Dnia wtorek, 1 lutego 2005 10:37, Łukasz Maśko napisał: > [...]
usb 1-2: new full speed USB device using ohci_hcd and address 11 SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. Vendor: USB NAND Model: FLASH DISK Rev: 0.20 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 SCSI device sda: 64000 512-byte hdwr sectors (33 MB) sda: assuming Write Enabled SCSI device sda: 64000 512-byte hdwr sectors (33 MB) sda: assuming Write Enabled /dev/scsi/host0/bus0/target0/lun0: unknown partition table Attached scsi removable disk sda at scsi0, channel0, id 0, lun 0 Mimo wszystko nie działa montowanie /dev/sda. Dzisiaj jeszcze spróbuję pomieszać z partycjami. Żeby się zabezpieczyć wystarczy dd if=/dev/sda of=kopia.bin ? -- pozdrawiam, PriSM (Michał Łukaszek) _______________________________________________ pld-users-pl mailing list [email protected] http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
