Dnia sob 03. stycznia 2004 02:24, [EMAIL PROTECTED] napisał: > JR> ifconfig ? route -n ? > ifconfig > > > eth0 Link encap:Ethernet HWaddr 00:C0:26:A3:33:F7 > inet addr:192.168.1.9 Bcast:192.168.1.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > Interrupt:16 Base address:0x9000 dziwne, że RX i TX jest 0 ......
> lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Tu też te zera są dziwne ....... > route -n > > > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 > 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 > 0 eth0 No niby wszystko jest OK, ale ........... coś mi z tymi erami nie pasuje ....... -- Jacek Rzęsista GG 61213 _________________________________________ http://pld-linux.org/ = faq, howto, newsy dostales tutaj odpowiedz na swoje pytanie? podziel sie z innymi i dopisz do FAQ! http://pld-linux.org/FAQ/
