On 7/13/06, Adam Gołębiowski <[EMAIL PROTECTED]> wrote: > Spróbuj zbudować initrd z tym modułem: > > # geninitrd --preload=matroxfb_g450 /boot/initrd `uname -r`
initrd powiedziało [...] Loading module [matroxfb_misc] without options. Loading module [g450_pll] without options. Loading module [matroxfb_g450] without options. Loading module [scsi_mod] without options. Loading module [libata] without options. Loading module [ata_piix] without options. Loading module [sd_mod] without options. Loading module [exportfs] without options. Loading module [xfs] without options. Adding rootfs finding based on root= option support. wpis w grubie: title Linux - new savedefault root (hd0,0) kernel (hd0,0)/vmlinuz-2.6.16.23-1 root=0x816 append="video=vesafb:off" initrd (hd0,0)/initrd-2.6.16.23-1 a dmesg mówi tyle: vesafb: Matrox, Matrox G550, 00 (OEM: Matrox Graphics Inc.) vesafb: VBE version: 3.0 vesafb: VBIOS/hardware supports DDC2 transfers vesafb: monitor limits: vf = 77 Hz, hf = 83 kHz, clk = 140 MHz vesafb: invalid resolution, width not specified vesafb: probe of vesafb.0 failed with error -22 i ja już nie wiem czy dobry ten fb załadował? W każdym razie ciągle nie jest tworzone /dev/fb0... -- Pozdrawiam, Liliana "Write your code as if the person maintaining it is a homicidal maniac who knows where you live." Tak, wiem że gmail daje zły delimiter sygnaturki ;] _______________________________________________ pld-users-pl mailing list [email protected] http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
