witam, bootuje system z rescuecd i jest tak:
[root@rescue ~]# modprobe sd-mod
[root@rescue ~]# mdadm -A /dev/md0 /dev/sda /dev/sdb
mdadm: /dev/md0 has been started with 2 drives.
[root@rescue ~]# mkdir /pldroot
[root@rescue ~]# mount /dev/md0p1 /pldroot/
mount: special device /dev/md0p1 does not exist
[root@rescue ~]# fdisk -l
Disk /dev/md0: 21.5 GB, 21474770944 bytes
2 heads, 4 sectors/track, 5242864 cylinders, total 41942912 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x21faa2fa
Device Boot Start End Blocks Id System
/dev/md0p1 * 1952 37111327 18554688 83 Linux
/dev/md0p2 37111328 41942911 2415792 82 Linux swap /
Solaris
Disk /dev/sda: 21.5 GB, 21474836480 bytes
2 heads, 4 sectors/track, 5242880 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x21faa2fa
Device Boot Start End Blocks Id System
/dev/sda1 * 1952 37111327 18554688 83 Linux
/dev/sda2 37111328 41942911 2415792 82 Linux swap / Solaris
Disk /dev/sdb: 21.5 GB, 21474836480 bytes
2 heads, 4 sectors/track, 5242880 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x21faa2fa
Device Boot Start End Blocks Id System
/dev/sdb1 * 1952 37111327 18554688 83 Linux
/dev/sdb2 37111328 41942911 2415792 82 Linux swap / Solaris
[root@rescue ~]# mount /dev/md0p1 /pldroot/
[root@rescue ~]#
moje pytanie brzmi, dlaczego tuż po uruchomieniu md0 na sda i sdb nie są
widoczne partycje md0p1 i md0p2? dopiero jak się wywoła np fdisk -l
automagicznie partycje na md0 są widoczne...
pozdrawiam
_______________________________________________
pld-users-pl mailing list
[email protected]
http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
