Na systemie bez włączonego hotpluga:
[EMAIL PROTECTED] /var/log]# modprobe parport_pc verbose_probing=1
#v+
kernel: Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
kernel: Winbond chip at EFER=0x2e key=0x87 devid=60 devrev=16 oldid=ff
type=83697HF
kernel: Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=03
kernel: Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
kernel: Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
kernel: Winbond LPT Config: Port mode=ECP and EPP-1.9
kernel: SMSC Super-IO detection, now testing Ports 2F0, 370 ...
kernel: parport: PnPBIOS parport detected.
kernel: pnp: Device 00:0f disabled.
#v-
Po rmmod parport_pc i takim smamym jak wcześniej modprobe:
#v+ Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... pnp: Device 00:0f activated. parport: PnPBIOS parport detected. pnp: Device 00:0f disabled. #v-
echo "manual 1 dynamic" > /sys/bus/pnp/devices/00:0f/resources Nie daje żadnego rezultatu: #v+ [EMAIL PROTECTED] /var/log]# cat /sys/bus/pnp/devices/00:0f/resources state = disabled io 0x378-0x37f io 0x778-0x77f irq 7 dma 3 #v-
Ok. Na 2.6.10 już działa.
-- z wyrazami szacunku, Jakub Piotr Cłapa
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ pld-devel-pl mailing list [EMAIL PROTECTED] http://lists.pld-linux.org/mailman/listinfo/pld-devel-pl
