry in CRAT table with proximity_domain=0
[    1.234164] Found cache entry in CRAT table with processor_id=0
[    1.234167] Found cache entry in CRAT table with processor_id=0
[    1.234169] Found cache entry in CRAT table with processor_id=0
[    1.234171] Found cache entry in CRAT table with processor_id=1
[    1.234173] Found cache entry in CRAT table with processor_id=1
[    1.234175] Found cache entry in CRAT table with processor_id=1
[    1.234177] Creating topology SYSFS entries
[    1.234220] Finished initializing topology ret=0
[    1.234292] kfd kfd: Initialized module
[    1.234298] [drm] radeon kernel modesetting enabled.
[ 1.234745] [drm] initializing kernel modesetting (KABINI 0x1002:0x9837 0x1734:0x1202).
[    1.234761] [drm] register mmio base: 0xFEB00000
[    1.234763] [drm] register mmio size: 262144
[    1.234774] [drm] doorbell mmio base: 0xD0000000
[    1.234776] [drm] doorbell mmio size: 8388608
[    1.234834] ATOM BIOS: AMD
[ 1.234908] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [ 1.234912] radeon 0000:00:01.0: GTT: 2048M 0x0000000010000000 - 0x000000008FFFFFFF
[    1.234915] [drm] Detected VRAM RAM=256M, BAR=256M
[    1.234917] [drm] RAM width 128bits DDR
[    1.234997] [TTM] Zone  kernel: Available graphics memory: 1853972 kiB
[    1.235001] [TTM] Initializing pool allocator
[    1.235012] [TTM] Initializing DMA pool allocator
[    1.235050] [drm] radeon: 256M of VRAM memory ready
[    1.235053] [drm] radeon: 2048M of GTT memory ready.
[    1.235077] [drm] Loading kabini Microcode
[ 1.235108] radeon 0000:00:01.0: firmware: failed to load radeon/kabini_pfp.bin (-2) [ 1.235174] radeon 0000:00:01.0: firmware: failed to load radeon/KABINI_pfp.bin (-2)
[    1.235219] cik_cp: Failed to load firmware "radeon/KABINI_pfp.bin"
[    1.235267] [drm:cik_init] *ERROR* Failed to load firmware!
[    1.235310] radeon 0000:00:01.0: Fatal error during GPU init
[    1.235355] [drm] radeon: finishing device.
[    1.242563] [TTM] Finalizing pool allocator
[    1.242569] [TTM] Finalizing DMA pool allocator
[    1.242614] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[    1.242617] [drm] radeon: ttm finalized
[    1.243004] radeon: probe of 0000:00:01.0 failed with error -2
[    1.243097] [drm] amdgpu kernel modesetting enabled.
[    1.248870] brd: module loaded
[    1.251412] loop: module loaded
[    1.251622] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    1.251894] ahci 0000:00:11.0: version 3.0
[ 1.252114] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.252121] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.255365] scsi host0: ahci
[    1.255566] scsi host1: ahci
[ 1.255668] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 24 [ 1.255673] ata2: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e180 irq 24
[    1.255841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.263312] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc9000088c000, 90:1b:0e:3a:8a:53, XID 0c000800 IRQ 28 [ 1.263320] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.263366] Intel(R) Wireless WiFi driver for Linux
[    1.263369] Copyright(c) 2003- 2015 Intel Corporation
[ 1.263780] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7260-17.ucode (-2) [ 1.263849] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7260-16.ucode (-2) [ 1.263910] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7260-15.ucode (-2) [ 1.263971] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7260-14.ucode (-2) [ 1.264034] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7260-13.ucode (-2) [ 1.264241] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7260-12.ucode (-2)
[    1.264432] iwlwifi 0000:02:00.0: no suitable firmware found!
[    1.264999] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.265085] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 1.265285] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[    1.265552] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.265556] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.265560] usb usb1: Product: xHCI Host Controller
[    1.265563] usb usb1: Manufacturer: Linux 4.3.5-20160222 xhci-hcd
[    1.265567] usb usb1: SerialNumber: 0000:00:10.0
[    1.265827] hub 1-0:1.0: USB hub found
[    1.265844] hub 1-0:1.0: 2 ports detected
[    1.266243] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.266339] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.268677] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.268716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.268720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.268723] usb usb2: Product: xHCI Host Controller
[    1.268726] usb usb2: Manufacturer: Linux 4.3.5-20160222 xhci-hcd
[    1.268729] usb usb2: SerialNumber: 0000:00:10.0
[    1.268960] hub 2-0:1.0: USB hub found
[    1.268977] hub 2-0:1.0: 2 ports detected
[    1.269349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.269359] ehci-pci: EHCI PCI platform driver
[    1.269492] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.269598] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.269605] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.269617] ehci-pci 0000:00:12.2: debug port 1
[    1.269670] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6c000
[    1.278231] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.278487] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.278497] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.278506] usb usb3: Product: EHCI Host Controller
[    1.278513] usb usb3: Manufacturer: Linux 4.3.5-20160222 ehci_hcd
[    1.278520] usb usb3: SerialNumber: 0000:00:12.2
[    1.279195] hub 3-0:1.0: USB hub found
[    1.279226] hub 3-0:1.0: 4 ports detected
[    1.280611] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.280838] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.280856] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.280875] ehci-pci 0000:00:13.2: debug port 1
[    1.280956] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6a000
[    1.290175] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.290308] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.290313] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.290317] usb usb4: Product: EHCI Host Controller
[    1.290320] usb usb4: Manufacturer: Linux 4.3.5-20160222 ehci_hcd
[    1.290324] usb usb4: SerialNumber: 0000:00:13.2
[    1.290660] hub 4-0:1.0: USB hub found
[    1.290675] hub 4-0:1.0: 4 ports detected
[    1.291257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.291268] ohci-pci: OHCI PCI platform driver
[    1.291439] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.291536] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[    1.291586] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000
[    1.350277] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.350285] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.350289] usb usb5: Product: OHCI PCI host controller
[    1.350293] usb usb5: Manufacturer: Linux 4.3.5-20160222 ohci_hcd
[    1.350296] usb usb5: SerialNumber: 0000:00:12.0
[    1.350707] hub 5-0:1.0: USB hub found
[    1.350724] hub 5-0:1.0: 4 ports detected
[    1.351410] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.351527] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[    1.351564] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6b000
[    1.410278] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.410286] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.410290] usb usb6: Product: OHCI PCI host controller
[    1.410294] usb usb6: Manufacturer: Linux 4.3.5-20160222 ohci_hcd
[    1.410297] usb usb6: SerialNumber: 0000:00:13.0
[    1.410688] hub 6-0:1.0: USB hub found
[    1.410706] hub 6-0:1.0: 4 ports detected
[    1.411285] uhci_hcd: USB Universal Host Controller Interface driver
[    1.411353] usbcore: registered new interface driver usblp
[    1.411416] usbcore: registered new interface driver usb-storage
[    1.411482] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.411485] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.412193] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.412478] mousedev: PS/2 mouse device common for all mice
[    1.412945] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    1.413064] rtc_cmos 00:05: RTC can wake from S4
[    1.413232] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.413264] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.413324] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.413389] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    1.413751] usbcore: registered new interface driver uvcvideo
[    1.413754] USB Video Class driver (1.1.1)
[    1.413777] usbcore: registered new interface driver Philips webcam
[    1.413963] device-mapper: uevent: version 1.0.3
[ 1.414084] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-de...@redhat.com
[    1.414093] Bluetooth: Virtual HCI driver ver 1.5
[    1.414157] Bluetooth: HCI UART driver ver 2.3
[    1.414161] Bluetooth: HCI UART protocol H4 registered
[    1.414163] Bluetooth: HCI UART protocol BCSP registered
[    1.414165] Bluetooth: HCI UART protocol LL registered
[    1.414167] Bluetooth: HCI UART protocol ATH3K registered
[    1.414170] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    1.414191] Bluetooth: HCI UART protocol Intel registered
[    1.414207] Bluetooth: HCI UART protocol BCM registered
[    1.414213] AMD64 EDAC driver v3.4.0
[    1.414240] EDAC amd64: DRAM ECC disabled.
[ 1.414254] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.)
[    1.415195] hidraw: raw HID events driver (C) Jiri Kosina
[    1.415236] usbcore: registered new interface driver usbhid
[    1.415238] usbhid: USB HID core driver
[    1.415753] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[    1.416335] usbcore: registered new interface driver snd-usb-audio
[    1.416560] NET: Registered protocol family 10
[    1.417000] mip6: Mobile IPv6
[    1.417007] sit: IPv6 over IPv4 tunneling driver
[    1.417271] NET: Registered protocol family 17
[    1.417324] Bluetooth: RFCOMM socket layer initialized
[    1.417337] Bluetooth: RFCOMM ver 1.11
[    1.417346] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.417350] Bluetooth: HIDP socket layer initialized
[    1.417359] mpls_gso: MPLS GSO support
[    1.417825] AVX version of gcm_enc/dec engaged.
[    1.417828] AES CTR mode by8 optimization enabled
[ 1.419785] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input5 [ 1.419929] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card1/input6 [ 1.424115] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC671: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line [ 1.424124] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 1.424129] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    1.424132] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    1.424135] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    1.424139] snd_hda_codec_realtek hdaudioC0D2:      Mic=0x19
[    1.424143] snd_hda_codec_realtek hdaudioC0D2:      Line=0x18
[ 1.438419] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 1.438536] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 1.438647] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 1.438763] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    1.462410] registered taskstats version 1
[    1.462441] zswap: zpool zbud not available, using default zbud
[    1.462563] zpool: no driver for type zbud
[    1.462676] zswap: zbud zpool not available
[    1.462789] zswap: pool creation failed
[    1.463066] Key type encrypted registered
[ 1.463714] rtc_cmos 00:05: setting system clock to 2016-09-15 06:22:38 UTC (1473920558)
[    1.463849] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.464201] PM: Hibernation image not present or could not be loaded.
[    1.464214] ALSA device list:
[    1.464218]   #0: HD-Audio Generic at 0xfeb60000 irq 16
[    1.464220]   #1: HDA ATI HDMI at 0xfeb64000 irq 32
[ 1.467775] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.574323] ata2: SATA link down (SStatus 0 SControl 300)
[    1.746280] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.794587] usb 5-1: new low-speed USB device number 2 using ohci-pci
[    1.800634] ata1.00: ATA-8: TOSHIBA MQ01ABD032, AX002K, max UDMA/100
[ 1.800649] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.802707] ata1.00: configured for UDMA/100
[    1.862432] usb 6-3: new full-speed USB device number 2 using ohci-pci
[    1.906438] usb 3-3: new high-speed USB device number 4 using ehci-pci
[    1.963496] usb 5-1: New USB device found, idVendor=046d, idProduct=c401
[ 1.963512] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.963521] usb 5-1: Product: USB-PS/2 Trackball
[    1.963528] usb 5-1: Manufacturer: Logitech
[ 1.971796] input: Logitech USB-PS/2 Trackball as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:046D:C401.0001/input/input11 [ 1.972385] hid-generic 0003:046D:C401.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:12.0-1/input0
[    2.029559] usb 6-3: New USB device found, idVendor=8087, idProduct=07dc
[ 2.029574] usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.040308] usb 3-3: New USB device found, idVendor=05e3, idProduct=0608
[ 2.040323] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.040332] usb 3-3: Product: USB2.0 Hub
[    2.041641] hub 3-3:1.0: USB hub found
[    2.042020] hub 3-3:1.0: 4 ports detected
[    2.190549] tsc: Refined TSC clocksource calibration: 1646.911 MHz
[ 2.190566] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17bd40233a5, max_idle_ns: 440795281842 ns
[    2.234589] usb 5-2: new full-speed USB device number 3 using ohci-pci
[    2.401791] usb 5-2: New USB device found, idVendor=058f, idProduct=9254
[ 2.401807] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.401815] usb 5-2: Product: Generic USB Hub
[    2.401823] usb 5-2: Manufacturer: ALCOR
[    2.403750] hub 5-2:1.0: USB hub found
[    2.405785] hub 5-2:1.0: 4 ports detected
[    2.678741] usb 5-4: new full-speed USB device number 4 using ohci-pci
[    2.918845] usb 5-2.4: new full-speed USB device number 5 using ohci-pci
[    2.934044] usb 5-4: New USB device found, idVendor=046d, idProduct=08b2
[ 2.934059] usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.935973] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
[ 3.027901] usb 5-2.4: not running at top speed; connect to a high speed hub [ 3.059052] usb 5-2.4: New USB device found, idVendor=0e8d, idProduct=1806 [ 3.059068] usb 5-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.059077] usb 5-2.4: Product: MT1806
[    3.059084] usb 5-2.4: Manufacturer: MediaTek Inc
[    3.059091] usb 5-2.4: SerialNumber: R8X76YAD60067F
[    3.075180] usb-storage 5-2.4:1.0: USB Mass Storage device detected
[    3.075607] scsi host2: usb-storage 5-2.4:1.0
[    3.191155] clocksource: Switched to clocksource tsc
[    3.429491] pwc: Registered as video0.
[ 3.429682] input: PWC snapshot button as /devices/pci0000:00/0000:00:12.0/usb5/5-4/input/input12 [ 4.085431] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208DB TS01 PQ: 0 ANSI: 0 [ 4.115481] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.115497] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.116030] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.116327] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    4.263383] floppy0: no floppy controllers found
[ 4.264710] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 2K PQ: 0 ANSI: 5 [ 4.265370] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    4.265380] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.265509] sd 0:0:0:0: Attached scsi generic sg1 type 0
[    4.265576] sd 0:0:0:0: [sda] Write Protect is off
[    4.265588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.265687] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.406439]  sda: sda1 sda2 sda3
[    4.407801] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.409256] Freeing unused kernel memory: 1616K (ffffffff821a3000 - ffffffff82337000)
[    4.409269] Write protecting the kernel read-only data: 16384k
[ 4.410950] Freeing unused kernel memory: 1064K (ffff880001af6000 - ffff880001c00000) [ 4.411802] Freeing unused kernel memory: 608K (ffff880001f68000 - ffff880002000000) [ 4.583366] random: systemd-udevd urandom read with 31 bits of entropy available
[    4.837653] r8169 0000:01:00.0 enp1s0: renamed from eth0
[   10.769408] random: nonblocking pool is initialized
[   26.185963] PM: Starting manual resume from disk
[   26.185974] PM: Hibernation image partition 252:3 present
[   26.185977] PM: Looking for hibernation image.
[   26.186185] PM: Image not found (code -22)
[   26.186189] PM: Hibernation image not present or could not be loaded.
[ 26.387746] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 27.326449] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   27.326997] systemd[1]: Detected architecture x86-64.
[   27.342441] systemd[1]: Set hostname to <johnwtfea525>.
[   28.763653] systemd[1]: Created slice User and Session Slice.
[   28.763846] systemd[1]: Reached target Remote File Systems.
[   28.764015] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   28.764307] systemd[1]: Listening on LVM2 metadata daemon socket.
[   28.764503] systemd[1]: Listening on Journal Audit Socket.
[ 28.764632] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   28.764742] systemd[1]: Listening on Journal Socket (/dev/log).
[   28.764778] systemd[1]: Reached target User and Group Name Lookups.
[   28.764886] systemd[1]: Listening on udev Control Socket.
[   28.764954] systemd[1]: Listening on udev Kernel Socket.
[   28.765021] systemd[1]: Listening on LVM2 poll daemon socket.
[   28.765096] systemd[1]: Listening on fsck to fsckd communication Socket.
[   28.765234] systemd[1]: Listening on Journal Socket.
[   28.765471] systemd[1]: Created slice System Slice.
[   28.783915] systemd[1]: Starting Load Kernel Modules...
[   28.786362] systemd[1]: Mounting Huge Pages File System...
[   28.789050] systemd[1]: Mounting Debug File System...
[   28.789679] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   28.790153] systemd[1]: Created slice system-getty.slice.
[   28.792341] systemd[1]: Starting Remount Root and Kernel File Systems...
[   28.792465] systemd[1]: Reached target Slices.
[   28.794999] systemd[1]: Mounting POSIX Message Queue File System...
[   28.799705] systemd[1]: Starting Set the console keyboard layout...
[   28.802606] systemd[1]: Starting Create Static Device Nodes in /dev...
[   28.803184] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 28.805588] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 28.805860] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 28.806133] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   28.806203] systemd[1]: Reached target Paths.
[   28.806378] systemd[1]: Listening on Syslog Socket.
[   28.809020] systemd[1]: Starting Journal Service...
[   29.153617] systemd[1]: Started Journal Service.
[   29.725819] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[ 33.769471] Adding 7811068k swap on /dev/mapper/dk-sw. Priority:-1 extents:1 across:7811068k FS [ 34.562920] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 34.655179] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 34.805558] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 34.960724] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 35.133268] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 35.339605] systemd-journald[864]: Received request to flush runtime journal from PID 1
[   43.281956] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 43.500970] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[   43.544467] r8169 0000:01:00.0 enp1s0: link down
[   43.544505] r8169 0000:01:00.0 enp1s0: link down
[   43.544624] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   46.536988] r8169 0000:01:00.0 enp1s0: link up
[   46.537008] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 65.322308] traps: lightdm-gtk-gre[1888] trap int3 ip:7fdff3bf1101 sp:7ffec0cc33f0 error:0
[   65.825136] mtrr: no MTRR for c0000000,1000000 found

-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.3.5-20160222 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages lightdm-gtk-greeter depends on:
ii  libc6                   2.23-5
ii  libcairo2               1.14.6-1+b1
ii  libgdk-pixbuf2.0-0      2.34.0-1
ii  libglib2.0-0            2.49.6-1
ii  libgtk-3-0              3.21.5-3
ii  liblightdm-gobject-1-0  1.18.2-2
ii  libx11-6                2:1.6.3-1

Versions of packages lightdm-gtk-greeter recommends:
ii  adwaita-icon-theme [gnome-icon-theme-symbolic]  3.21.91-1
pn  desktop-base                                    <none>
ii  gnome-icon-theme-symbolic                       3.12.0-2
pn  gnome-themes-standard                           <none>
ii  policykit-1                                     0.105-16

lightdm-gtk-greeter suggests no packages.

-- no debconf information

_______________________________________________
Pkg-xfce-devel mailing list
Pkg-xfce-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-xfce-devel

Reply via email to