Piotr Karbowski napisał(a): > On 2/17/07, Pawel Dlugosz <[EMAIL PROTECTED]> wrote: >> Miałem podobny problem z Maxtorem 40GB. >> Tylko tamtemu dało się zworkami ograniczyć >> pojemność do 32GB, wtedy stary bios widział >> go bez problemu i system ładnie wstawał. > > Przypomniało mi się ze mimo iż ograniczymy taki dysk po wystartowaniu > systemu będziemy mieli dostęp do całego dysku, nie tylko do 32G więc > sądze ze spokojnie mozesz miec ten zworek ustawiony na ograniczanie > dysku.
Ja mam tak: > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller at PCI slot 0000:00:07.1 > PIIX4: chipset revision 1 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA > Probing IDE interface ide0... > hda: SAMSUNG SP0411N, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: WDC WD400BB-00JHC0, ATA DISK drive > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 512KiB > hda: Host Protected Area detected. > current capacity is 66055248 sectors (33820 MB) > native capacity is 78242976 sectors (40060 MB) > hda: Host Protected Area disabled. > hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) > hda: cache flushes supported Chodzi bez problemu, kernel po załadowaniu widzi cały dysk: > # df -H > Filesystem Size Used Avail Use% Mounted on > /dev/hda1 41G 32G 8.1G 80% / -- pzdr Stacho Pal _______________________________________________ pld-users-pl mailing list [email protected] http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
