Dnia 18-01-2006, śro o godzinie 20:40 +0100, Michal Abramowicz
napisał(a):
> On Wed, Jan 18, 2006 at 05:24:03PM +0100, Bartłomiej Nogaś wrote:
> > Powinien tworzyc eth i ppp. U mnie tworzy samo eth1 kiedy łącze się
> > ponownie(po rozłączeniu) bez przeładowania modułu eagle-usb.
>
> zaciekawiło mnie to:"ponownie(po rozłączeniu)"
>
> rpm -qa kernel\* jesli mozna oraz eagle
>
> bo mi na 2.6.14.6-3 nie działa _wogole_ noezdrada na sagemie
>
nie dziala.
to z logow.
Jan 18 19:37:30 octopus pppd[2887]: using channel 2
Jan 18 19:37:30 octopus pppd[2887]: Using interface ppp0
Jan 18 19:37:30 octopus pppd[2887]: Connect: ppp0 <--> /dev/pts/1
Jan 18 19:37:30 octopus pppd[2887]: Script pppoa -I eth0 finished (pid 2888),
status = 0x1
Jan 18 19:37:31 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:34 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:37 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:40 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:43 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:46 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:49 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:52 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:55 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:37:58 octopus pppd[2887]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0xb27e208c> <pcomp> <accomp>]
Jan 18 19:38:01 octopus pppd[2887]: LCP: timeout sending Config-Requests
Jan 18 19:38:01 octopus pppd[2887]: Connection terminated.
Jan 18 19:38:01 octopus pppd[2887]: using channel 3
Jan 18 19:38:01 octopus pppd[2887]: Using interface ppp0
Jan 18 19:38:01 octopus pppd[2887]: Connect: ppp0 <--> /dev/pts/0
Jan 18 19:38:01 octopus pppd[2887]: Script pppoa -I eth0 finished (pid 6252),
status = 0x1
Jan 18 19:38:02 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:05 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:08 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:11 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:14 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:17 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:20 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:23 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:26 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:29 octopus pppd[2887]: sent [LCP ConfReq id=0x3 <asyncmap 0x0>
<magic 0xb161fbcd> <pcomp> <accomp>]
Jan 18 19:38:32 octopus pppd[2887]: LCP: timeout sending Config-Requests
Jan 18 19:38:32 octopus pppd[2887]: Connection terminated.
a powinno byc
Jan 18 19:08:22 octopus pppd[2875]: rcvd [LCP ConfReq id=0xa1 <auth chap MD5>
<magic 0x56b8a1eb>]
Jan 18 19:08:22 octopus pppd[2875]: sent [LCP ConfAck id=0xa1 <auth chap MD5>
<magic 0x56b8a1eb>]
Jan 18 19:08:24 octopus pppd[2875]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0xdff230ce> <pcomp> <accomp>]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>
<magic 0xdff230ce> <pcomp> <accomp>]
Jan 18 19:08:24 octopus pppd[2875]: sent [LCP EchoReq id=0x0 magic=0xdff230ce]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [CHAP Challenge id=0xc0
<18c7d5eccdc4e7e72ba84dbe993b5e6ab15d96ad>, name = "gda_ru4"]
Jan 18 19:08:24 octopus pppd[2875]: sent [CHAP Response id=0xc0
<82425e687756cdf70c0ff15caad9dd92>, name = "[EMAIL PROTECTED]"]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [LCP EchoRep id=0x0 magic=0x56b8a1eb]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [CHAP Success id=0xc0 ""]
Jan 18 19:08:24 octopus pppd[2875]: CHAP authentication succeeded
Jan 18 19:08:24 octopus pppd[2875]: sent [CCP ConfReq id=0x1 <deflate 15>
<deflate(old#) 15> <bsd v1 15>]
Jan 18 19:08:24 octopus pppd[2875]: sent [IPCP ConfReq id=0x1 <compress VJ 0f
01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [IPCP ConfReq id=0xe8 <addr
213.25.2.63>]
Jan 18 19:08:24 octopus pppd[2875]: sent [IPCP ConfAck id=0xe8 <addr
213.25.2.63>]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [LCP ProtRej id=0xa2 80 fd 01 01 00 0f
1a 04 78 00 18 04 78 00 15 03 2f b1 cd]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f
01>]
Jan 18 19:08:24 octopus pppd[2875]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>
<ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [IPCP ConfNak id=0x2 <addr 83.25.71.2>
<ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>]
Jan 18 19:08:24 octopus pppd[2875]: sent [IPCP ConfReq id=0x3 <addr 83.25.71.2>
<ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>]
Jan 18 19:08:24 octopus pppd[2875]: rcvd [IPCP ConfAck id=0x3 <addr 83.25.71.2>
<ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>]
Jan 18 19:08:24 octopus pppd[2875]: Cannot determine ethernet address for proxy
ARP
Jan 18 19:08:24 octopus pppd[2875]: local IP address 83.25.71.2
Jan 18 19:08:24 octopus pppd[2875]: remote IP address 213.25.2.63
Jan 18 19:08:24 octopus pppd[2875]: primary DNS address 194.204.152.34
Jan 18 19:08:24 octopus pppd[2875]: secondary DNS address 217.98.63.164
Jan 18 19:08:24 octopus pppd[2875]: Script /etc/ppp/ip-up started (pid 4165)
Jan 18 19:08:25 octopus pppd[2875]: Script /etc/ppp/ip-up finished (pid 4165),
status = 0x0
Probowalem tez 2.6.14.6-4.2 z ueagle ale nie barzdo wiedzialem co z czym
zjesc.
juz zaciagnolem firmware ktorego nie mialem.
i poprobuje jeszcze jutro.
I wydrukuje obstrukcje konfiguracji.
chyba ze ktos napisze do jutra jak skonfigurowac ueagle to ja jutro
objecuje wieczorem sprawdzic.
TiweK
_______________________________________________
pld-devel-pl mailing list
[email protected]
http://lists.pld-linux.org/mailman/listinfo/pld-devel-pl
