Szanowni koledzy i koleżanki :-)
Mam sobie płytę jak w temacie i dysk 40 GB.
Robię sobie hdparm -d1 /dev/hdb i dupa.
Czy ktoś z czymś takim walczył ? Jakieś sugestie .. każda (poza zmianą płyty
głównej) mile widziana :-)
hdparm -d1 /dev/hdb
/dev/hdb:
setting using_dma to 1 (on)
using_dma = 0 (off)
HDIO_SET_DMA failed: Operation not permitted
^^^^^^^^^^^^^^^^^^^^ nigdy wcześniej nie miałem czegoś takiego,
ale nie uzywałem tej płyty głównej.
BARDZO ciekawy komunikat w dmesg'u znalazłem :
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide0: Speed warnings UDMA 3/4/5 is not functional.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
/dev/hdb:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 77545/16/63, sectors = 78165360, start = 0
hdparm -I /dev/hdb daje nam :
ATA device, with non-removable media
Model Number: ST340810A
Serial Number: 5FB8ZCET
Firmware Revision: 3.99
Standards:
Supported: 6 5 4 3
Likely used: 6
Configuration:
Logical max current
cylinders 16383 4047
heads 16 16
sectors/track 63 255
--
CHS current addressable sectors: 16511760
LBA user addressable sectors: 78165360
device size with M = 1024*1024: 38166 MBytes
device size with M = 1000*1000: 40020 MBytes (40 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0040)
Recommended acoustic management value: 128, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Device Configuration Overlay feature set
* Automatic Acoustic Management feature set
SET MAX security extension
* Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 1 determined by the jumper
Checksum: correct
==================================================
lspci -v :
00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02)
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [a106]
Capabilities: [a0] AGP version 3.0
00:01.0 PCI bridge: Intel Corp.: Unknown device 2571 (rev 02) (prog-if 00
[Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fd900000-fe9fffff
Prefetchable memory behind bridge: f3f00000-f7efffff
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e400 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e800 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ec00 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02)
(prog-if 20 [EHCI])
Subsystem: Intel Corp.: Unknown device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2080]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) (prog-if 8a
[Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at fc00 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [disabled] [size=1K]
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02)
Subsystem: Intel Corp.: Unknown device 24d0
Flags: medium devsel, IRQ 17
I/O ports at 0c00 [size=32]
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 03)
(prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G400 32Mb SGRAM
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at f4000000 (32-bit, prefetchable) [size=32M]
Memory at fe9fc000 (32-bit, non-prefetchable) [size=16K]
Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fe9e0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Surecom Technology EP-320X-R
Flags: bus master, medium devsel, latency 32, IRQ 18
I/O ports at d800 [size=256]
Memory at feafef00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
02:04.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871 (rev 03)
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at dc00 [disabled] [size=256]
Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at feae0000 [disabled] [size=64K]
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping : 9
cpu MHz : 2600.140
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 5190.45
--
Adam Jurkiewicz : Inżynier Serwisu Linux
HERC : Linuxowe Systemy Sprzeday Detalicznej
[ http://www.linux.herc.com.pl ]
Numer Gadu-Gadu : 302315
_________________________________________
http://pld-linux.org/ = faq, howto, newsy
dostales tutaj odpowiedz na swoje pytanie?
podziel sie z innymi i dopisz do FAQ!
http://pld-linux.org/FAQ/
