Author: sparky Date: Thu Mar 16 14:22:56 2006 New Revision: 7183 Modified: ppcrcd/trunk/doc/README.opts Log: - updated
Modified: ppcrcd/trunk/doc/README.opts ============================================================================== --- ppcrcd/trunk/doc/README.opts (original) +++ ppcrcd/trunk/doc/README.opts Thu Mar 16 14:22:56 2006 @@ -1,89 +1,30 @@ +=== PPCRCD kernel command-line options === -Options which can be saved to nvram too. -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +== Options which can be saved to nvram == Each of options if specified in cmdline will overwrite nvram options. -nvram options can be disabled at boot time with nonv<option> specified in +nvram options can be disabled at boot time with <*<nonv<option>>*> specified in cmdline. -keytable=<name> - preset system keytable - ex. spanish keytable: keytable=es +<options "nv"> -conf=<device>[:<modules>[:<fs>[:<file>]]] - load configuration from <device>, from <file> (if it isn't ppcrcd.xml.gz) - first loads coma separated kernel modules (if needed for device) - and mounts it as <fs> filesystem (needed if can't be autodetected) - <modules>, <fs> and <file> can be blank - examples: - config on /dev/hda5 (pmac-ide) in /conf2.gz file - conf=/dev/hda5:::conf2.gz - config on /dev/hda2 with hfsplus fs in (standart) ppcrcd.xml.gz file - conf=/dev/hda5::hfsplus - config on usb-storage, vfat - conf=/dev/sda1:usb-storage,sd_mod,ohci-hcd:vfat:ppc1.gz -modpre=<module1>[,<module2>[,<module3>[...]]] - loads modules before anything, before udev, and debug shell - ex.: modpre=usbhid,ohci-hcd +== Command-line only options == -module=<module1>[,<module2>[,<module3>[...]]] - adds module(s) to /etc/modules - ex.: module=therm_adt746x +<options ""> -eth=<module>:<ip/mask>[:<gate>[:<dns1>[,<dns2>[,...]]]] - set up ethernet, for <module> ethernet card - multiple eth allowed - ip/mask can be like: 192.168.0.2/24, dhcp or pump - last eth with gate specified will become default route - all dns of each eth will be added to /etc/resolv.conf - example: - eth=sungem:192.168.0.5/24:192.168.0.2:192.168.0.2 -service=<service1>[,<service2>[,<service3>]] - start service(s) at system startup +== Options used in initrd == +<options "initrd"> -Command line only options: -^^^^^^^^^^^^^^^^^^^^^^^^^^ +== Options used in memtest script == -nonveth - don't prepare eth initiation using nvram informations +<options "memtest"> -nonvconf - don't load configuration using nvram informations - -nonvkeytable - don't setup key table using nvram informations -nonvservice - don't start services using nvram informations +== Options changing ppcrcd behaviour == +Those options will be passed by yaboot automatically when selecting image +with same name. -nonvmodpre - don't pre-load modules specified in nvram - -nonvmodules - don't add to /etc/modules modules specified in nvram - -nonet - don't start network services at boot time changes ONBOOT value to "no" - in ifcfg-* scripts - -nodetect - don't try to autodetect hardware if loading configure fails - - -verbose=<level> -verbose - Verbosity level (min 0, max 5), without <level> specified: 0 - Default: no verbose (less than 0) - -debug - put debugging information (set -x), and runs sh at startup to - allow do something - -stop - stops at end of linuxrc (in initrd) and runs shell - - -# vim: language=english +<options "bootoption"> _______________________________________________ pld-cvs-commit mailing list [email protected] http://lists.pld-linux.org/mailman/listinfo/pld-cvs-commit
