> -----Original Message----- > From: [email protected] [mailto:platform-driver-x86- > [email protected]] On Behalf Of Alan Cox > Sent: Thursday, January 26, 2012 11:10 PM > To: [email protected]; [email protected]; linux- > [email protected] > Subject: [PATCH 5/5] platform-x86: intel_mid_thermal: turn off thermistor > voltage by default > > From: Mika Westerberg <[email protected]> > > Instead of complaining that the voltage is on, we can just ask the MSIC to > turn the voltage off. This should save some power. > > Voltage for thermistors is turned on when ADC conversion is initiated.
Acked-by: Durgadoss R <[email protected]> Thanks, Durga > > Signed-off-by: Mika Westerberg <[email protected]> > Signed-off-by: Kirill A. Shutemov <[email protected]> > Signed-off-by: Alan Cox <[email protected]> > --- > > drivers/platform/x86/intel_mid_thermal.c | 6 ++++-- > 1 files changed, 4 insertions(+), 2 deletions(-) > > > diff --git a/drivers/platform/x86/intel_mid_thermal.c > b/drivers/platform/x86/intel_mid_thermal.c > index aef4979..a4e56be 100644 > --- a/drivers/platform/x86/intel_mid_thermal.c > +++ b/drivers/platform/x86/intel_mid_thermal.c > @@ -360,8 +360,10 @@ static int mid_initialize_adc(struct device *dev) > if (ret) > return ret; > > - if (data & MSIC_ADCTHERM_MASK) > - dev_warn(dev, "ADCTHERM already set"); > + data &= ~MSIC_ADCTHERM_MASK; > + ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, data); > + if (ret) > + return ret; > > /* Index of the first channel in which the stop bit is set */ > channel_index = find_free_channel(); > > -- > To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" > in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html
