Co to cholerstwo oznacza po teście ??
The following warning/error was logged by the smartd daemon:
Device: /dev/sdd [SAT], Self-Test Log error count increased from 1 to 2
Że dysk po raz drugi nie przeszedł self-testu.
Rośnie prawdopodobieństwo padu dysku.
Tylko jak zapuszczę:
badblock -svn /dev/sdd
to mi nic nie wykrywa.
A wydaje mi się, że rok temu ten dysk chyba wymieniałem (a może nie ten
- nie pamiętam).
Jak zaznaczyć/wymienić te 3 sektory ??!!
Device: /dev/sdd [SAT], 3 Offline uncorrectable sectors
hdparm --write-sector xyz z utratą danych z tego sektora oczywiście.
Jak sprawdzić które sektory mam nadpisać ??
[[email protected] ~]# smartctl -x /dev/sdd
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-3.14.10-1] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Green
Device Model: WDC WD30EZRX-00MMMB0
Serial Number: WD-WCAWZ1499279
LU WWN Device Id: 5 0014ee 25b9c49c1
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Nov 27 15:32:00 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test
completed having
the read element of the test failed.
Total time to complete Offline
data collection: (51900) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 498) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 147 146 021 - 9633
4 Start_Stop_Count -O--CK 100 100 000 - 125
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 052 052 000 - 35412
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 123
192 Power-Off_Retract_Count -O--CK 200 200 000 - 89
193 Load_Cycle_Count -O--CK 001 001 000 - 2073965
194 Temperature_Celsius -O---K 126 095 000 - 26
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 3
198 Offline_Uncorrectable ----CK 200 200 000 - 3
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 3
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 241 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 241 [0] occurred at disk power-on lifetime: 34120 hours (1421 days
+ 16 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 06 4e cd f8 40 00 Error: UNC at LBA =
0x1064ecdf8 = 4400795128
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
60 02 60 00 50 00 01 06 4e d3 95 40 08 39d+03:23:12.696 READ FPDMA
QUEUED
60 01 a0 00 48 00 01 06 4e cd f5 40 08 39d+03:23:12.670 READ FPDMA
QUEUED
60 04 00 00 40 00 01 06 4e cf 95 40 08 39d+03:23:12.665 READ FPDMA
QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 39d+03:23:12.665 SET FEATURES
[Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 39d+03:23:12.665 READ NATIVE
MAX ADDRESS EXT [OBS-ACS-3]
Error 240 [23] occurred at disk power-on lifetime: 34120 hours (1421
days + 16 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 06 4e cd f8 40 00 Error: UNC at LBA =
0x1064ecdf8 = 4400795128
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
60 04 00 00 30 00 01 06 4e cb 95 40 08 39d+03:23:09.942 READ FPDMA
QUEUED
60 04 00 00 28 00 01 06 4e c7 95 40 08 39d+03:23:09.935 READ FPDMA
QUEUED
60 04 00 00 20 00 01 06 4e c3 95 40 08 39d+03:23:09.929 READ FPDMA
QUEUED
60 04 00 00 18 00 01 06 4e bf 95 40 08 39d+03:23:09.900 READ FPDMA
QUEUED
60 04 00 00 10 00 01 06 4e bb 95 40 08 39d+03:23:09.895 READ FPDMA
QUEUED
Error 239 [22] occurred at disk power-on lifetime: 34120 hours (1421
days + 16 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 06 06 ca c8 40 00 Error: UNC at LBA =
0x10606cac8 = 4396075720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
60 00 38 00 60 00 01 06 06 d6 8d 40 08 39d+03:22:33.695 READ FPDMA
QUEUED
60 04 00 00 58 00 01 06 06 d2 8d 40 08 39d+03:22:33.695 READ FPDMA
QUEUED
60 03 c8 00 50 00 01 06 06 ca c5 40 08 39d+03:22:33.691 READ FPDMA
QUEUED
60 04 00 00 48 00 01 06 06 ce 8d 40 08 39d+03:22:33.669 READ FPDMA
QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 39d+03:22:33.669 SET FEATURES
[Enable SATA feature]
Error 238 [21] occurred at disk power-on lifetime: 34120 hours (1421
days + 16 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 06 06 ca c8 40 00 Error: UNC at LBA =
0x10606cac8 = 4396075720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
60 04 00 00 38 00 01 06 06 ca 8d 40 08 39d+03:22:30.948 READ FPDMA
QUEUED
60 04 00 00 30 00 01 06 06 c6 8d 40 08 39d+03:22:30.942 READ FPDMA
QUEUED
60 04 00 00 28 00 01 06 06 c2 8d 40 08 39d+03:22:30.936 READ FPDMA
QUEUED
60 04 00 00 20 00 01 06 06 be 8d 40 08 39d+03:22:30.930 READ FPDMA
QUEUED
60 04 00 00 18 00 01 06 06 ba 8d 40 08 39d+03:22:30.912 READ FPDMA
QUEUED
Error 237 [20] occurred at disk power-on lifetime: 34120 hours (1421
days + 16 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 06 03 15 88 40 00 Error: UNC at LBA =
0x106031588 = 4395832712
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
60 00 f8 00 e8 00 01 06 03 20 8d 40 08 39d+03:22:25.625 READ FPDMA
QUEUED
60 04 00 00 e0 00 01 06 03 1c 8d 40 08 39d+03:22:25.625 READ FPDMA
QUEUED
60 03 08 00 d8 00 01 06 03 15 85 40 08 39d+03:22:25.625 READ FPDMA
QUEUED
61 00 02 00 d0 00 00 00 0e f4 05 40 08 39d+03:22:25.625 WRITE FPDMA
QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 39d+03:22:25.600 FLUSH CACHE EXT
Error 236 [19] occurred at disk power-on lifetime: 34120 hours (1421
days + 16 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 06 03 15 88 40 00 Error: UNC at LBA =
0x106031588 = 4395832712
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
60 04 00 00 98 00 01 06 03 14 8d 40 08 39d+03:22:22.857 READ FPDMA
QUEUED
60 04 00 00 90 00 01 06 03 10 8d 40 08 39d+03:22:22.851 READ FPDMA
QUEUED
60 04 00 00 88 00 01 06 03 0c 8d 40 08 39d+03:22:22.844 READ FPDMA
QUEUED
60 04 00 00 80 00 01 06 03 08 8d 40 08 39d+03:22:22.839 READ FPDMA
QUEUED
60 04 00 00 78 00 01 06 03 04 8d 40 08 39d+03:22:22.832 READ FPDMA
QUEUED
Error 235 [18] occurred at disk power-on lifetime: 34120 hours (1421
days + 16 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 05 bc f9 ed 40 00 Error: UNC at LBA =
0x105bcf9ed = 4391238125
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
60 04 00 00 c0 00 01 05 bc fd 8d 40 08 39d+03:21:45.031 READ FPDMA
QUEUED
60 00 78 00 b8 00 01 05 bc f9 ed 40 08 39d+03:21:45.031 READ FPDMA
QUEUED
60 00 80 00 b0 00 01 05 bc fa 65 40 08 39d+03:21:45.013 READ FPDMA
QUEUED
60 00 80 00 a8 00 01 05 bc fa e5 40 08 39d+03:21:45.010 READ FPDMA
QUEUED
60 00 80 00 a0 00 01 05 bc fb 65 40 08 39d+03:21:45.010 READ FPDMA
QUEUED
Error 234 [17] occurred at disk power-on lifetime: 34120 hours (1421
days + 16 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 05 bc f9 e8 40 00 Error: UNC at LBA =
0x105bcf9e8 = 4391238120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
60 00 28 00 70 00 01 05 bc fd 65 40 08 39d+03:21:41.802 READ FPDMA
QUEUED
60 00 80 00 68 00 01 05 bc fc e5 40 08 39d+03:21:41.802 READ FPDMA
QUEUED
60 00 80 00 60 00 01 05 bc fc 65 40 08 39d+03:21:41.802 READ FPDMA
QUEUED
60 00 80 00 58 00 01 05 bc fb e5 40 08 39d+03:21:41.801 READ FPDMA
QUEUED
60 00 80 00 50 00 01 05 bc fb 65 40 08 39d+03:21:41.801 READ FPDMA
QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 35408
1655189241
# 2 Extended offline Completed: read failure 90% 29310
4396065184
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 26 Celsius
Power Cycle Min/Max Temperature: 23/29 Celsius
Lifetime Min/Max Temperature: 0/57 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (82)
Index Estimated Time Temperature Celsius
83 2015-11-27 07:35 26 *******
... ..(109 skipped). .. *******
193 2015-11-27 09:25 26 *******
194 2015-11-27 09:26 27 ********
195 2015-11-27 09:27 26 *******
... ..( 6 skipped). .. *******
202 2015-11-27 09:34 26 *******
203 2015-11-27 09:35 27 ********
204 2015-11-27 09:36 26 *******
... ..( 46 skipped). .. *******
251 2015-11-27 10:23 26 *******
252 2015-11-27 10:24 27 ********
253 2015-11-27 10:25 26 *******
254 2015-11-27 10:26 27 ********
255 2015-11-27 10:27 26 *******
256 2015-11-27 10:28 27 ********
257 2015-11-27 10:29 27 ********
258 2015-11-27 10:30 26 *******
259 2015-11-27 10:31 27 ********
... ..( 3 skipped). .. ********
263 2015-11-27 10:35 27 ********
264 2015-11-27 10:36 26 *******
... ..( 6 skipped). .. *******
271 2015-11-27 10:43 26 *******
272 2015-11-27 10:44 27 ********
273 2015-11-27 10:45 26 *******
... ..( 24 skipped). .. *******
298 2015-11-27 11:10 26 *******
299 2015-11-27 11:11 27 ********
300 2015-11-27 11:12 26 *******
... ..( 8 skipped). .. *******
309 2015-11-27 11:21 26 *******
310 2015-11-27 11:22 27 ********
311 2015-11-27 11:23 27 ********
312 2015-11-27 11:24 26 *******
313 2015-11-27 11:25 26 *******
314 2015-11-27 11:26 27 ********
315 2015-11-27 11:27 27 ********
316 2015-11-27 11:28 26 *******
... ..( 12 skipped). .. *******
329 2015-11-27 11:41 26 *******
330 2015-11-27 11:42 27 ********
331 2015-11-27 11:43 26 *******
... ..( 51 skipped). .. *******
383 2015-11-27 12:35 26 *******
384 2015-11-27 12:36 27 ********
385 2015-11-27 12:37 26 *******
... ..( 6 skipped). .. *******
392 2015-11-27 12:44 26 *******
393 2015-11-27 12:45 27 ********
394 2015-11-27 12:46 27 ********
395 2015-11-27 12:47 27 ********
396 2015-11-27 12:48 26 *******
... ..( 4 skipped). .. *******
401 2015-11-27 12:53 26 *******
402 2015-11-27 12:54 27 ********
403 2015-11-27 12:55 26 *******
... ..( 7 skipped). .. *******
411 2015-11-27 13:03 26 *******
412 2015-11-27 13:04 27 ********
413 2015-11-27 13:05 26 *******
... ..( 14 skipped). .. *******
428 2015-11-27 13:20 26 *******
429 2015-11-27 13:21 27 ********
430 2015-11-27 13:22 27 ********
431 2015-11-27 13:23 26 *******
432 2015-11-27 13:24 27 ********
433 2015-11-27 13:25 27 ********
434 2015-11-27 13:26 27 ********
435 2015-11-27 13:27 26 *******
436 2015-11-27 13:28 27 ********
437 2015-11-27 13:29 27 ********
438 2015-11-27 13:30 26 *******
439 2015-11-27 13:31 27 ********
440 2015-11-27 13:32 26 *******
441 2015-11-27 13:33 27 ********
442 2015-11-27 13:34 26 *******
... ..( 4 skipped). .. *******
447 2015-11-27 13:39 26 *******
448 2015-11-27 13:40 27 ********
449 2015-11-27 13:41 26 *******
450 2015-11-27 13:42 26 *******
451 2015-11-27 13:43 26 *******
452 2015-11-27 13:44 27 ********
453 2015-11-27 13:45 26 *******
... ..( 13 skipped). .. *******
467 2015-11-27 13:59 26 *******
468 2015-11-27 14:00 27 ********
469 2015-11-27 14:01 27 ********
470 2015-11-27 14:02 26 *******
... ..( 14 skipped). .. *******
7 2015-11-27 14:17 26 *******
8 2015-11-27 14:18 27 ********
9 2015-11-27 14:19 26 *******
... ..( 72 skipped). .. *******
82 2015-11-27 15:32 26 *******
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 1233870 Vendor specific
_______________________________________________
pld-users-pl mailing list
[email protected]
http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
