Witam Próbuje zwalczyć lirca z wspomnianą kartą i doszedłęm do momentu kiedy w logach pojawia się:
cx2388x v4l2 driver version 0.0.5 loaded ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 CORE cx88[0]: subsystem: 1461:000b, board: AverTV Studio 303 (M126) [card=6,autodetected] TV tuner 38 at 0x1fe, Radio tuner -1 at 0x1fe tuner 0-0060: All bytes are equal. It is not a TEA5767 tuner 0-0060: chip found @ 0xc0 (cx88[0]) tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) tda9887 0-0043: chip found @ 0x86 (cx88[0]) input: cx88 IR (AverTV Studio 303 (M12 as /class/input/input5 cx88[0]/0: found at 0000:00:0b.0, rev: 5, irq: 11, latency: 32, mmio: 0xef000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff) set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00) set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff) set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed] Jak rozumiem linia: input: cx88 IR (AverTV Studio 303 (M12 as /class/input/input5 oznacza, że moduł odnalazł port irda i ... no właśnie i co dalej? Mam jakieś moduły załadować? Czytałem jakąś dokumentacje ale nie mogę sobie poradzić. Jak ktoś wie co dalej to proszę o info. -- ______________Pozdrówka___________ / ___ ___ ___ ___ ___ / _ /__/ ___/ /_ /__ / /_ /_/ /__/ / | /__ /__ ___/ / /__ / | _______________________________________________ pld-users-pl mailing list [email protected] http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
