Serwer działa na RH9.0 2.4.20smp bez problemu. Pod PLD i kernelami 2.6(up/smp) sieć usypia na 5-30 sekund przy cat huge_file:
sundance.c:v1.01+LK1.06b 6-Nov-2002 Written by Donald Becker http://www.scyld.com/network/sundance.html divert: allocating divert_blk for eth0 eth0: D-Link DFE-530TXS FAST Ethernet Adapter at 0xf8893000, 00:05:5d:fd:e5:12, IRQ 22. eth0: MII PHY found at address 1, status 0x782d advertising 01e1. eth0: Link changed: eth0: Link changed: 10Mbps, half duplex IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timed out, TxStatus 00 TxFrameId 13, resetting... 00 0476a000 0476a010 00008001(00) 02c5a0ce 800005ea 01 0476a010 0476a020 00008005(01) 3745a8c2 8000004e 02 0476a020 0476a030 00008009(02) 377c00ce 800005ea 03 0476a030 0476a040 0000800d(03) 377f1ec2 8000004e ... [EMAIL PROTECTED] mimooh]$ sudo lsmod Module Size Used by Not tainted ipv6 217684 -1 (autoclean) sundance 16800 1 (autoclean) mii 4124 0 (autoclean) [sundance] ext3 73376 1 jbd 56336 1 [ext3] raid1 16044 3 pdc-ultra 67200 6 sd_mod 13452 12 scsi_mod 110488 2 [pdc-ultra sd_mod] Byłem pewien, że to problem kernela, więc skopiowałem z RH /lib/modules/ i /boot/vmlinuz + initrd. Niestety dalej ten sam problem. W którym miejscu może tkwić problem? Byłem przekonany, że różnice w obsłudze sprzętu w różnych dystrybucjach leżą tylko w kernelu/modułach. mimooh _______________________________________________ pld-devel-pl mailing list [EMAIL PROTECTED] http://lists.pld-linux.org/mailman/listinfo/pld-devel-pl
